Energy sustainability and environmental issues pose greater challenges on different primary energy sectors as the global energy demand increases and it is projected to further increase with an upsurge in population. On the other hand, energy sources from conventional fossil-based fuels are depleting, forcing explorations in challenging and difficult locations. As a result, the use of alternative fuels received dramatic consideration to substitute these conventional fuels, of which natural gas took the significant share. However, the share of natural-gas vehicles in the current vehicle market is quite small, and it is estimated to be below 5%. This paper reviews the current resource scenarios including proven and potential reserves, current production, and consumption, along with the fueling infrastructure, distribution, and storage. It also provides summary of the development of fuel-injection technologies aimed to enhance the performance of gas engines. More attention was also given to natural-gas engines and their limitations. Parameters affecting the performance and combustion of compressed natural gas (CNG) in spark-ignition (SI) engines are thoroughly assessed, among which compression ratio and injection timing play major roles in the optimization of CNG-fueled engines. Furthermore, different technologies that help close the performance gap between conventional liquid-fuel and natural-gas engines and future directions of the research are presented.

The adverse environmental effects from fossil fuels and their depletion through time push the world to consider sustainable and environmentally friendly forms of energy sources. The advancement put forward to improve the performance of Solar energy has made it to be one of the potential alternative energy sources in the years ahead. This paper, therefore, assesses the strength, weakness, opportunities and threats (SWOT) of using solar energy. The suitability of solar energy to the environment, minimal cost in the long ran, and its versatility are few to mention among other significant advantages of this energy source to get noticeable attention in an effort to substitute fossil fuels. The expected cost reduction through time with the technology advancement is also taken as opportunity to use solar energy. However, using solar energy has also weaknesses and threats which yet require further attentions. The low efficiency, high initial cost, energy storage requirement are some of the challenges. In addition, shifting the energy source for industries from fossil fuel to solar energy remains as a challenge due to the utilities which are already in place and working with conventional fuels. Although some of the weaknesses and threats to solar energy application still exist, through technology advancement most of the problems would be addressed in the future.

The field of nanotechnology has shown promise in addressing major problems and improving drilling effectiveness. An overview of the difficulties encountered during oil and gas well drilling operations and the demand for creative solutions opens the debate. This review explores how nanotechnology is transforming the oil industry and enhancing performance as a whole. The evaluation of the uses of nanotechnology for better oil recovery, real-time monitoring, innovative materials, drilling fluids, and reservoir characterization are extensively discussed in this review. The primary function of additives is to improve the fundamental characteristics of drilling fluids. The variety of fluid additives available is a reflection of the complex drilling–fluid systems that are currently being used to enable drilling in increasingly difficult subsurface conditions. Common additives used in water- and oil-based drilling fluids include lubrication, shale stability, filtration control, rheology control, viscosification, and pH regulation. Drilling fluids frequently contain filtration control additives such as starch, polyanionic cellulose (PAC), carboxymethyl cellulose (CMC), and nanoparticles (NP). Commonly used rheology-modifier additives are xanthan gum, carboxymethyl cellulose, guar gum powder, and, more recently, salt-responsive zwitterionic polymers that were used as viscosifiers to water-based drilling fluids. The three main additives that regulate pH are citric acid monohydrate, potassium hydroxide, and sodium hydroxide. Additives that stabilize shale, such as potassium and sodium salts and asphaltenes, are often used. A wide range of materials are included in the category of lubricating additives, including polymers, asphaltenes, glass beads, oils of various grades, and oil-surfactants. Various fibrous materials, including wood, cotton, fibrous minerals, shredded tires from vehicles, and paper pulp, are used as additives to control circulation. Furthermore, shredded cellophane, bits of plastic laminate, plate-like minerals like mica flakes, granulated inert materials such as nut shells, and nano-polymers are used in wellbores to reduce fluid loss. The incorporation of nanoparticles into drilling fluids has produced upgraded fluids with better features, including improved lubricity, thermal stability, and filtering capacities. These developments aid in lowering friction, enhancing wellbore stability, and enhancing drilling efficiency. This paper also emphasizes how nanotechnology has made enhanced drilling equipment and materials possible. Drilling equipment’s longevity and performance are increased by nanocomposite materials that have been reinforced with nanoparticles due to their improved mechanical strength, wear resistance, and thermal stability. Advanced reservoir characterisation tools, including nanoparticle tracers and nanoscale imaging methods, can help locate the best drilling sites and increase production effectiveness. On the other hand, nanofluids and nanoemulsions can potentially increase oil recovery because they enhance fluid mobility, lower interfacial tension, and alter rock wettability. Although nanotechnology has many advantages, there are also issues that need to be resolved. For an implementation to be effective, factors including nanoparticle stability, dispersion, and potential environmental effects must be carefully taken into account. This review highlights the need for future research to create scalable manufacturing procedures, improve nanoparticle behaviour, and determine nanomaterials’ long-term environmental effects. In conclusion, this in-depth analysis illustrates the use of nanotechnology in transforming the process of drilling oil and gas wells.

The use of solar energy is now a common and modern alternative that many countries throughout the world have adopted. Different studies on PV systems have been documented in the literature; however, several reviews focus excessively on particular facets of solar modules. In this paper, the literature on PV systems published between 2000 and 2023 was reviewed thoroughly. This review is structured in three main parts. Primarily, the main factors impacting dust deposition on solar modules are discussed. These include temperature, wind speed, inclination angle, location, climatic conditions, photovoltaic module surface characteristics, and dust characteristics. Many methods for mitigating and reducing dust as well as approaches to cleaning PV modules are also reviewed in this study. The many types of solar modules, together with their most important characteristics and operational effectiveness, are presented. As more solar photovoltaic panels expand their end of life (EOL), solutions are required to recycle and dispose of solar photovoltaic panels at the lowest economic cost and with the least environmental damage through reduced carbon emissions and greenhouse gases. Subsequently, this paper further reviews solar PV energy for a green environment and PV waste recycling and its costs. Moreover, integrating solar energy with other clean energy constituting an energy source for hard-to-reach areas and an alternative to fuel are discussed. Therefore, this comprehensive review of the use of photovoltaic systems for green energy production is helpful in an increased share of clean energy for various energy sectors in the future.