Sufficient supplies of critical raw materials (CRMs) for rapidly developing technologies, e.g., Li-ion batteries, wind turbines, photovoltaics, digitization, etc., have become one of the main economic challenges for the EU. Due to growing import dependency and associated risk of supply disruptions of these raw materials from third countries, there is a need to encourage their domestic production. This is an important starting point for EU value chains crucial for the sustainable economic growth of the whole Union. This contribution has evaluated the possibilities of CRMs supply from the EU’s primary sources. A three-step approach, including an assessment of CRMs’ importance for the EU’s economic growth, their significance in at least two of the three strategic industrial sectors (i.e., renewable energy, e-mobility, defense and aerospace), and their potential availability from EU mineral deposits, has been applied. Results of the analysis have shown that, of 29 critical mineral raw materials (according to the 2020 EC list), the potential to develop manufacturing from the Union mineral deposits exists for 11 CRMs, i.e., cobalt, graphite (natural), HREE, LREE, lithium, magnesium, niobium, PGMs, silicon metal, titanium, and tungsten, while some other CRMs, namely gallium, germanium, indium, and vanadium can be recovered as by-products. Measures to mitigate EU import dependency have been also proposed.

The production of glass in Poland, especially of container and flat glass, has constantly risen for at least 30 years. New investments in this sector, which have recently been completed or are currently in progress, create optimistic prospects for further development of this industry, whose total annual production capacities in the next few years is expected to exceed 4 million tons. This will result in increasing demand for basic glass-making raw materials, especially high-quality silica sand (glass sand), which can be satisfied almost entirely from domestic sources. Poland as a country with a considerable resource base of these mineral raw materials, has noted a constantly growing production level that currently reaches approximately 2.8 million tons per year. This paper aims to characterize and interpret the development trends in the Polish glass industry in an international context, as well as the resulting increase in demand for glass sand. In this context, an attempt was made to answer questions concerning the sufficiency of the Polish domestic resource base for the production of glass sand. For this study, the leading recent international and Polish analyses, related to glass industry development, the resource base of glass silica sand, and the management of these types of sand, were taken into account, and were complemented by official statistical data and surveying of domestic glass producers. The performed analysis showed that when taking into account the available glass sand resources in developed deposits in Poland, it is possible to continue production at the existing or a slightly increasing level for another 20–25 years. Based on a more comprehensive perspective, however, it would be a good approach to continue providing access to those parts of currently extracted deposits of silica sand and sandstone that are now located outside of the existing exploitation licenses, as well as enabling the development of some satellite deposits in the Tomaszów Basin, which may prove difficult due to environmental factors.

Major benefits and constraints related to mineral extraction within the EU have been identified on the examples of selected critical raw materials’ deposits. Analyzed case studies include the following ore deposits: Myszków Mo-W-Cu (Poland), Juomasuo Au-Co (Finland), S. Pedro das Águias W-Sn (Portugal), Penouta Nb-Ta-Sn (Spain), Norra Kärr REEs (Sweden) and Trælen graphite (Norway). They represent different stages of development, from the early/grassroot exploration stage, through advanced exploration and active mining, up to reopening of abandoned mines, and refer to different problems and constraints related to the possibility of exploitation commencement. The multi-criteria analysis of the cases has included geological and economic factors as well as environmental, land use, social acceptance and infrastructure factors. These factors, in terms of cost and benefit analysis, have been considered at three levels: local, country and EU levels. The analyzed cases indicated the major obstacles that occur in different stages of deposit development and need to be overcome in order to enable a new deposit exploitation commencement. These are environmental (Juomasuo and Myszków), spatial (Juomasuo) as well as social constraints (Norra Kärr, Juomasuo). In the analyzed cases, the most important constraints related to future deposit extraction occur primarily at a local level, while some important benefits are identified mainly at the country and the EU levels. These major benefits are related to securing long-term supplies for the national industries and strategically important EU industry sectors.

This paper presents the results of analyses of structure, volume and trends of demand for selected major critical raw materials (CRMs) suitable for the EU’s photovoltaic industry (PV). In order to achieve the EU’s goals in terms of the reduction of greenhouse gas emission and climate neutrality by 2050, the deployment of energy from renewable sources is of key importance. As a result, a substantial development of wind and solar technologies is expected. It is forecasted that increasing the production of PV panels will cause a significant growth in the demand for raw materials, including CRMs. Among these, silicon metal, gallium, germanium and indium were selected for detailed analyses while boron and phosphorus were excluded owing to small quantities being utilized in the PV sector. The estimated volume of the apparent consumption in the EU does not usually exceed 0.1 million tonnes for high purity silicon metal, a hundred tonnes for gallium and indium and several dozen tonnes for germanium. The major net-importers of analyzed CRMs were Germany, France, Spain, Czech Republic, the Netherlands, Slovakia and Italy. The largest quantities of these metals have been utilized by Germany, France, Belgium, Slovakia and Italy. The PV applications constitute a marginal share in the total volume of analyzed metal total end-uses in the EU (10% for silicon metal, 5% for gallium, 13% for germanium and 9% for indium). As a result, there is a number of applications that compete for the same raw materials, particularly including the production of electronic equipment. The volume of the future demand for individual CRMs in PV sector will be strictly related to trends in the development of PV-panel production with crystalline silicon technology currently strongly dominating the global market.

Aim of the study: The characteristics of the analyzed carbonate rocks in terms of their geological setting, lithological features, and quality parameters are presented.Material and methods: Jurassic limestones from the Działoszyn region were subjected to characterization for lithological features and quality parameters in relation to the geological conditions of their deposits. The study also included the physicochemical characteristics of carbonate-clay flour in terms of the possibility of using it in the fertilizer industry. The samples that have been subject of analyses have been collected from Raciszyn and Raciszyn II deposits that currently have been exploited.Results and conclusions: The deposits are characterized by high content of CaCO3 (on average, approx. 93%). Among other minerals, important in terms of the possibility of being used as fertilizers, there are: MgO (0.55–1.34%), followed by Fe2O3 (approx. 0.4%), and Al2O3 (0.07-2.49%). In contrast, in the waste raw material, i.e. carbonate-clay flour, similarly to the limestones from the Raciszyn deposits, there is (apart from carbonates) also magnesium, potassium and sulfur as well as small amounts of phosphorus and sodium, which is indicative of the possibility of using this material as a deacidifying agent. The content of microelements (Fe, Mn, Zn, Cu, Co, Mo) in carbonate-clay flour indicates that this material constitutes a potential source of these nutrients for plant mineral nutrition. The content of heavy metals and metalloid (Cd, Pb, Hg, Ni, Cr, etc) is very low and lower than the acceptable content in liming agents and mineral fertilizers.

This work is an attempt to determine the scale of threats to the mineral security of Poland in the area of non-energy raw materials resulting from Russia’s invasion of Ukraine. In particular, it aims to identify those industries whose proper functioning may be threatened in the face of the limited supply of raw materials from three directions – Russia, Belarus and Ukraine. An element of the analysis was also the indication of possible alternative sources of the supply of these raw materials. For this purpose, the directions of imports to Poland of about 140 non-energy raw materials in 2011–2020 were analyzed. As a result, about thirty raw materials were selected, the supplies of which came from, among others, at least one of the three mentioned countries. To determine the raw materials for which the disruption of supplies may have the most serious impact on the functioning of the Polish economy, the following criteria were adopted: a minimum 20% share of these countries in covering the domestic demand in 2020, and a minimum value of these imports in 2020 of 20 million PLN. These threshold conditions were met by eight raw materials: iron ores and concentrates, carbon black, potash, aluminum, ferroalloys, nickel, ball clays and refractory clays, and synthetic corundum. Among these, the need to change the directions of supplies applies to the greatest extent to iron ores and concentrates, aluminum and nickel, while in the case of non-metallic raw materials, it applies most to ball clays and refractory clays and potassium salts. These are among the most important raw materials necessary for the proper functioning of the national economy, but their shortage or disruptions in the continuity of their supplies pose a real threat to the mineral security of Poland.