Byoungdeog Choi

Byoungdeog Choi


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 April 2021 in Scientific Reports
Verified
Journal Article
Open access
PDF file
HKHyojung Kim
Hyojung Kim
JPJongwoo Park
Jongwoo Park
TKTaeyoung Khim
Taeyoung Khim
SBSora Bak
Sora Bak
JSJangkun Song
Jangkun Song
BCByoungdeog Choi
Byoungdeog Choi
In this paper, we investigate the Vth shift of p-type LTPS TFTs fabricated on a polyimide (PI) and glass substrate considering charging phenomena. The Vth of the LTPS TFTs with a PI substrate positively shift after a bias temperature stress test. However, the Vth with a glass substrate rarely changed even with increasing stress. Such a positive Vth shift results from the negative charging of fluorine stemmed from the PI under the gate bias. In fact, the C–V characterization on the metal–insulator-metal capacitor reveals that charging at the SiO2/PI interface depends on the applied gate bias and the PI material, which agrees well with the TCAD simulation and SIMS analyses. As a result, the charging at the SiO2/PI interface contributes to the Vth shift of the LTPS TFTs leading to image sticking.

1 August 2016 in Scientific Reports
Verified
Journal Article
Open access
SHSung Heo
Sung Heo
JCJaeGwan Chung
JaeGwan Chung
HLHyung-Ik Lee
Hyung-Ik Lee
JLJunho Lee
Junho Lee
JPJong-Bong Park
Jong-Bong Park
BCByoungdeog Choi
Byoungdeog Choi
Defect depth profiles of Cu (In1−x,Gax)(Se1−ySy)2(CIGSS) were measured as functions of pulse width and voltage via deep-level transient spectroscopy (DLTS). Four defects were observed, i.e., electron traps of ~0.2 eV at 140 K (E1 trap) and 0.47 eV at 300 K (E2 trap) and hole traps of ~0.1 eV at 100 K (H1 trap) and ~0.4 eV at 250 K (H2 trap). The open circuit voltage (VOC) deteriorated when the trap densities of E2 were increased. The energy band diagrams of CIGSS were also obtained using Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), and DLTS data. These results showed that the valence band was lowered at higher S content. In addition, it was found that the E2 defect influenced the VOCand could be interpreted as an extended defect. Defect depth profile images provided clear insight into the identification of defect state and density as a function of depth around the space charge region.

31 August 2019 in Nanomaterials
Verified
Journal Article
Open access
PDF file
CPChan Young Park
Chan Young Park
BCByoungdeog Choi
Byoungdeog Choi
High refractive index nanoparticle material was applied as a scattering layer on the inner side of a glass substrate of a bottom emission organic light emitting diode (OLED) device to enhance light extraction and to improve angular color shift. TiO2 and YSZ (Yttria Stabilized Zirconia; Y2O3-ZrO2) were examined as the high refractive index nanoparticles. The nanoparticle material was formed as a scattering layer on a glass substrate by a coating method, which is generally used in the commercial display manufacturing process. Additionally, a planarization layer was coated on the scattering layer with the same method. The implemented nanoparticle material and planarization material endured, without deformation, the subsequent thermal annealing process, which was carried out at temperature ranged to 580 °C. We demonstrated a practical and highly efficient OLED device using the conventional display manufacturing process by implementing the YSZ nanoparticle. We obtained a 38% enhanced luminance of the OLED device and a decreased angular color change compared to a conventional OLED device.

8 July 2019 in ECS Journal of Solid State Science and Technology
Verified
Journal Article
Open access
PDF file
KKKihwan Kim
Kihwan Kim
SJSangho Jeon
Sangho Jeon
HLHyunjun Lee
Hyunjun Lee
MSMiseon Seo
Miseon Seo
HCHyunguk Cho
Hyunguk Cho
BCByoungdeog Choi
Byoungdeog Choi
In this paper, the TCAD degradation model of IGZO using spatial distribution (X, Y) of physical parameters is proposed for the first time and is confirmed according to various channel length, active thickness, and bias stress conditions that agree with actual measurements. The asymmetric degradation phenomenon according to the source/drain sweep direction occurs when high VDS stress (> 40 V) is applied to a-IGZO TFT due to the local strong electric field in the drain edge region in the active channel. In the double side gate (DSG) structure, the degree of degradation varies according to VTG, which is influenced by the concentration of electrons induced in the channel. Oxygen vacancy in the presence of 2+ ionized states (VO2+) in IGZO is stable. However, when band bending is severe, the electrons are captured, and the structural transition occurs as a neutral VO in the meta-stable state. This process is assumed to be a mechanism of IGZO degradation at high drain bias stress, and the electric field (>0.5M V/cm) and electron concentration (>1 × 1010 cm−3) in the channel are considered as the main factors of degradation and are modeled using the mapping function provided by Silvaco.

26 June 2018 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
YCYoungseung Cho
Youngseung Cho
HKHuijung Kim
Huijung Kim
KJKyungho Jung
Kyungho Jung
BKBongsoo Kim
Bongsoo Kim
YHYoosang Hwang
Yoosang Hwang
BCByoungdeog Choi
Byoungdeog Choi
Recently, new dynamic random-access memory (DRAM) structures have been used to sharply reduce chip size. One of these is vertical-cell DRAM that has the advantage of reducing the chip area by 33% compared with the conventional cell DRAM. However, since the bitline is made in Si trenches, it can cause a floating-body effect, which increases the OFF current. Here, we suggest the buried body engineering method as a simple way to deal with these disadvantages without changing the materials. This method significantly improved the electrical performance in comparison with the conventional buried contact. Especially, the OFF current, which is the most important factor influencing the refresh time, was dramatically reduced by a factor of 63. The reason for this dramatic decrease in the OFF current is that the holes accumulated in the body are removed immediately, and they do not generate a parasitic bipolar junction transistor (BJT) action. We also calculated the hole density using simulations and obtained the junction depth that suppresses the floating-body effect. Above all, we provide advanced insight into the mechanism of the parasitic BJT action due to the floating-body effect that occurs at the bottom contact region of vertical-cell DRAM.

31 March 2021 in Electronic Materials Letters
Verified
Journal Article
Closed access
PDF file
JPJungmin Park
Jungmin Park
HKHyojung Kim
Hyojung Kim
PCPyungho Choi
Pyungho Choi
BJBohyeon Jeon
Bohyeon Jeon
JLJongyoon Lee
Jongyoon Lee
BCByoungdeog Choi
Byoungdeog Choi