Carrying a laser Doppler instrument, the Aeolus satellite was launched in 2018, becoming the first mission for atmospheric wind profile measurements from space. Before utilizing the Aeolus winds for different applications, evaluating their data quality is essential. With the help of ground-based wind profiling radar measurements and the European Centre for Medium-Range Weather Forecasts (ECMWF) model equivalents, this study quantifies the error characteristics of Aeolus L2B (baseline-11) near-real-time horizontal line-of-sight winds across Australia during October 2020–March 2021 by using both inter-comparison and triple collocation analysis. The results of the inter-comparison analysis indicate that both Rayleigh-clear winds and Mie-cloudy winds are in good agreement with the ground-based radar measurements with overall absolute mean biases smaller than 0.7 m s−1 and correlation coefficients larger than or equal to 0.9. Moreover, assuming the radar measurements as the reference data set, Mie-cloudy winds are shown to be more precise than Rayleigh-clear winds with an overall random error of 4.14 and 5.81 m s−1, respectively. Similar results were also found from triple collocation analysis, with error standard deviations of 5.61 and 3.50 m s−1 for Rayleigh-clear winds and Mie-cloudy winds. In addition, the Mie channel is shown to be more capable of capturing the wind in the planetary boundary layer (< 1500 m). The findings of this study demonstrate the good performance of space-borne Doppler lidar for wind profiling and provide valuable information for data assimilation in numerical weather prediction.
20 January 2021 in Quarterly Journal of the Royal Meteorological Society
Satellite observation footprints may extend over many grid points of a high‐resolution limited‐area model, while small and fast model scales may not be traceable by the observing system. We discuss the spatial representation of scatterometer ocean surface winds for the representation of high‐resolution model state variables. A prototype observation operator called supermodding is studied in the variational assimilation framework in order to avoid correcting unconstrained small scales during the assimilation procedure. The challenges connected to small scales that are represented by the mesoscale model with respect to the application of the supermodding operator are discussed through idealised experiments. These results show that the application of the supermodding operator is able to avoid correcting unconstrained small scales, putting focus on the large scales only during data assimilation. Departure‐based diagnostics show that the footprint representation helps to reduce the standard deviation of observation minus background departures (4–5% reduction) while the statistics for the supermodding method show a further reduction (8–11%). The impact of the supermodding approach is discussed through a forecast sensitivity study using a moist total energy norm (MTEN)‐based technique and verification of the forecasts against observations. It is shown that the impact of the supermodding method to ASCAT data assimilation on the upper‐air AROME‐Arctic forecasts is observed over sea and near the surface, and that it is progressively shifted towards 700–800 hPa levels. Both supermodding at 30 km and at 60 km (i.e., twice the effective resolution of the applied scatterometer observations) show significant and consistent improvement on forecasts of lower tropospheric wind and temperature compared to the operational assimilation technique, as such demonstrating the robustness of the supermodding technique.
11 January 2022 in Quarterly Journal of the Royal Meteorological Society
Aeolus is the first Doppler wind lidar (DWL) to measure wind profiles from space. Aeolus is an ESA (European Space Agency) explorer mission with the objective to retrieve winds from the collected atmospheric return signal which is the result of Mie and Rayleigh scattering of laser‐emitted light by atmospheric molecules and particulates. The focus of this paper is on winds retrieved from instrument Mie channel collected data, that is, originating from Mie scattering by atmospheric aerosols and clouds. The use of simulated data from numerical weather prediction (NWP) models is a widely accepted and proven concept for the monitoring of the performance of many meteorological instruments, including Aeolus. Continuous monitoring of Aeolus Mie channel winds against model winds from the European Centre for Medium‐Range Weather Forecasts (ECMWF) has revealed systematic errors in retrieved Mie winds. Following a reverse engineering approach, the systematic errors could be traced back to imperfections of the data in the calibration tables which serve as input for the on‐ground wind processing algorithms. A new algorithm, denoted NWP calibration, makes use of NWP model winds to generate an updated calibration table. It is shown that Mie winds retrieved by making use of the NWP‐based calibration tables show reduced systematic errors, not only when compared to NWP model winds but also when compared to an independent dataset of very‐high‐resolution aircraft wind data. The latter gives high confidence that the NWP‐based calibration algorithm does not introduce model‐related errors into retrieved Aeolus Mie winds. Based on the presented results in this paper, the NWP‐based calibration table, as part of the level‐2B wind processing, has become part of the operational processing chain since 01 July 2021.
The wind profiles measured by the Aeolus satellite mission are unique and valuable wind products for numerical weather prediction. However, just like any other remote sensing measurements, it has a footprint extending over a number of model grid cells, especially in high‐resolution mesoscale models. The spatial representation of Aeolus Rayleigh‐clear observations has been assessed in a mesoscale limited‐area model called AROME‐Arctic by using a footprint observation operator. The footprint representation provides small, but consistent reduction in the standard deviation of background departures and an observing system experiment comparing the default and the footprint operator based on Aeolus data assimilation showed a small positive impact on AROME‐Arctic forecasts.
Denial experiments, also denoted observing system experiments (OSEs), are used to determine the impact of an observing system on the forecast quality of a numerical weather prediction (NWP) model. When the impact is neutral or positive, new observations from this observing system may be admitted to an operational forecasting system based on that NWP model. A drawback of the method applied in most denial experiments is that it neglects the operational time constraint on the delivery of observations. In a 10-week twin experiment with the operational High-Resolution Limited-Area Model (HIRLAM) at KNMI, the impact of additional ocean surface wind observations from the Advanced Scatterometer (ASCAT) on the forecast quality of the model has been verified under operational conditions. In the experiment, the operational model was used as reference, parallel to an augmented system in which the ASCAT winds were assimilated actively. Objective verification of the forecast with independent wind observations from moored buoys and ASCAT winds revealed a slight improvement in forecast skill as measured by a decrease in observation-minus-forecast standard deviation in the wind components for the short range (up to 24 h). A subjective analysis in a case study showed a realistic deepening of a low pressure system over the North Atlantic near the coast of Ireland through the assimilation of scatterometer data that were verified with radiosonde observations over Ireland. Based on these results, the decision was made to include ASCAT in operations at the next upgrade of the forecasting system.
1 July 2018 in Journal of Waterway, Port, Coastal, and Ocean Engineering
This article explores the use of the ensemble Kalman filter technique to improve the accuracy of North Sea wave field analyses. A nonhydrostatic convective-permitting mesoscale model was used to provide high-resolution forcing winds. These were adjusted by assimilating measurements of offshore wave heights directly into the wave model state. The ensemble Kalman filter data assimilation was shown to be very efficient, leading (compared to the results without data assimilation) to large reductions (up to 60%) in the root-mean-square error of the offshore wave heights and other model state variables, also (up to 40%) at locations other than those of the observations used.