Geopolymer concrete is produced from the geopolymerization process, in which molecules known as oligomers integrate to form geopolymer networks with covalent bonding. Its production expends less thermal energy and results in a smaller carbon footprint compared to Ordinary Portland Cement (OPC) concrete. It requires only an alkaline activator to catalyze its aluminosilicate sources such as metakaolin and fly ash, to yield geopolymer binder for the geopolymerization to take place. Because of its eco-friendly technology and practical application, current research interest is mainly concentrated on the endurance of geopolymer concrete to resist heat and chemical aggressions. As such, it is pertinent for this review article to provide critical insight into the recent progress in research on the durability of geopolymer concrete. One significant outcome of the review is that the admixture of geopolymer concrete could be blended with additives such as micro-silica and fibers such as polypropylene fibers, to enhance its durability. The review on the durability aspects of geopolymer concrete showed that it had high compressive strength at an optimal elevated temperature, low to medium chloride ion penetrability, and high resistance to acid attack and abrasion. This makes geopolymer concrete a viable candidate to replace OPC concrete in the construction industry.

This study examines the sources of energy related carbon dioxide (CO₂) emissions, the hazards of climate change and greenhouse gas (GHG) emissions, the global solar energy potential, renewable energy sustainability indicators, impediments, and the environmental implications of fossil fuels. The purpose of this study is to investigate viewpoints on solar energy technologies for sustainable development, with a particular emphasis on photovoltaic (PV), as well as the literature on solar energy technology performance, in order to ascertain worldwide solar energy adoption trends. The discussions address the solar industry’s fundamental ideas, the global energy scenario, the highlights of research conducted to improve the solar industry, prospective applications and future challenges for a more efficient solar industry that may help alleviate the energy crisis. A review of the framework and development of Renewable Energy Sources (RES) and Renewable Energy Laws (REL) on a global scale was conducted.

Concrete as a building material is susceptible to degradation by environmental threats such as thermal diffusion, acid and sulphate infiltration, and chloride penetration. Hence, the inclusion of nanomaterials in concrete has a positive effect in terms of promoting its mechanical strength and durability performance, as well as resulting in energy savings due to reduced cement consumption in concrete production. This review article discussed the novel advances in research regarding C-S-H gel promotion and concrete durability improvement using nanomaterials. Basically, this review deals with topics relevant to the influence of nanomaterials on concrete’s resistance to heat, acid, sulphate, chlorides, and wear deterioration, as well as the impact on concrete microstructure and chemical bonding. The significance of this review is a critical discussion on the cementation mechanism of nanoparticles in enhancing durability properties owing to their nanofiller effect, pozzolanic reactivity, and nucleation effect. The utilization of nanoparticles enhanced the hydrolysis of cement, leading to a rise in the production of C-S-H gel. Consequently, this improvement in concrete microstructure led to a reduction in the number of capillary pores and pore connectivity, thereby improving the concrete’s water resistance. Microstructural and chemical evidence obtained using SEM and XRD indicated that nanomaterials facilitated the formation of cement gel either by reacting pozzolanically with portlandite to generate more C-S-H gel or by functioning as nucleation sites. Due to an increased rate of C-S-H gel formation, concrete enhanced with nanoparticles exhibited greater durability against heat damage, external attack by acids and sulphates, chloride diffusion, and surface abrasion. The durability improvement following nanomaterial incorporation into concrete can be summarised as enhanced residual mechanical strength, reduced concrete mass loss, reduced diffusion coefficients for thermal and chloride, improved performance against sulphates and acid attack, and increased surface resistance to abrasion.