In order to promote energy mutual aid among microgrids, expand the types of energy interaction, and improve the utilization of renewable energy, a two-layer sharing strategy for multi-microgrids (MMGs) based on the Nash game is proposed. Firstly, the low-carbon transformation of the micro-grid model is carried out, and the source side is transformed into a comprehensive and flexible operation mode for carbon capture thermal power plants. Then, the multi-microgrid subject electro-thermal double-layer sharing model based on the Nash game is constructed, which is decomposed into a revenue maximization sub-problem and a revenue redistribution sub-problem. In the sub-problem of revenue maximization, considering the lowest operation cost of carbon allowances and stepped carbon trading as the goal, the alternating direction multiplier method is used for a distributed solution. In the revenue redistribution sub-problem, the reasonable redistribution of income is realized by constructing the asymmetric energy mapping contribution function for different periods and energy types. Finally, the simulation results have verified the effectiveness of the proposed method. The results showed that the strategy of this paper can achieve the optimization of the economic objectives of the multi-microgrid (MMG) alliance and has the advantages of reasonable redistribution of benefits, promotion of wind and solar consumption, and reduction of carbon emissions.
Real-time target detection has important applications in industry. Identifying the type of power equipment in massive infrared image data for heat fault diagnosis has emerged as a crucial issue that needs to be addressed in this field. However, infrared imaging technology has shortcomings such as poor signal clarity and serious background noise interference. To address this problem, this paper proposes an infrared image classification and detection algorithm for power equipment based on the improved YOLOv10, named YOLOv10plus. Firstly, a lightweight convolution technique (GSConv) is implemented within the central network system to maximize the retention of target features. Secondly, a Slim Neck design structure is used in the neck network and combined with a dual convolution module (DualConv) to achieve a lightweight model. Finally, a Multi Cavity Channel Refiner (MDCR) module is implemented at the foundational level of the network to enhance the target feature recognition. To better handle the imbalance in sample distribution, the original Binary Cross-Entropy (BCE) loss function is modified to incorporate Focal Loss, aiming to enhance model performance by focusing more on hard-to-classify examples. The experimental findings indicate that the enhanced model achieves a substantial improvement in detection performance on power equipment infrared image data. Its FPS value reaches 588 and mAP value reaches 85.3%, which are 361 and 13.3% higher than the original model, respectively.
In electrical exploration techniques, an effective suppression method for Gaussian and impulsive random noise in spread-spectrum induced-polarization (SSIP) data continues to be challenging for conventional denoising methods. Remnant noise influences the complex resistivity spectrum and damages the subsequent interpretation of geophysical surveys. We have developed a hybrid method based on a correlation function and complex resistivity, which introduces the correlation analyses among the transmitting source, the measured potential, and the injected current signal. According to the analyses, reliable results for complex resistivity spectra can be calculated, which can be further used for noise suppression. We apply the hybrid method to numerical and field experiments to process the measured SSIP data. Simulation tests find that the hybrid method not only suppresses the two types of noise but also improves the relative error of the complex resistivity spectrum. Field data processing indicates that the hybrid method can minimize the standard deviation of the data and can have a greater ability to distinguish adjacent objects, which can improve the reliability of the data in subsequent processing and interpretation.
In spread spectrum induced polarization (SSIP) data processing, attenuation of background noise from the observed data is the essential step that improves the signal-to-noise ratio (SNR) of SSIP data. The time-domain spectral induced polarization based on pseudorandom sequence (TSIP) algorithm has been proposed to improve the SNR of these data. However, signal processing in background noise is still a challenging problem. We propose an enhanced correlation identification (ECI) algorithm to attenuate the background noise. In this algorithm, the cross-correlation matching method is helpful for the extraction of useful components of the raw SSIP data and suppression of background noise. Then the frequency-domain IP (FDIP) method is used for extracting the frequency response of the observation system. Experiments on both synthetic and real SSIP data show that the ECI algorithm will not only suppress the background noise but also better preserve the valid information of the raw SSIP data to display the actual location and shape of adjacent high-resistivity anomalies, which can improve subsequent steps in SSIP data processing and imaging.
The evaluation index system is one of the key factors to determine whether the multi-dimensional benefit evaluation of the integrated landscape storage operation system is accurate. In view of the redundancy of the multi-dimensional benefit comprehensive evaluation indicators of the integrated landscape storage operation system, a method combining cluster analysis and AHP (hierarchical analysis) is proposed to reduce the dimension of the indicators and initially screen out the indicators that have an important impact on the evaluation objectives. Eliminate low-impact indicators. KMO coefficient is used to judge the degree of overlap between the remaining indicators. Then the coefficient is used to 𝐾𝑀𝑎 𝑖 delete the overlapping index. uurthermore, the information overlap between the indicators is reduced and the accuracy of the comprehensive evaluation of the system benefit is improved.
The purpose of this study is to establish a comprehensive and reasonable evaluation system, and to provide a scientific and effective weighting method for the indicators in the evaluation system. To sum up, this paper selects 9 low-carbon factors among 64 influencing factors, including energy efficiency, economy, society, low carbon and enterprise development, as evaluation indicators, and builds corresponding evaluation index system. At the same time, intuitionistic fuzzy analytic hierarchy process (AHP) is used for subjective empowerment to effectively improve the fuzziness and repeatability of evaluation empowerment. Entropy weight method gives weight objectively, so that the correlation and difference between indicators are taken into account. In addition, based on the basic idea of improving the combinatorial weights of game theory, we find the consistency or compromise between different index weights to obtain a more scientific comprehensive optimal weight distribution coefficient, which solves the limitations of traditional combinatorial weights to a certain extent.