Several studies exist on topics of semi-active suspension and vehicle cruise control systems in the literature, while many of them just consider actual road distortions and terrain characteristics, these systems are not adaptive and their subsystems designed separately. This study introduces a new method where the integration of look-ahead road data in the control of the adaptive semi-active suspension, where it is possible to the trade-off between comfort and stability orientation. This trade-off is designed by the decision layer, where the controller is modified based on prehistorical passive suspension simulations, vehicle velocity and road data, while the behavior of the controller can be modified by the use of a dedicated scheduling variable. The adaptive semi-active suspension control is designed by using Linear Parameter Varying (LPV) framework. In addition to this, it proposes designing the vehicle velocity for the cruise controller by considering energy efficiency and comfort together. TruckSim environment is used to validate the operation of the proposed integrated cruise and semi-active suspension control system.

This study introduces an online reconfigurable road-adaptive semi-active suspension controller that reaches the performance objectives with satisfying the dissipativity constraint. The concept of the model is based on a nonlinear static model of the semi-active Magnetorheological (MR) damper with considering the bi-viscous and hysteretic behaviors of the damper. The input saturation problem has been solved by using the proposed method in the literature that allows the integration of the saturation actuator in the initial system to create a Linear Parameter Varying (LPV) system. The control input meets the saturation constraint; therewith, the dissipativity constraint is fulfilled. The online reconfiguration and adaptivity problem is solved by using an external scheduling variable that allows the trade-off between driving comfort and road holding/stability. The control design is based on the LPV framework. The proposed adaptive semi-active suspension controller is compared to passive suspension and Bingham model with Simulink simulation, and then the adaptivity of the controller is validated with the TruckSim environment. The results show that the proposed LPV controller has better performance results than the controlled Bingham and passive semi-active suspension model.

This paper introduces a procedure for controlling autonomous vehicles entering roundabouts. The aim of the centralized controller is to define the velocity profile of each autonomous vehicle by which collisions can be avoided and traveling times can be minimized. To achieve these performances, a model predictive control is introduced based on the solution of an analytical calculation of traveling times spent in the roundabout and designing the autonomous vehicles’ velocity profiles in order to avoid conflict situations while ensuring a time-optimal solution. By the application of the proposed procedure, safety of autonomous vehicles can be enhanced and the possibility of a forming congestion can be minimized. The operation of the proposed method is demonstrated by a few simulation examples in the CarSim simulation environment.

The aim of the paper is to describe a multicriteria model predictive control method for autonomous vehicles at non-signalized intersections. The centralized controller aims to describe control action for each autonomous vehicle to guarantee collision free passage. At the same time, performances are defined for the centralized Model Predictive Controller, namely the minimization of traveling time and energy consumption. Since these control goals are often conflicting, a scheduling variable is introduced to create a balance between them. Hence, the centralized controller can be tuned based on the importance of each control goal, which can be useful in urban environment where traffic densities may vary heavily depending on the period of the day. The effectiveness of the proposed centralized multicriteria controller is demonstrated through a complex simulation example in CarSim simulation environment using different tpye of autonomous vehicles.