The absence of sufficient knowledge of the heterogeneous damage behaviour of textile reinforced composites, especially under combined in-plane and out-of-plane loadings, requires the development of multi-scale experimental and numerical methods. In the scope of this paper, three different types of plain weave fabrics with increasing areal weight were considered to characterise the influence of ondulation and nesting effects on the damage behaviour. Therefore an advanced new biaxial testing method has been elaborated to experimentally determine the fracture resistance at the combined biaxial loads. Methods in image processing of the acquired in-situ CT data and micrographs have been utilised to obtain profound knowledge of the textile geometry and the distribution of the fibre volume content of each type. Combining the derived data of the idealised geometry with a numerical multi-scale approach was sufficient to determine the fracture resistances of predefined uniaxial and biaxial load paths. Thereby, Cuntze’s three-dimensional failure mode concept was incorporated to predict damage and failure. The embedded element method was used to obtain a structured mesh of the complex textile geometries. The usage of statistical and visualisation methods contributed to a profound comprehension of the ondulation and nesting effects.
This study investigates the damage-dependent permeability properties of polyamide 6 based carbon fiber-reinforced thermoplastic composites (CF-PA6) by analyzing the gas permeability differences before and after low-velocity impact loading. For this, a high-pressure permeability test rig was developed and is presented which allows quantitative measurements of gas leakage through composites. Two types of composites, braided and unidirectional cross-plies, were analyzed. As the textile architecture effects the damage structure, this allows a larger variety of damages and thus deeper understanding of the damage dependent permeability properties. Prior to impact loading, both braided and unidirectional cross-ply specimens exhibited near-FICKian gas diffusion behavior. However, permeability measurements revealed a significant difference between both, with unidirectional cross-ply specimens demonstrating 10 times higher permeability compared to the braided specimens. Microstructural investigations attributed this disparity to the higher crack density observed in unidirectional cross-ply specimens. Post impact loading, the permeability of both specimen types increased significantly by several orders of magnitude and showed no agreement with FICK’s law. Microstructural analysis revealed the formation of interconnected crack networks throughout the impacted specimens, which facilitated large gas flows through the damaged regions. The study shows that the presented test rig is capable of measuring gas permeability through composites in a large range, from diffusion driven processes (∼ 10−14 𝑚2∕𝑠) up to gas flow driven processes through damage networks (up to ∼ 10−9 𝑚2∕𝑠). Additionally, the study shows the complex relationship between damage and permeability, e.g. how internal damage influences permeability and how the gas transport changes as soon as cross-linked crack networks are present.