An experimental study on rotating detonation is presented in this paper. The study was focused on the possibility of using rotating detonation in a rocket engine. The research was divided into two parts: the first part was devoted to obtaining the initiation of rotating detonation in fuel–oxygen mixture; the second was aimed at determination of the range of propagation stability as a function of chamber pressure, composition, and geometry. Additionally, thrust and specific impulse were determined in the latter stage. In the paper, only rich mixture is described, because using such a composition in rocket combustion chambers maximizes the specific impulse and thrust. In the experiments, two kinds of geometry were examined: cylindrical and cylindrical-conic, the latter can be simulated by a simple aerospike nozzle. Methane, ethane, and propane were used as fuel. The pressure–time courses in the manifolds and in the chamber are presented. The thrust–time profile and detonation velocity calculated from measured pressure peaks are shown. To confirm the performance of a rocket engine with rotating detonation as a high energy gas generator, a model of a simple engine was designed, built, and tested. In the tests, the model of the engine was connected to the dump tank. This solution enables different environmental conditions from a range of flight from 16 km altitude to sea level to be simulated. The obtained specific impulse for pressure in the chamber of max. 1.2 bar and a small nozzle expansion ratio of about 3.5 was close to 1,500 m/s.

Hydrogen is the most common molecule in the universe. It is an excellent fuel for thermal engines: piston, turbojet, rocket, and, going forward, in thermonuclear power plants. Hydrogen is currently used across a range of industrial applications including propulsion systems, e.g., cars and rockets. One obstacle to expanding hydrogen use, especially in the transportation sector, is its low density. This paper explores hydrogen as an addition to liquid fuel in the detonation chamber to generate thermal energy for potential use in transportation and generation of electrical energy. Experiments with liquid kerosene, hexane, and ethanol with the addition of gaseous hydrogen were conducted in a modern rotating detonation chamber. Detonation combustion delivers greater thermal efficiency and reduced NOx emission. Since detonation propagates about three orders of magnitude faster than deflagration, the injection, evaporation, and mixing with air must be almost instantaneous. Hydrogen addition helps initiate the detonation process and sustain continuous work of the chamber. The presented work proves that the addition of gaseous hydrogen to a liquid fuel–air mixture is well suited to the rotating detonation process, making combustion more effective and environmentally friendly.