This paper provides a comprehensive review of distribution system state estimation in terms of basic definition, different methods, and their application. In the last few years, the operation of distribution networks has been influenced by the installation of distributed generations. In order to control and manage an active distribution network’s performance, distribution system state estimation methods are introduced. A transmission system state estimation cannot be used directly in distribution networks since transmission and distribution networks are different due to topology configuration, the number of buses, line parameters, and the number of measurement instruments. So, the proper state estimation algorithms should be proposed according to the main distribution network features. Accuracy, computational efficiency, and practical implications should be considered in the designing of distribution state estimation techniques since technical issues and wrong decisions could emerge in the control center by inaccurate distribution state estimation results. In this study, conventional techniques are reviewed and compared with data-driven methods in order to highlight the pros and cons of different techniques. Furthermore, the integrated distribution state estimation methods are compared with the distributed approaches, and the different criteria, including the level of area overlapping execution time and computing architecture, are elaborated. Moreover, mathematical problem formulation and different measuring methods are discussed.
In the modern power grid, with the growing penetration of renewable and distributed energy systems, the use of parallel inverters has significantly increased. It is essential to achieve stable parallel operation and reasonable power sharing between these parallel inverters. Droop controllers are commonly used to control the power sharing between parallel inverters in an inverter-based microgrid. In this paper, a small signal model of droop controllers with secondary loop control and an internal model-based voltage and current controller is proposed to improve the stability, resiliency, and power sharing of inverter-based distributed generation systems. The distributed generation system’s nonlinear dynamic equations are derived by incorporating the appropriate and accurate models of the network, load, phase locked loop and filters. The obtained model is then trimmed and linearized around its operating point to find the distributed generation system’s state space representation. Moreover, we optimize the critical control parameters of the model, which are found using eigenvalue analysis, and Grey Wolf optimization technique. Through time-domain simulations, we show that the proposed method improves the system’s resiliency, stability, and power sharing characteristics.