The dissolution of dolomite can not only provide the chemical components in hot springs but also provide a high-quality reservoir for geothermal resources. However, there is still debate about the main controlling factors and mechanisms of the dissolution process of dolomite. The Shuijing hot springs in Guizhou Province are rich in SO₄²⁻ and the geothermal reservoir is dolomite, which provides an excellent opportunity to understand the role of SO₄²⁻ in the dissolution process of dolomite. In this paper, water–rock interaction experiments were conducted at different temperatures to study the effects of SO₄²⁻, pH, and CO₂ on the dissolution of dolomite from the Shuijing hot springs geothermal reservoir. The results indicate that temperature is a significant factor affecting the chemical composition of hot springs water, with higher temperatures having a more pronounced effect on the dissolution of dolomite. At lower temperatures of 25 °C and 90 °C, the molar ratio of the released Ca²⁺ and Mg²⁺ during the dissolution of dolomite in the initial reaction stage generally approaches the Ca/Mg molar ratio of dolomite, exhibiting congruent dissolution. However, at elevated temperatures of 150 °C, the released Ca/Mg molar ratio surpasses the Ca/Mg molar ratio of dolomite, demonstrating an incongruent dissolution characteristic with Ca²⁺ being preferentially released over Mg²⁺. Additionally, the relative importance of CO₂, SO₄²⁻ and pH on the dissolution degree of dolomite is CO₂ > SO₄²⁻ > pH = 4 > pH = 7 > pH = 10. The promotion effect of SO₄²⁻ on dolomite dissolution indicates that the greater the SO₄²⁻ concentration, the stronger the dissolution of dolomite, and its dissolution ability is enhanced with the increase in temperature. Furthermore, the effect of CO₂ on the dissolution of dolomite is stronger than that of SO₄²⁻, leading to the oscillating fluctuation trend of the released Ca²⁺ and Mg²⁺.

Shiqian County, located within a key geothermal fluids belt in Guizhou Province, China, has abundant underground hot water resources. Therefore, elucidating the hydrogeochemical characteristics and formation mechanisms of thermal mineral water in this area is essential for evaluating and sustainably utilizing regional geothermal fluids. This study focuses on the Shiqian Hot Spring Group and employs integrated analytical techniques, including rock geochemistry, hydrogeochemistry, isotope hydrology, digital elevation model (DEM) data analysis, remote sensing interpretation, geological surveys, mineral saturation index calculations, and PHREEQC-based inverse hydrogeochemical modeling, to elucidate its hydrogeochemical characteristics and formation mechanisms. The results show that strontium concentrations range from 0.06 to 7.17 mg/L (average 1.65 mg/L) and metasilicic acid concentrations range from 19.46 to 65.51 mg/L (average 33.64 mg/L). Most samples meet the national standards for natural mineral water and are classified as Sr-metasilicic acid type. Isotope analysis indicates that the geothermal water is recharged by meteoric precipitation at elevations between 911 m and 1833 m, mainly from carbonate outcrops and fracture zones on the southwestern slope of Fanjingshan, and discharges south of Shiqian County. The dominant hydrochemical types are HCO₃·SO₄-Ca·Mg and HCO₃-Ca·Mg. Strontium is primarily derived from carbonate rocks and celestite-bearing evaporites, whereas metasilicic acid mainly originates from quartz dissolution along the upstream groundwater flow path. PHREEQC-based inverse modeling indicates that, during localized thermal mineral water runoff in the middle-lower reaches or discharge areas, calcite dissolves while dolomite and quartz tend to precipitate, reflecting calcite dissolution-dominated water–rock interactions and near-saturation conditions for some minerals at late runoff stages.