Arsenic contamination in drinking water has become an increasingly important issue due to its high toxicity to humans. The present study focuses on the development of the yttrium-based adsorbents, with basic yttrium carbonate (BYC), Ti-loaded basic yttrium carbonate (Ti-loaded BYC) and yttrium hydroxide prepared using a co-precipitation method. The Langmuir isotherm results confirmed the maximum adsorption capacity of Ti-loaded BYC (348.5 mg/g) was 25% higher than either BYC (289.6 mg/g) or yttrium hydroxide (206.5 mg/g) due to its increased specific surface area (82 m2/g) and surface charge (PZC: 8.4). Pseudo first- and second-order kinetic models further confirmed that the arsenate removal rate of Ti-loaded BYC was faster than for BYC and yttrium hydroxide. It was subsequently posited that the dominant removal mechanism of BYC and Ti-loaded BYC was the carbonate-arsenate ion exchange process, whereas yttrium hydroxide was regarded to be a co-precipitation process. The Ti-loaded BYC also displayed the highest adsorption affinity for a wide pH range (3–11) and in the presence of coexisting anionic species such as phosphate, silicate, and bicarbonate. Therefore, it is expected that Ti-loaded BYC can be used as an effective and practical adsorbent for arsenate remediation in drinking water.
21 August 2018 in Environmental Geochemistry and Health
With the increasing use and application of engineered nanoparticles (ENPs) in a number industries, ENPs, through their unique properties, have made their way into the environment. However, the environmental fate and behavior of ENPs are largely unknown. Laboratory studies have shown that some ENPs have the potential for toxicity, suggesting they may affect organisms in the environment. To fully assess the risk of ENPs, a better estimation of exposure concentrations is needed. This requires an understanding of the stability and toxicity of nanoparticles (NPs) in the environment. This review presents a brief overview of the fate, behavior, and ecotoxicity of NPs in the environment. The fate and transport of NPs, which can be affected by various environmental conditions like light, pH, ionic strength, and type and concentration of cations, are important for the examination of the life cycle of NPs.