In our work, Cr2Si2Te6, a novel two-dimensional (2D)-layered ferromagnetic insulator, was used as a saturable absorber (SA) for demonstrating a pulsed Er-doped fiber laser (EDFL) based on its nonlinear saturable absorption properties. The modulation depth and saturation intensity of the Cr2Si2Te6-based SA are 6.61% and 10.77 MW/cm2, respectively. When the pump power is 60.3 mW, the 13th harmonic mode-locked generation is obtained, the 3 dB optical spectrum bandwidth is 1.392 nm and the central wavelength is 1568.032 nm. When the pump power is higher than 170.3 mW, the EDFL works at the fundamental repetition frequency of 1.23 MHz with a signal-to-noise ratio of 25 dB. The experimental results reveal that Cr2Si2Te6 SA has enormous potential in demonstrating ultrafast fiber lasers and provide references for future research based on Cr2Si2Te6 as ultrafast optical modulators.
In our work, passively mode-locked and Q-switched Er-doped fiber lasers (EDFLs) based on titanium disulfide (TiS2) as a saturable absorber (SA) were generated successfully. Stable mode-locked pulses centred at 1531.69 nm with the minimum pulse width of 2.36 ps were obtained. By reducing the length of the laser cavity and optimizing the cavity loss, Q-switched operation with a maximum pulse energy of 67.2 nJ and a minimum pulse duration of 2.34 µs was also obtained. Its repetition rate monotonically increased from 13.17 kHz to 48.45 kHz with about a 35 kHz tuning range. Our experiment results fully indicate that TiS2 exhibits excellent nonlinear absorption performance and significant potential in acting as ultra-fast photonics devices.
In the current paper, the nonlinear absorption characteristics and laser modulation performance of the ternary anisotropic semiconductor material ZrGeTe4 were successfully explored. The recovery time of the ZrGeTe4-PVA thin film was measured to be 5.74 ps by the pump–probe technology. By employing ZrGeTe4 as a saturable absorber, a passive mode-locked Yb-doped fiber laser was demonstrated for the first time. In the 1 µm mode-locked operation, the central wavelength was 1031.29 nm, the pulse repetition rate was 24.85 MHz, and the pulse width was 786.3 ps. In an Er-doped fiber laser operating at a wavelength of 1561.10 nm, the pulse width was as short as 1.26 ps with a repetition rate of 4.38 MHz. The results show that ZrGeTe4 has excellent broadband nonlinear optical characteristics.
A ferromagnetic insulator Cr2Ge2Te6 as a saturable absorber in an Er-doped fiber laser (EDFL) was demonstrated. In this work, a CGT-PVA composite film was successfully fabricated using the liquid-phase exfoliation method and employed in an EDFL. The modulation depth and saturation intensity of the SA are 4.26% and 89.40 MW/cm2, respectively. Stable pulses with a minimum pulse width of 978.5 fs when the repetition rate was 3.25 MHz were recorded experimentally. Furthermore, stable solitons still need to be obtained when the pulse energy in the cavity is as high as 11.6 nJ. The results fully suggest that CGT has outstanding nonlinear absorption properties, which may have broad potential applications in ultrafast photons.
Abundant research findings have proved the value of two-dimensional (2D) materials in the study of nonlinear optics in fiber lasers. However, there remains two problems: how to reduce the start-up threshold, and how to improve the damage threshold, of fiber lasers based on 2D materials. A 15.1 mW low-threshold mode-locked fiber laser, based on a Cr2Si2Te6 saturable absorber (SA) prepared by the liquid-phase exfoliation method, is demonstrated successfully in this work. This provides a useful and economical method to produce SAs with low insertion loss and low saturation intensity. Besides, multiple high-order harmonics, from the fundamental frequency (12.6 MHz) to the 49th-order harmonic (617.6 MHz), mode-locked operations are recorded. The experimental results indicate the excellent potential of Cr2Si2Te6 as an optical modulator in exploring the soliton dynamics, harmonic mode locking, and other nonlinear effects in fiber lasers.
31 March 2021 in Frontiers of Information Technology & Electronic Engineering
In this study, titanium disulfide (TiS2) polyvinyl alcohol (PVA) film-type saturable absorber (SA) is synthesized with a modulation depth of 5.08% and a sa