Regulating contact forces with high precision is crucial for grasping and manipulating fragile or deformable objects. We aim to utilize the dexterity of human hands to regulate the contact forces for robotic hands and exploit human sensory-motor synergies in a wearable and non-invasive way. We extracted force information from the electric activities of skeletal muscles during their voluntary contractions through surface electromyography (sEMG). We built a regression model based on a Neural Network to predict the gripping force from the preprocessed sEMG signals and achieved high accuracy (R2 = 0.982). Based on the force command predicted from human muscles, we developed a force-guided control framework, where force control was realized via an admittance controller that tracked the predicted gripping force reference to grasp delicate and deformable objects. We demonstrated the effectiveness of the proposed method on a set of representative fragile and deformable objects from daily life, all of which were successfully grasped without any damage or deformation.

The under-actuated foot rotation that the heel of the stance leg lifts off the ground and the body rotates around the stance toe is an important feature in human walking. However, it is absent in the realized walking gait for the majority of biped robots because of the difficulty and complexity in the control it brings about. In this paper, a hybrid control approach aiming to integrate the main characteristics of human walking into a simulated seven-link biped robot is presented and then verified with simulations. The bipedal robotic gait includes a fully actuated single support phase with the stance heel supporting the body, an under-actuated single support phase, with the stance toe supporting the body, and an instantaneous double support phase when the two legs exchange their roles. The walking controller combines virtual force control and foot placement control, which are applied to the stance leg and the swing leg, respectively. The virtual force control assumes that there is a virtual force which can generate the desired torso motion on the center of mass of the torso link, and then the virtual force is applied through the real torques on each actuated joint of the stance leg to create the same effect that the virtual force would have created. The foot placement control uses a path tracking controller to follow the predefined trajectory of the swing foot when walking forward. The trajectories of the torso and the swing foot are generated based on the cart-cable model. Co-simulations in Adams and MATLAB show that the desired gait is achieved with a biped robot under the action of the proposed method.

This paper presents a complete planner and controller scheme for bipedal robots, designed to enhance robustness against external disturbances. The high-level planner utilizes model predictive control (MPC) to optimize both the foothold location and step duration based on the divergent component of motion (DCM) to increase the robustness of generated gaits. For low-level control, we employ a momentum-based observer capable of estimating external forces acting on both stance and swing legs. The full-body dynamics, incorporating estimated disturbances, are integrated into a weighted whole-body control (WBC) to obtain more accurate ground reaction forces needed by the momentum-based observer. This approach eliminates the dependency on foot-mounted sensors for ground reaction force measurement, distinguishing our method from other disturbance estimation methods that rely on direct sensor measurements. Additionally, the controller incorporates trajectory compensation mechanisms to mitigate the effects of external disturbances. The effectiveness of the proposed framework is validated through comprehensive simulations and experimental evaluations conducted on BRUCE, a miniature bipedal robot developed by Westwood Robotics (Los Angeles, CA, USA). These tests include walking under swing leg disturbances, traversing uneven terrain, and simultaneously resisting upper-body pushes.

This paper presents a complete planner and controller scheme to achieve balance and walking for a biped robot, which does not need to distinguish the robot’s dynamic model parameters. The high-level planner utilizes model predictive control to optimize both the foothold location and step duration based on the Divergent Component of Motion (DCM) model to enhance the robustness of generated gaits. For low-level control, we use quadratic programming (QP) to optimize the contact force distribution under the contact constraints to achieve the virtual wrench exerted on the base of the robot. Then, the joint torques sent to the robot are derived from three parts: first, the torques mapped from the contact force; second, the swing leg tracking; and third, the stance foot stabilization. The simulation and experiment on BRUCE, a miniature bipedal robot from Westwood Robotics (Los Angeles, CA, USA), testify to the performance of the control scheme, including push recovery, Center of Mass (CoM) tracking, and omnidirectional walking.

Stability and energy efficiency are the main focuses in the bipedal robot field. In this paper, we apply a multiphase gait, which is different from the widely used two-phase gait, to improve the stability at the moment, when a biped robot transfers from the double support phase to the single support phase. Then, we create dynamic equations with contact forces in each phase using Lagrangian formulation. Furthermore, the direct collocation method is utilized to generate the optimal trajectory toward both stability and energy efficiency. Finally, the comparison between multiphase gait and two-phase gait is performed with numerical simulations. The results prove that multiphase gait increases the stability margin in the cost of slightly decreasing energy efficiency. Besides, both gaits show a similar human-like characteristic in hip height variation during walking.

This article introduces a novel perspective on designing a stepping controller for bipedal robots. Typically, designing a state-feedback controller to stabilize a bipedal robot to a periodic orbit of step-to-step (S2S) dynamics based on a reduced-order model (ROM) can achieve stable walking. However, the model discrepancies between the ROM and the full-order dynamic system are often ignored. We introduce the latest results from behavioral systems theory by directly constructing a robust stepping controller using input-state data collected during flat-ground walking with a nominal controller in the simulation. The model uncertainty discrepancies are equivalently represented as bounded noise and over-approximated by bounded energy ellipsoids. We conducted extensive walking experiments in a simulation on a 22-degrees-of-freedom small humanoid robot, verifying that it demonstrates superior robustness in handling uncertain loads, various sloped terrains, and push recovery compared to the nominal S2S controller.