We demonstrate the imaging of ferromagnetic carbon steel samples and we detect the thinning of their profile with a sensitivity of 0.1 mm using a Cs radio-frequency atomic magnetometer. Images are obtained at room temperature, in magnetically unscreened environments. By using a dedicated arrangement of the setup and active compensation of background fields, the magnetic disturbance created by the samples' magnetization is compensated. Proof-of-concept demonstrations of non-destructive structural evaluation in the presence of concealing conductive barriers are also provided. The relevant impact for steelwork inspection and health and usage monitoring without disruption of operation is envisaged, with direct benefit for industry, from welding in construction to pipeline inspection and corrosion under insulation in the energy sector.
Imaging of structural defects in a material can be realized with a radio-frequency atomic magnetometer by monitoring the material’s response to a radio-frequency excitation field. We demonstrate two measurement configurations that enable the increase of the amplitude and phase contrast in images that represent a structural defect in electrically conductive and magnetically permeable samples. Both concepts involve the elimination of the excitation field component, orthogonal to the sample surface, from the atomic magnetometer signal. The first method relies on the implementation of a set of coils that directly compensates the excitation field component in the magnetometer signal. The second takes advantage of the fact that the radio-frequency magnetometer is not sensitive to the magnetic field oscillating along one of its axes. Results from simple modelling confirm the experimental observation and are discussed in detail.
1 January 2019 in Review of Scientific Instruments
Non-destructive inductive testing of defects in metal plates using the magnetic resonance signal of a radio-frequency atomic magnetometer is demonstrated. The shape and amplitude of the spatial profile of the signal features, which represent structural defects, are explored. By comparing numerical and experimental results on a series of benchmark aluminium plates, we show correspondence between the properties of the secondary field and those of the magnetometer signal. In particular, we show that two components of the secondary field are mapped onto the amplitude and phase of the atomic magnetometer signal. Hence, a magnetic field measurement with the atomic magnetometer, although scalar in its nature, provides semi-vectorial information on the secondary field. Moreover, we demonstrate a robust process for determining defect dimensions, which is not limited by the size of the sensor. We prove that the amplitude and phase contrast of the observed profiles enables us to reliably measure defect depth.
Comagnetometers have been validated as valuable components of the atomic physics toolbox in fundamental and applied physics. So far, the explorations have been focused on systems involving nuclear spins. Presented here is a demonstration of an active alkali-metal (electronic) system, i.e., a dual-frequency spin maser operating with the collective cesium and spins. The experiments have been conducted in both magnetically shielded and unshielded environments. In addition to the discussion of the system's positive-feedback mechanism, the implementation of the dual-frequency spin maser for industrial nondestructive testing is shown. The stability of the and spin precession frequency ratio measurement is limited at the level by the laser frequency drift, corresponding to a frequency stability of for s integration time. We discuss measurement strategies that could improve this stability to nHz, enabling measurements with sensitivities to the axion-nucleon and axion-electron interactions at the levels of and GeV, respectively.
Radio-frequency atomic magnetometers offer attractive alternatives to standard detection methods in nondestructive testing, which are based on inductive measurements. We demonstrate a magnetometer in the so-called spin maser configuration, which addresses two important challenges of the technique: shifts in the radio frequency resonance position caused by magnetically permeable samples and the sensor bandwidth. Key properties of the self-oscillating sensor are presented in both a magnetically shielded and an open environment. Demonstration of defect detection via magnetic induction tomography in a ferromagnetic carbon steel sample is presented. The configuration discussed paves the way for a simple, rapid, and robust nondestructive material defect detection system based on an atomic magnetometer.
The capabilities of a radio-frequency atomic magnetometer for object detection based on magnetic induction tomography are explored. The determination of object orientation is demonstrated by utilizing the measurement geometry. The self-compensation configuration of the atomic magnetometer is implemented to address the issue of saturation of the sensor response by the radio-frequency primary field that generates the object signature. Three methods of “covert” detection are investigated as a testbed for exploring the functionalities of this sensor, where (1) the operational frequency of the sensor is continuously changed, (2) the primary field has non-monochromatic frequency distribution, and (3) the sensor operates in the so-called spin maser mode. The results of the measurements are also discussed in terms of possible magnetic field communication.