Lixin He

Lixin He


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 May 2022 in Coatings
Verified
Journal Article
Open access
PDF file
YPYing Pan
Ying Pan
GLGang Liu
Gang Liu
BCBeibei Chai
Beibei Chai
Xiaohui LeiXiaohui Lei
Xiaohui Lei
LHLixin He
Lixin He
Bin ChenBin Chen
Bin Chen
This study optimizes the modification and granulation of fly ash to make it more stable at the sediment–water interface. Through laboratory simulations, the modified fly ash pellets were optimally granulated to cover the sediment–water interface, and its control effect and mechanism were evaluated. The results showed that the phosphorus adsorption effect of lanthanum-modified fly ash was 34% and 40% higher compared with those of acid-modified and alkali-modified fly ash, respectively, with the phosphorus adsorption effect reaching 85%. The best dosing ratio was about 0.3 g/L. Adsorption was affected by pH and was more effective under weak alkalinity, close to the Langmuir adsorption model, which was consistent with the unimolecular layer adsorption characteristics and the presence of chemisorption and physical adsorption. The saturation adsorption amount of phosphate by lanthanum-modified fly ash was 8.89 mg/g. The optimized granulation conditions for lanthanum-modified fly ash pellets were a fly ash/montmorillonite ratio of 7:3, a roasting temperature of 900 °C, a roasting time of 4 h, and a particle size of 3 mm. After 20 days, the orthophosphate removal rate was more than 60% higher than that of the control group, with a total phosphorus removal rate of 43%. After covering for 60 days, active phosphorus in the surface layer of the sediment was gradually transformed into a stable phosphorus form, with calcium phosphorus accounting for 70% of the total inorganic phosphorus. The ability of the sediment to release phosphorus to the overlying water body was also significantly weakened. Meanwhile, the total phosphorus removal rate in the overlying water at the sediment–water interface reached more than 40%, and orthophosphate removal reached more than 60%, indicating an obvious phosphorus control effect. Transmission electron microscopy analysis showed that lanthanum was present at locations enriched with elemental phosphorus and was adsorbed onto the material surface. Therefore, lanthanum-modified fly ash pellets are a promising in situ phosphorus control agent with good endogenous phosphorus pollution control abilities in eutrophic water bodies.

25 February 2026 in Science of The Total Environment
Verified
Journal Article
Closed access
XHXionghao Hu
Xionghao Hu
KYKehong Yu
Kehong Yu
BCBeibei Chai
Beibei Chai
QTQingfeng Tang
Qingfeng Tang
XGXia Gao
Xia Gao
LHLixin He
Lixin He

28 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
ZXZhen-Guo Xing
Zhen-Guo Xing
LHLixin He
Lixin He
Shunxing LiangShunxing Liang
Shunxing Liang
LCLian-Bo Chang
Lian-Bo Chang
ZXZhi-Xia Xiao
Zhi-Xia Xiao
HLHongji Liu
Hongji Liu
The pouring time interval is the decisive factor of dual-liquid casting for bimetallic productions. Traditionally, the pouring time interval is fully determined by the operator’s experience and on-site observation. Thus, the quality of bimetallic castings is unstable. In this work, the pouring time interval of dual-liquid casting for producing low alloy steel/high chromium cast iron (LAS/HCCI) bimetallic hammerheads is optimized via theoretical simulation and experimental verification. The relevancies of interfacial width and bonding strength to pouring time interval are, respectively, established. The results of bonding stress and interfacial microstructure indicate that 40 s is the optimum pouring time interval. The effects of interfacial protective agent on interfacial strength–toughness are also investigated. The addition of the interfacial protective agent yields an increase of 41.5% in interfacial bonding strength and 15.6% in toughness. The optimum dual-liquid casting process is used to produce LAS/HCCI bimetallic hammerheads. Samples cut from these hammerheads show excellent strength–toughness (1188 Mpa for bonding strength and 17 J/cm2 for toughness). The findings could be a reference for dual-liquid casting technology. They are also helpful for understanding the formation theory of the bimetal interface.

20 November 2020 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
MSMeiqin Suo
Meiqin Suo
JZJing Zhang
Jing Zhang
LHLixin He
Lixin He
QZQian Zhou
Qian Zhou
TKTengteng Kong
Tengteng Kong
Evaluating the vulnerability of a water resources system is a multicriteria decision analysis (MCDA) problem including multiple indictors and different weights. In this study, a reinforced ordered weighted averaging (ROWA) operator is proposed by incorporating extended ordered weighted average operator (EOWA) and principal component analysis (PCA) to handle the MCDA problem. In ROWA, the weights of indicators are calculated based on component score coefficient and percentage of variance, which makes ROWA avoid the subjective influence of weights provided by different experts. Concretely, the applicability of ROWA is verified by assessing the vulnerability of a water resources system in Handan, China. The obtained results can not only provide the vulnerable degrees of the studied districts but also denote the trend of water resources system vulnerability in Handan from 2009 to 2018. And the indictor that most influenced the outcome is per capita GDP. Compared with EOWA referred to various indictor weights, the represented ROWA shows good objectivity. Finally, this paper also provides the vulnerability of the water resource system in 2025 based on ROWA for water management in Handan City.

24 October 2026 in Microorganisms
Verified
Journal Article
Open access
PDF file
111 1
1 1
BCBeibei Chai
Beibei Chai
YWYijie Wang
Yijie Wang
WCWenlong Chen
Wenlong Chen
CGCheng Gao
Cheng Gao
LHLixin He
Lixin He
Internal phosphorus release from sediments is an important limiting factor in the remediation of eutrophic water bodies. Tea-bag-encapsulated MgO-modified biochar has advantages in phosphorus adsorption, microbial attachment, and convenient recovery, but its long-term phosphorus control effect and associated microbial responses at the sediment–water interface remain unclear. In this study, a 124-day sediment–water simulation experiment combined with metagenomic sequencing was conducted to evaluate its effects on nitrogen and phosphorus removal, water environmental changes, and microbial phosphorus-cycling functions. The results showed that the removal efficiencies of phosphate, total phosphorus, ammonia nitrogen, and total nitrogen in the treatment group reached 88%, 67%, 90%, and 40%, respectively. After application, the BET specific surface area of the material decreased from 47.85 to 20.18 m2/g, obvious surface deposits appeared, and phosphorus enrichment was detected, indicating that the material continuously participated in interfacial phosphorus fixation. Meanwhile, the relative abundances of Anaerolinea and Nitrospira increased from 5.71% to 10.08% and from 0.72% to 1.06%, respectively. Functional gene analysis showed that the relative abundances of genes related to phosphorus sensing, transport, and polyphosphate metabolism changed, suggesting that the functional potential related to phosphorus acquisition and storage was adjusted. Since this study was based on a small-scale long-term simulation system, the contribution of the material was mainly interpreted through the stage-specific differences between BC and BT, material characterization, and microbial functional responses, while the independent effects of time-varying factors such as temperature and redox conditions still require further controlled experiments. Overall, the sustained phosphorus control effect of tea-bag-encapsulated MgO-modified biochar was mainly associated with interfacial material fixation, microbial community changes, and adjustments in phosphorus cycling functional potential.