Plan view pattern control (PVPC) is a highly effective means to improve the rectangularization of products and increase the yield of plate mills. By optimizing the parameters of PVPC, the effect of PVPC can be further improved. In this paper, a digital model for predicting and controlling crop patterns of plates is proposed based on the radial basis function (RBF) neural network optimized by the dung beetle optimizer (DBO) algorithm. Machine vision technology is used to obtain a digital description of the crop pattern of the rolled plates. An automatic threshold adjustment algorithm is proposed for the image processing of plate pattern photos during the rolling process. The error between the pattern data calculated through machine vision technology and the measured pattern data does not exceed 3 mm. The spread parameters of the RBF are optimized using DBO, and the digital model structure is established. The goodness of fit (R2) and the mean absolute error (MAE) are used as evaluation indicators. The results show that the digital model established based on DBO-RBF has good predictive and control performance, realizing intelligent prediction of the crop pattern of plates and the parameter optimization of PVPC. In practical applications, the crop cutting loss area of irregular deformation at the end of the plate can be reduced by 31%.
The Variable Gauge Rolling (VGR) technology is adopted for plate rolling. Two passes are treated as a group, with reducing the head reduction, increasing the tail reduction, to reduce the peak impact torque of the head, and give full play to the equipment capacity in the stable rolling stage to increase the pass reduction. The prediction models of plate width and length, rolling force and torque in VGR process are established. The using strategy of VGR are determined, and two methods for increasing reduction are put forward. The main body and head and tail sections of the rolled plate are calculated separated. The reduction corresponding to the target rolling torque is calculated by Newton iterative method, and pass schedule distribution of VGR process is shown. The VGR technology is applied for plate rolling process. The practical application shows that the influence of head impact in the plate rolling process can be reduced by using VGR. The torque amplification coefficient decreases linearly with the increase of gauge variation, and rolling passes number can be reduced through reasonable pass schedule distribution. The practical application shows that VGR can reduce the influence of head impact in the plate rolling process.
Plate turning is an essential step in the plate rolling process. The traditional control mode relies on the manual observation of billets and mainly manual operation. Manual plate turning becomes an external disturbance of the automatic control system of plate mills, which reduces the reproducibility and accuracy of the rolling process. The automatic plate turning function is urgently needed to improve the control level of the rolling line. In this paper, based on the improved image processing algorithm, the position and angle information of the billet conversion process are detected in real time, and the real-time processing of detection data in a complex production environment is realized. Based on the change in the billet rotation angle in the actual plate turning process, a mathematical model is constructed to simulate the plate turning process. On this basis, the digital model and optimization algorithm for automatic plate turning based on reinforcement learning are established, and the automatic optimization of plate turning speed and accuracy is completed. The field application of data-driven plate turning systems replaces manual plate turning control. The plate turning angle detection error of the system is ≤2°. The average plate turning time of each billet is greatly shortened compared with manual plate turning mode, and the fastest time can be shortened by more than 1 s, which greatly improves the production efficiency and is of great significance for improving the automatic control level and digital upgrade of plate mills.
In the production process of plate, the main factors affecting the yield of plate are the crop-cutting and edge losses. It is very important to accurately predict the crop pattern of plates and effectively control the plan-view pattern. In this paper, a detection scheme is proposed to obtain the plan-view pattern of the intermediate slab and finished plate by placing detection devices after the roughing mill and finishing mill, respectively. An image processing algorithm is used to obtain a dataset of the plan-view pattern parameters, and a plan-view pattern prediction and control model for plate is established based on the BWO-DNN (beluga whale optimization–deep neural network) algorithm. The BWO algorithm is used to optimize the hyperparameters in the DNN algorithm to complete the establishment of the intelligent model. In terms of model analysis, goodness of fit (R2) and mean absolute error (MAE) are used as evaluation indicators. The results show that the intelligence model established based on BWO-DNN has good predictive and control performance, realizing intelligent prediction of the crop pattern of plates and parameter optimization of plan-view pattern control. The actual production verification on site shows that the irregular areas of the plate head and tail can be reduced by 17.2% and 22.6%, respectively.
In the production process of plate, the main factors affecting the yield of plate are the crop cutting and edge losses It is very important to accurately predict the crop pattern of plates and effectively control the plan view pattern. In this paper, a detection scheme is proposed to obtain plan view pattern of intermediate slab and finished plate by placing the detection devices after roughing mill and finishing mill respectively. The image processing algorithm is used to obtain the dataset of plan view pattern parameters, and the plan view pattern prediction and control model of plate is established based on BWO-DNN algorithm. The BWO algorithm is used to optimize the hyperparameters in DNN algorithm to complete the establishment of the intelligent model. In terms of model analysis, goodness of fit (R2) and mean absolute error (MAE) are used as evaluation indicators. The results show that the intelligence model established based on BWO-DNN has good predictive and control performance, realizing intelligent prediction of the crop pattern of plates and parameters optimization of plan view pattern control. The actual production verification on site shows that the irregular area of plate head and tail can be reduced by 17.2 % and 22.6% respectively.