With the globalization of the integrated circuit (IC) design flow of chip fabrication, intellectual property (IP) piracy is becoming the main security threat. While most of the protection methods are dedicated for digital circuits, we are trying to protect radio-frequency (RF) designs. For the first time, we applied the split manufacturing method in RF circuit protection. Three different implementation cases are introduced for security and design overhead tradeoffs, i.e., the removal of the top metal layer, the removal of the top two metal layers and the design obfuscation dedicated to RF circuits. We also developed a quantitative security evaluation method to measure the protection level of RF designs under split manufacturing. Finally, a simple Class AB power amplifier and a more sophisticated Class E power amplifier are used for the demonstration through which we prove that: (1) the removal of top metal layer or the top two metal layers can provide high-level protection for RF circuits with a lower request to domestic foundries; (2) the design obfuscation method provides the highest level of circuit protection, though at the cost of design overhead; and (3) split manufacturing may be more suitable for RF designs than for digital circuits, and it can effectively reduce IP piracy in untrusted off-shore foundries.
The outsourcing of integrated circuit (IC) fabrication services to overseas manufacturing foundry has raised security and privacy concerns with regard to intellectual property (IP) protection as well as the integrity maintenance of the fabricated chips. One way to protect ICs from malicious attacks is to encrypt and obfuscate the IP design by incorporating additional key gates, namely logic encryption or logic locking. The state-of-the-art logic encryption techniques certainly incur considerable performance overhead upon the genuine IP design. The focus of this paper is to leverage the unique property of emerging transistor technology on reducing the performance overhead as well as preserving the robustness of logic locking technique. We design the polymorphic logic gate using silicon nanowire field effect transistors (SiNW FETs) to replace the conventional Exclusive-OR (XOR)-based logic cone. We then evaluate the proposed technique based on security metric and performance overhead.
Due to the outsourcing of chip manufacturing, countermeasures against Integrated Circuit (IC) piracy, reverse engineering, IC overbuilding and hardware Trojans (HTs) become a hot research topic. To protect an IC from these attacks, logic encryption techniques have been considered as a low-cost defense mechanism. In this paper, our proposal is to insert the multiplexer (MUX) with two cases: (i) we randomly insert MUXs equal to half of the output bit number (half MUX insertions); and (ii) we insert MUXs equal to the number of output bits (full MUX insertions). Hamming distance is adopted as a security evaluation. We also measure the delay, power and area overheads with the proposed technique.