Heavy metal ions (HMIs) pose a serious threat to the environment and human body because they are toxic and non-biodegradable and widely exist in environmental ecosystems. It is necessary to develop a rapid, sensitive and convenient method for HMIs detection to provide a strong guarantee for ecology and human health. Ion-imprinted electrochemical sensors (IIECSs) based on nanomaterials have been regarded as an excellent technology because of the good selectivity, the advantages of fast detection speed, low cost, and portability. Electrode surfaces modified with nanomaterials can obtain excellent nano-effects, such as size effect, macroscopic quantum tunneling effect and surface effect, which greatly improve its surface area and conductivity, so as to improve the detection sensitivity and reduce the detection limit of the sensor. Hence, the present review focused on the fundamentals and the synthetic strategies of ion-imprinted polymers (IIPs) and IIECSs for HMIs detection, as well as the applications of various nanomaterials as modifiers and sensitizers in the construction of HMIIECSs and the influence on the sensing performance of the fabricated sensors. Finally, the potential challenges and outlook on the future development of the HMIIECSs technology were also highlighted. By means of the points presented in this review, we hope to provide some help in further developing the preparation methods of high-performance HMIIECSs and expanding their potential applications.

It is of great significance to develop a simple and rapid electrochemical sensor for simultaneous determination of heavy metal ions (HMIs) in Baijiu by using new nanomaterials. Here, graphene (GR) was utilized to combine with covalent organic frameworks (COFs) that was synthesized via the aldehyde-amine condensation between 2, 5-dimethoxyterephthalaldehyde (DMTP) and 1, 3, 5-tris(4-aminophenyl) benzene (TAPB) to prepare a new GR/COF_DPTB/GCE sensor for electrochemical sensing multiple HMIs. Compared with the glass carbon electrode (GCE), GR/GCE and COF_DPTB/GCE, the developed sensor exhibited excellent electrochemical analysis ability for the simultaneous detection of Cd²⁺, Pb²⁺, and Cu²⁺ owing to the synergistically increased the specific surface area, the periodic porous network and plenty of effective binding sites, as well as the enhanced conductivity. Under the optimized experimental parameters, the proposed sensor showed good linearity range of 0.1–25 μM for Cd²⁺, and both 0.1–11 μM for Pb²⁺ and Cu²⁺ with the detection limits of Cd²⁺, Pb²⁺, and Cu²⁺ being 0.011 μM, 8.747 nM, and 6.373 nM, respectively. Besides, the designed sensor was successfully applied to the simultaneous detection of the three HMIs in Baijiu samples, suggesting its good practical application performance and a new method for the rapid detection of HMIs being expended.

The effect of metal ions and surfactants on the enzymatic hydrolysis of pretreated wheat straw lignocellulose was investigated. Scanning electron microscopy, infrared spectrum analysis, dynamic light scattering, and fluorescence spectra analysis were used to characterize the influence of Fe3+/ polyoxyethylene (20) sorbitan monooleate (Tween 80). The interaction between Fe3+/Tween 80 and enzyme was further investigated by enzyme kinetics and enzyme activity measurements. The best synergistic effect was obtained when the ratio of Fe3+ and Tween 80 was 0.06. The scanning electron microscopy images showed that the Fe3+/Tween 80 combination was associated with high porosity substrates. The infrared spectrum analysis indicated that the components of the substrates depended on additive types. The highest relative enzymatic activity increase rate was obtained with added Fe3+/ Tween 80. The Vmax and Km values of the group with added Fe3+/Tween 80 were much higher than that of the group without additives. With the addition of Fe3+/ Tween 80, the intensity of the fluorescence emission peak decreased and the peak shifted towards a longer wavelength.

The foam and rheological properties of four extended surfactants C_12–14P_mE₂S (m = 0, 3, 5, and 8) of four different concentrations were investigated in this paper. The foam properties, including, foamability, foam stability, liquid carrying ability, foam drainage and foam morphology were characterized. The rheological measurements were carried out through frequency sweep in the oscillation mode. The foamability and foam stability decreased with increasing numbers of PO groups embedded in those surfactants. At the same concentration, the longer the PO chain of the surfactant molecule, the larger the liquid carrying capacity of the foam. The foaming number decreases as the time increases, and longer PO chains were associated with faster foam number decline. The rheological measurements show that those surfactant solutions are “liquid-like”. With increasing surfactant concentration, the viscous modulus of C_12–14P₈E₂S increases gradually, whereas that of C_12–14E₂S decreases.