Near-eye display (NED) systems for virtual reality (VR) and augmented reality (AR) have been rapidly developing; however, the widespread use of VR/AR devices is hindered by the bulky refractive and diffractive elements in the complicated optical system as well as the visual discomfort caused by excessive binocular parallax and accommodation-convergence conflict. To address these problems, an NED system combining a 5 mm diameter metalens eyepiece and a three-dimensional (3D), computer-generated holography (CGH) based on Fresnel diffraction is proposed in this paper. Metalenses have been extensively studied for their extraordinary capabilities at wavefront shaping at a subwavelength scale, their ultrathin compactness, and their significant advantages over conventional lenses. Thus, the introduction of the metalens eyepiece is likely to reduce the issue of bulkiness in NED systems. Furthermore, CGH has typically been regarded as the optimum solution for 3D displays to overcome limitations of binocular systems, since it can restore the whole light field of the target 3D scene. Experiments are carried out for this design, where a 5 mm diameter metalens eyepiece composed of silicon nitride anisotropic nanofins is fabricated with diffraction efficiency and field of view for a 532 nm incidence of 15.7% and 31°, respectively. Furthermore, a novel partitioned Fresnel diffraction and resample method is applied to simulate the wave propagations needed to produce the hologram, with the metalens capable of transforming the reconstructed 3D image into a virtual image for the NED. Our work combining metalens and CGH may pave the way for portable optical display devices in the future.

To overcome the retrieval problems in complex water, dual working wavelengths are required instead of a single wavelength in oceanic lidar. The wavelength optimization method of detecting chlorophyll a and Colored Dissolved Organic Matter (CDOM) absorption coefficient with a dual-wavelength lidar is studied in this paper. The inversion methods of chlorophyll a and CDOM absorption are developed based on the water absorption characteristics, which then lead to the inversion error equations. The effects of the wavelength on the inversion errors are studied. For the case in which λ₁ and λ₂ are both random, the errors are relatively small when λ₁ is chosen between 420 and 560 nm and λ₂ is selected under 420 nm. For the case in which λ₁ is fixed at 532 nm, the errors generally decrease with decreasing λ₂, with minimums around 300 and 356–360 nm under different water conditions. The wavelength optimization method discussed in this paper and the penetration depth criterion will be beneficial to the design of the dual-wavelength lidar.