Environmental sustainability in the wine sector has become a priority, as a result of both the growing interest in environmental issues and the consumer's demand for more information regarding the environmental impact of the products they purchase. In this context, the use of carbon footprint as an indicator to assess and report the environmental burdens associated with wine production has gained a role of primary interest. The present study has the aim of improving the wine sector's sustainability by providing inventory data on wine production systems from a total of 18 wineries located in major wine-producing regions in Spain and the South of France. The main novelty of this paper is: the corporate carbon footprint approach, the greater number of wineries studied, the diversity of location of those wineries, the detail of data presented and the identification of the best reference flow for vineyards. Data was statistically analysed. Vineyard consumptions are usually related to the area of cultivation. However, although 1 ha of vineyard or 1 kg of harvested grape could both be considered good reference flows for vineyard processes, this study shows a greater standard deviation of average data calculated per ha rather than per kg. Impact results show a major contribution of the winery phase to the corporate carbon footprint (73%), mainly due to glass production for bottling (45.6% contribution) and electricity consumption (9.2%). In the vineyard phase, contribution comes mainly from diesel production and combustion due to field works (11.3%) and the use of phytosanitary products (6.0%). The results revealed that with the establishment of best practices and with optimized resource consumption, the corporate carbon footprint values can be reduced by almost 25%. The comparative results presented can be used as a reference that will enable wineries to compare their impacts to the average, to identify in which aspects they are within the average and which aspects they are outside the average and whether these aspects are significant to their carbon footprint. This may encourage wineries to adopt measures for Eco-innovation through carbon emission reduction.Peer ReviewedPostprint (published version
1 September 2018 in Science of The Total Environment
Leather buffing dust (BF) is a waste from tannery which is usually disposed on landfills. The interest in using wastes as fillers or reinforcements for composites has raised recently due to environmental concerns. This study investigates the potential use of BF waste as filler for a high density polyethylene matrix (HDPE). A series of HDPE-BF composites, containing filler concentrations ranging from 20 to 50wt%, were formulated, injection molded and tested. The effect of filler contents on the mechanical properties of the composites were evaluated and discussed. Composites with BF contents up to 30wt% improved the tensile strength and Young’s modulus of the matrix, achieving similar mechanical properties to polypropylene (PP). In the case of flexural strength, it was found to be proportionally enhanced by increasing reinforcement content, maintaining high impact strength. These composites present great opportunities for PP application areas that require higher impact resistance. The materials were submitted to a series of closed-loop recycling cycles in order to assess their recyclability, being able to maintain better tensile strength than virgin HDPE after 5 cycles. The study develops new low-cost and sustainable composites by using a waste as composite filler.
4 March 2023 in The International Journal of Life Cycle Assessment