A new concept for a deployable autonomous control system (DACS) was recently developed by the authors to achieve short-term vibration mitigation in lightweight structures. With the details of the deployability and autonomy aspects having already described, this article focuses on experimentally evaluating the performance of the DACS in suppressing the lateral vibrations of pedestrian bridges. A real-time hybrid simulation (RTHS) methodology was employed as the experimental tool to achieve this goal. In the RTHS procedure employed in this study, the pedestrian bridge was modeled numerically, and the DACS was tested physically on a hydraulic shake table that reproduced the bridge displacements. The RTHS methodology is a well-established experimental technique for lumped-parameter building structures, but it involves implementation challenges when applied to pedestrian bridges where the location of the load is spatially varying. Using modal decomposition principles, a discrete state-space formulation is presented that can be used for the RTHS of bridges. This method allows moving loads and DACS mobility to be considered during RTHS. Following the experimental modeling of the DACS prototype, the reliability of the characterized DACS model was validated through a series of single-degree-of-freedom hybrid simulations. The RTHS of a pedestrian bridge equipped with the DACS was carried out to experimentally evaluate the effectiveness of the DACS. A linear-quadratic Gaussian-based controller capable of compensating for the interaction effects between the structural response and DACS is presented.
Cable-driven automated people movers (APMs) are complex, dynamic systems that are comprised of many critical rotating components such as bearings, gears, shafts, and line sheaves. Consequently, these systems are susceptible to a number of faults such as bearing failures, shaft misalignments, or gear tooth deterioration. Due to the continual operative nature of many APM systems, downtimes due to faults or superfluous maintenance can result in significant economic losses. Recently, preventative maintenance strategies have become an attractive alternative to traditional run-to-failure or scheduled maintenance strategies. Condition-based maintenance is a preventative maintenance strategy that works by detecting incipient faults within the critical components of a system through the identification of anomalies within condition indicators extracted from their vibration signatures. A fault is detected when a condition indicator exceeds a prescribed failure threshold. Traditionally, these failure thresholds are based on historical precedents or failure data obtained from similar specimens. However, due to their longevity and bespoke construction, many APMs lack the historical failure data required to define these failure thresholds in the traditional way. In this paper, an automated CBM framework developed specifically for a cable-driven APM gearbox is presented. The framework utilizes a state-based Gaussian mixture modeling approach to account for variations in operating conditions resulting from frequent start and stop phases, variations in passenger load, and fluctuations in cable tension, among other variables. Failure threshold setting is accomplished using a hierarchical Bayesian approach, which utilizes past and present data to set thresholds that adapt to changing health state of the machine over its lifespan. In addition to real-time monitoring, the proposed framework utilizes the collected data to model the degradation of the system in order to generate an estimate of its remaining useful life. The combination of short-term preventative maintenance (real-time fault detection) and long-term predictive maintenance coupled with automation, makes the presented approach a highly efficient tool for maintenance planning.