The rapid and precise element measurement of trace species, such as mercury, iodine, strontium, cesium, etc. is imperative for various applications, especially for industrial needs. The elements mercury and iodine were measured by two detection methods for comparison of the corresponding detection features. A laser beam was focused to induce plasma. Emission and ion signals were detected using laser-induced breakdown spectroscopy (LIBS) and laser breakdown time-of-flight mass spectrometry (LB-TOFMS). Multi-photon ionization and electron impact ionization in the plasma generation process can be controlled by the pressure and pulse width. The effect of electron impact ionization on continuum emission, coexisting molecular and atomic emissions became weakened in low pressure condition. When the pressure was less than 1 Pa, the plasma was induced by laser dissociation and multi-photon ionization in LB-TOFMS. According to the experimental results, the detection limits of mercury and iodine in N2 were 3.5 ppb and 60 ppb using low pressure LIBS. The mercury and iodine detection limits using LB-TOFMS were 1.2 ppb and 9.0 ppb, which were enhanced due to different detection features. The detection systems of LIBS and LB-TOFMS can be selected depending on the condition of each application.
20 September 2013 in International Journal of Heat and Mass Transfer
Heat generation mechanism in processes of ultrasonic welding of plastics was not fully solved. Experiment results showed that increasing the amplitude increased the energy dissipated with the exception of low amplitudes, but no detailed analysis can be found in explaining this problem. This study proposed to investigate the heat-generating processes in such a condition with a new physically based model by solving the N-S equations. The increasing mean temperature profiles and the final temperature patterns are well agreed with previous researches. The results predicted that the distribution of heat generated in the welding zone was non-uniform. The highest temperature area changed its position with the variation of time and the amplitude of vibration. In low amplitude conditions, energy dissipation was found to firstly increase with a slight fluctuation, then decreased when the driven amplitude was larger than 5 μm. And different temperature distribution patterns were observed at these turning points.