Potassium-doped organometal halide perovskite solar cells (PSCs) of more than 20% power conversion efficiency (PCE) without I-V hysteresis were constructed. The crystal lattice of the organometal halide perovskite was expanded with increasing of the potassium ratio, where both absorption and photoluminescence spectra shifted to the longer wavelength, suggesting that the optical band gap decreased. In the case of the perovskite with the 5% K+, the conduction band minimum (CBM) became similar to the CBM level of the TiO2-Li. In this situation, the electron transfer barrier at the interface between TiO2-Li and the perovskite was minimised. In fact, the transient current rise at the maximum power voltages of PSCs with 5% K+ was faster than that without K+. It is concluded that stagnation-less carrier transportation could minimise the I-V hysteresis of PSCs.
The extension of the light absorption of photovoltaics into the near-infrared region is important to increase the energy conversion efficiency. Although the progress of the lead halide perovskite solar cells is remarkable, and high conversion efficiency of >20% has been reached, their absorption limit on the long-wavelength side is ∼800 nm. To further enhance the conversion efficiency of perovskite-based photovoltaics, a hybridized system with near-infrared photovoltaics is a useful approach. Here we report a panchromatic sensitizer, coded DX3, that exhibits a broad response into the near-infrared, up to ∼1100 nm, and a photocurrent density exceeding 30 mA cm−2 in simulated air mass 1.5 standard solar radiation. Using the DX3-based dye-sensitized solar cell in conjunction with a perovskite cell that harvests visible light, the hybridized mesoscopic photovoltaics achieved a conversion efficiency of 21.5% using a system of spectral splitting.
5 February 2015 in The Journal of Physical Chemistry C
Three-dimensional organic–inorganic lead iodide perovskites are potential photoconductive materials for solar cells. Nowadays, a high power conversion efficiency exceeding 20% can be achieved. However, perovskite solar cells are reported to suffer from a large hysteresis in the current–voltage curves. This may be attributed to the motion of organic cations with a permanent dipole moment in response to the applied electric field. Therefore, in order to suppress the hysteresis, organic cations that have a zero dipole moment and a molecular size well fitted to the lead iodide cavity are required. Using density functional theory calculations, we theoretically studied the thermodynamic stability and electronic properties of lead iodide perovskites with large guanidinium cations having a nearly zero dipole moment and compared the results with those predicted via the Goldschmidt tolerance factor. The properties of formamidinium–guanidinium (FA1–xGAxPbI3) intermediate alloys were also investigated.