Ferrofluid is a novel kind of functional materials, which possesses both the magnetism of solid magnetic material and fluidity of liquid material. Due to its unique optical properties, especially the refractive index tunability under magnetic field, ferrofluid has been widely utilized for magnetic field and current sensing combined with various optical fiber structures. Hence, in this paper, the refractive index tunability of ferrofluid, which is mainly applied into the optical fiber sensors, is first reviewed and illustrated in detail. Then we mainly introduce our work on the applications of ferrofluid in optical fiber sensors based on the refractive index tunability of ferrofluid, including the whole physical configurations, the operating principles, and the performances of these optical fiber sensors. At last, the deficiencies of ferrofluid in the applications of optical fiber sensors as well as valuable potential prospects in further research are analyzed and presented. From all the above reviews and discussions, it can be foreseen that the characteristics of ferrofluid will be improved and the applications of ferrofluid-based optical fiber sensors will be developed rapidly and maturely.
Quantum key distribution (QKD) is a crucial technology for information security in the future. Developing simple and efficient ways to establish QKD among multiple users is important to extend the applications of QKD in communication networks. Herein, we proposed a scheme of symmetric dispersive optics QKD and demonstrated an entanglement-based quantum network based on it. In the experiment, a broadband entangled photon pair source was shared by end users via wavelength and space division multiplexing. The wide spectrum of generated entangled photon pairs was divided into 16 combinations of frequency-conjugate channels. Photon pairs in each channel combination supported a fully connected subnet with eight users by a passive beam splitter. Eventually, it showed that an entanglement-based QKD network over 100 users could be supported by one entangled photon pair source in this architecture. It has great potential on applications of local quantum networks with large user number.
15 April 2016 in IEEE Photonics Technology Letters
An all-fiber high-sensitivity modal interferometer formed by a bent standard single-mode fiber (SMF) has been presented and demonstrated, which can be used to measure refractive indexes (RIs) of solutions and temperature. The interferometer has a simple and compact structure built with a bent bare SMF mimicking a balloon shape. Because of the curvature of bent fiber sensor, modal interference effect would occur when light propagates from the fiber core into the cladding. The measurement is achieved by monitoring the spectral shift of the modal interference. The performances of the interferometers with different bending diameters and sensitive lengths are experimentally investigated concluding the optimal bending radius as 4 mm and sensitive length 16 mm. In the RI range of 1.3493-1.3822, the corresponding sensitivity and detection limit are 225.95 nm/RIU (refractive index unit) and 3.2×10 -4 , respectively. The temperature sensitivity and detection limit of 0.418 nm/°C and 0.173 °C are achieved, respectively.
7 January 2015 in IEEE Transactions on Instrumentation and Measurement
A novel long-tail optical fiber current sensor based on fiber loop ring-down spectroscopy (FLRDS) and magnetic-tunable refractive index properties and magnetictunable transmission properties of magnetic fluid is proposed and demonstrated for the first time. In the sensing system, a Fabry-Perot (F-P) cavity filled with magnetic fluid is used as the sensing head, and the sensitivity of current-sensing has been enhanced significantly. Relations between magnetic field and refractive index of magnetic fluid are measured. Refractive index of magnetic fluid increases linearly as the magnetic field increases and according to the F-P interferometer principle, the best gap length of F-P cavity is obtained. In this paper, the FLRDS sensing system has been theoretically modeled, and a new mathematical model developed for optimizing the coupling ratio of couplers has been presented, and the best coupling ratio has been obtained. The new mathematical model could also be used in the similar ring-down systems. Finally, the performances of the current-sensing system are tested by applying different measured currents. The final results indicate that a sensitivity of 14.88 mA/μs is achieved.
An energy-time entanglement-based dispersive optics quantum key distribution (DO-QKD) is demonstrated experimentally over optical fibers of 20 km. In the experiment, the telecom band energy-time entangled photon pairs are generated through spontaneous four-wave mixing in a silicon waveguide. The arrival time of photons is registered for key generation and security test. High-dimensional encoding in the arrival time of photons is used to increase the information per coincidence of photon pairs. The bin sifting process is optimized by a three-level structure, which significantly reduces the raw quantum bit error rate (QBER) due to timing jitters of detectors and electronics. A raw key generation rate of 151 kbps with a QBER of 4.95% is achieved, in a time bin encoding format with 4 bits per coincidence. This experiment shows that the entanglement-based DO-QKD can be implemented in an efficient and convenient way, which has great potential for quantum secure communication networks in the future.