The present study proposed the equivalent test method for the strong electromagnetic field radiation of electric explosive devices (EEDs) of the weapon equipment to satisfy the military requirements of the electromagnetic radiation safety test, as well as the evaluation of the electric ignition, the electric initiation ammunition, or missiles. Under stable conditions, the ignition excitation test and the bridge wire temperature increase test were performed to determine the ignition temperature of the EED. As radiated by the strong electromagnetic field, the relationship between the temperature increase of the bridge wire and the electric field intensity of the EED was developed based on the theoretical analysis and the experimental test. Given the ignition temperature of the EED, the radiation field intensity of the EED at 50% ignition was determined. As compared with the 50% ignition field intensity of the EED directly radiated by the strong electromagnetic field, an error less than 1 dB was caused. On that basis, the correctness of the equivalent test method was verified. Accordingly, this method was suggested to act as an effective method and technical means to test and evaluate the electromagnetic radiation safety of ammunition and missiles in unfavorable electromagnetic environments.
This paper describes a new method to determine the phase angle errors of ac shunts by measuring the inductance and distributed capacitance. A 1-Ω shunt of coaxial design has been developed as the time constant standard. A coaxial inductor with identical structure as the time constant standard has been developed. A four-terminal mutual inductor has also been built for the measurement of the inductance of the time constant standard. The method is based on the use of a binary inductive current divider to compare the inductor with the mutual inductor. The standard uncertainty of the inductance measurement of the time constant standard is within 28 pH at frequencies up to 200 kHz. The expanded uncertainty of the phase angle errors is from 0.4 μrad at 1 kHz to 80.0 μrad at 200 kHz at 1 A.
31 March 2024 in International Journal of Antennas and Propagation
The electromagnetic radiation sensitivity of the electric explosive device (EED) and its installed use state is closely related to the size of the equipment and radiation field strength constraints. The use of the traditional all-level electromagnetic radiation method for the effect of the actual installed EED test in the electromagnetic environment simulation encountered a technical bottleneck. The microwave band is difficult to effectively assess through the current standing wave distribution and skin effect. The temperature rise of the EED bridge wire has no relationship with the frequency of the electromagnetic wave. In this paper, through the analysis of the electromagnetic effect mechanism of the EED, the coupled power model of electromagnetic irradiation of the EED is obtained, and the relationship between the temperature rise of the bridge wire of the EED and the electric field strength model is established. Under the action of high-frequency continuous waves, the electromagnetic effect of the device is tested to verify the correctness of the mechanism analysis of the electromagnetic effect of the device under the action of continuous waves. The results provide crucial technical support for the electromagnetic protection of the device under the harsh electromagnetic environment of the battlefield.