To effectively reduce vibration, a metamaterial beam with carbon fiber-reinforced polymer (CFRP) is proposed. The dispersion curves are calculated by the transfer matrix method (TM). The frequency response is investigated by the spectral element method (SEM). Displacement fields at different representative frequencies are displayed by the finite element method (FEM). The effects of the geometry, material parameters, and cross-ply angle of CFRP on the band gap are considered numerically, three types of beams are discussed and compared. From the results, it was found that the cross-ply angle and length of CFRP have significant influence on the band gaps. The frequency and width of the band gaps are different when the CFRP layers are imparity. Finally, a CFRP beam with ten periods was fabricated and the experiment was carried out to test transmission characteristics. Although the number of periods is only ten, it was found that the experimental results agree well with the numerical results in the low-frequency range. The results obtained in the paper can provide some useful reference for understanding and optimization of the design for metamaterial beam with wide band gaps, lightweight and high strength.
In the paper, a phononic crystal plate composed of a magnetorheological elastomer with adjustable band gaps in the low frequency range is constructed. The dispersion relations of Lamb waves are studied by the supercell plane wave expansion method. The transmission responses as well as the displacement fields of Lamb waves are calculated by the finite element method. The influence of geometric parameters on the band gaps, the regulation effect of the volume ratio of Fe particles and the bias magnetic field on the band gaps are analyzed. Based on the numerical results, we find that the volume ratio of Fe particles and the magnetic field affect the band gap effectively. The location and width of the band gaps can be adjusted within a broad frequency range by varying the geometric parameters and magnetic field. We can control the band gap, achieve an appropriate and wide low band gap by selecting proper geometric parameters and applying an external contactless magnetic field to deal with complicated and changeable engineering environment. The results are useful for understanding and optimizing the design of composite vibration isolation plates.
22 June 2021 in Mechanics of Advanced Materials and Structures
The purpose of this study is to investigate SH wave in the periodic cement-based piezoelectric layered barrier to meet the needs of vibration control in complex engineering environments and improve the application of periodic vibration isolation barrier in civil engineering. The governing equation of SH wave in periodic barrier is established based on the periodic theory of phononic crystals. The band structures are calculated by plane wave expansion method, the transmission characteristics are computed by transfer matrix method, and the attenuation effect of the periodic barrier is verified by finite element method. The effects of geometric parameters, material parameters and initial stress on band structures are analyzed in details. The numerical results show that the number of unit cells, initial stress and material parameters of the periodic barrier have significant effects on the band gap. As the lattice constant of the structure increases and the equivalent elastic modulus decreases, the lower boundary and the width of the band gap decrease. With the increase of tensile stresses, whether the lower and upper boundary or the width of the band gap will all increase, while they are decrease with the increase of compressive stresses. This work provides an alternative avenue for the design of periodic layers as wave barriers.
Low-frequency flexural vibration plays a significant role in beam vibration control. To efficiently attenuate the propagation of flexural vibration at a low-frequency range, this paper proposes a new type of a phononic crystals beam with an adjustable band gap. The governing equations of flexural vibration in a periodic beam are established based on the Euler theory and Timoshenko theory. The band structures are calculated by the plane wave expansion method, the attenuation properties and transmission response curves with a finite periodic beam are calculated by the spectral element method and finite element method. The effects of the elastic foundation and axial stress on band gaps are discussed in detail, and the regulation of the temperature field on the band gap is emphatically studied. The theoretical and numerical results show that the elastic foundation and axial stress have significant influence on the band gap, and the location and width of the band gaps can be adjusted effectively when the Young’s modulus of PBT is changed by a varying temperature. The results are very useful for understanding and optimizing the design for composite vibration isolation beams.
The wave propagation in elastic solids covered by a thin layer has received significant attention due to the existence of Sezawa waves in many applications such as medical imaging. With a Helmholtz decomposition in cylindrical coordinates and subsequent solutions with Bessel functions, it is found that the velocity of such Sezawa waves is the same as the one in Cartesian coordinates, but the displacement will be decaying along the radius with eventual conversion to plane waves. The decaying with radius exhibits a strong contrast to the uniform displacement in the Cartesian formulation, and the asymptotic approximation is accurate in the range about one wavelength away from the origin. The displacement components in the vicinity of origin are naturally given in Bessel functions which can be singular, making it more suitable to analyze waves excited by a point source with solutions from cylindrical coordinates. This is particularly important in extracting vital wave properties and reconstructing the waveform in the vicinity of source of excitation with measurement data from the outer region.
7 March 2025 in International Journal of Structural Stability and Dynamics