The behavior of thermo-mechanical stresses in functionally graded axisymmetric rotating hollow disks with variable thickness is analyzed. The material is assumed to be functionally graded in the radial direction. First, a two-dimensional axisymmetric model of the functionally graded rotating disk is developed using the finite element method. Exact solutions for stresses are then obtained assuming that the plane theory of elasticity holds. These solutions are in accordance with finite element ones, thus showing the validity of the assumption. Finally, in order to reduce the maximum equivalent stress along the radius, the optimization of the material distribution is addressed. To avoid subsequent finite element simulations in the optimization process, which can be computationally demanding, a nonlinear constrained optimization problem is proposed, for which the solution is obtained numerically by the sequential quadratic programming method, showing prominent results in terms of equivalent stress uniformity.
One of the main requirements in the design of structures made of functionally graded materials is their best response when used in an actual environment. This optimum behaviour may be achieved by searching for the optimal variation of the mechanical and physical properties along which the material compositionally grades. In the works available in the literature, the solution of such an optimization problem usually is obtained by searching for the values of the so called heterogeneity factors (characterizing the expression of the property variations) such that an objective function is minimized. Results, however, do not necessarily guarantee realistic structures and may give rise to unfeasible volume fractions if mapped into a micromechanical model. This paper is motivated by the confidence that a more intrinsic optimization problem should a priori consist in the search for the constituents’ volume fractions rather than tuning parameters for prefixed classes of property variations. Obtaining a solution for such a class of problem requires tools borrowed from dynamic optimization theory. More precisely, herein the so-called Pontryagin Minimum Principle is used, which leads to unexpected results in terms of the derivative of constituents’ volume fractions, regardless of the involved micromechanical model. In particular, along this line of investigation, the optimization problem for axisymmetric bodies subject to internal pressure and for which plane elasticity holds is formulated and analytically solved. The material is assumed to be functionally graded in the radial direction and the goal is to find the gradation that minimizes the maximum equivalent stress. A numerical example on internally pressurized functionally graded cylinders is also performed. The corresponding solution is found to perform better than volume fraction profiles commonly employed in the literature.
Material property variation in non-homogeneous internally pressurized thick-walled cylinders is investigated within the context of dynamic programming theory. The material is assumed to be linear, elastic, isotropic, and functionally graded in the radial direction. Based on the plane stress hypothesis, a state space formulation is given and the optimal control problem is stated and solved by means of Pontryagin’s Principle for different objective functionals. Optimal Young’s modulus distribution is found to be piecewise linear along the radial domain. A brief digression on the possible existence of switching points is addressed. Finally, a numerical example is performed within a special class of derived optimal solutions, showing promising results in terms of equivalent stress reduction with respect to the most used variations in literature.
1 August 2021 in International Journal of Pressure Vessels and Piping