Isothermal compression tests of in-situ TiB2/7050Al composites fabricated by powder metallurgy were performed at 300–460 °C with the strain rate varying from 0.001 s−1 to 1 s−1. The Arrhenius constitutive equation and hot processing map of composites were established, presenting excellent hot workability with low activation energies and broad processing windows. Dramatic discontinuous/continuous dynamic recrystallization (DDRX/CDRX) and grain boundary sliding (GBS) take place in composites during deformation, depending on the Zener-Hollomon parameter (Z) values. It is found that initially uniform TiB2 particles and fine grain structures are beneficial to the DDRX, which is the major softening mechanism in composites at high Z values. With the Z value decreasing, dynamic recovery and CDRX around particles are enhanced, preventing the occurrence of DDRX. In addition, fine grain structures in composites are stable at elevated temperature thanks to the pinning of dense nanoparticles, which triggers the occurrence of GBS and ensures good workability at low Z values.
The microstructure evolution, tensile properties and work-hardening behavior of AA2219 alloy reinforced by in situ nanosized TiB2 particles were studied in this paper. The observation indicated an impeded recrystallization of the matrix alloy by nanosized TiB2 particles, and the hybrids of nanosized TiB2 particles and Al2Cu phases located at the grain boundary hindered the grain growth. Meanwhile, a large amount fiber textures of //RD (Rolling direction), //RD, //RD //ND (Normal direction), //ND and //ND were detected in nanosized TiB2/AA2219 composite. Tensile test results exhibited a combination of good strength and ductility of the present composite whose yield strength and tensile strength were 11.4% and 5.8% higher than those of the alloy, while its fracture strain increased slightly. Meanwhile, the correlation between this modified microstructure of nanosized TiB2 particles and comprehensive mechanical properties was established. This study provides a new insight into the fabrication and strengthening behaviors of Al matrix composites reinforced by in situ nanoparticles.