The paper shows the results of a study on the effect of starch binder on the mechanical, physical and burning properties of charcoal briquettes. Two types of binders were repeatedly used to make briquettes of native wheat starch and modified wheat starch, at 8% of the whole. Briquetting was performed in a roller press unit, and pillow-shaped briquettes were made. The moisture of the mixed material ranged from 28 to 32%. The product, whether the former or the latter, was characterized by very good mechanical properties and satisfactory physical properties. Moreover, the type of starch binder had no effect on toughness, calorific heating value, volatiles, fixed carbon content and ash content. However, the combustion test showed quite different burning properties. As briquettes should have short firing up time and lower smokiness, as well as high maximum temperature and long burning time, we have concluded that briquettes with native wheat starch as a binder are more appropriate for burning in the grill.
1 October 2023 in Journal of Ecological Engineering
The worldwide transition to a future with net-zero emissions depends heavily on solar energy. However, when land prices rise, and population density rises, the need for large land expanses to develop solar farms poses difficulties. Floating Photovoltaics (FPV) has come to light as a viable remedy...
1 January 2015 in Journal of Ecological Engineering
This article presents the results of a pilot plant study on fine coal processing to produce alternative fuel. Fine-grained waste generated in the processing plant of a coal-processing plant in eastern Poland (Lublin Coal Basin) was used to obtain briquettes using the roll press briquetting method. The study included material homogenization, the selection of suitable parameters for the roll press unit, and an analysis of briquette quality. Strength and waterproof testing of briquettes and a study of the heat of combustion as well as ash and dust emissions were performed. Based on the results, the production processes were developed for three types of coal-based fuel briquettes with additional components, such as potato starch, molasses, and wood biomass. Briquettes made with starch met the minimum quality requirements, but use of a cheaper binder (molasses) did not provide good quality briquettes. The addition of biomass in an amount not exceeding 20% by weight did not significantly affect the pollution emissions in the combustion tests. The fuel obtained had a suitably high-energy value (22–24 MJ · kg−1) and may be used as an alternative fuel for combustion in industrial and domestic boilers.
1 February 2025 in Ecological Engineering & Environmental Technology
Floating photovoltaic (FPV) systems have emerged as an innovative and sustainable solution for renewable energy generation, offering advantages such as enhanced efficiency, land conservation, and integration with aquatic environments. This review examines critical factors influencing the...
1 July 2022 in Advances in Science and Technology Research Journal
This review presents the usage of adhesives and binders for agglomeration of particle materials, including waste, in order to obtain strong bodies. The binding materials were classified into three categories: inorganic binders, organic binders, and compound binders. Many examples of the...