The development of underground space, as a critical strategy for enhancing urban land use efficiency, requires careful consideration of the effects that new construction may have on existing foundations and structures to prevent safety hazards such as foundation damage. This paper investigates the influence of shield tunnel construction on the pile foundations of adjacent bridges. Based on the shield tunnel project intersecting the Haiqin Bridge pile foundations along a segment of the Guangzhou–Zhuhai Intercity Railway as a case study, a finite element (FE) model was developed. The validity of the numerical method was confirmed through comparison with existing model test results. Building on this foundation, this paper analyzed the impact patterns of shield tunnel construction on existing bridge pile foundations. Additionally, the model was employed to assess how variables such as the relative spatial positioning between the pile foundations and the tunnel, as well as the stiffness coefficient of the pile foundations, affect the structural response of the piles. The findings reveal that shield tunnel construction crossing adjacent bridge pile foundations induces bending deformation of the piles toward the tunnel side. The maximum horizontal displacement and internal forces occur near the tunnel axis, whereas the peak vertical displacement is observed at the pile head. The zone most affected by tunnel excavation extends approximately one tunnel diameter (1D) before and after the pile foundation location. The vertical relative position between the tunnel and pile foundation governs the relative displacement behavior between the pile and surrounding soil during excavation. Specifically, when the pile toe moves downward relative to the tunnel, the excavation’s influence on the pile foundation shifts from being dominated by negative skin friction and settlement to positive skin friction and rebound, leading to substantial changes in the force distribution and displacement patterns within the pile. As the horizontal clearance between the tunnel and pile foundation increases, the internal forces and displacements within the pile foundation progressively diminish and eventually stabilize. Furthermore, an increase in pile stiffness coefficient decreases the maximum pile displacement and increases internal forces in the pile shaft. Pile diameter has a greater influence than Young’s modulus, which exhibits a relatively minor effect.
In view of the near-field seismic action, considering that oblique incidence of seismic waves is more realistic than vertical incidence, the seismic response of the Hong Kong–Zhuhai–Macao immersed tunnel subjected to an obliquely incident SV wave is investigated. Using the finite element method and time-domain wave method, the seismic input is transformed into an equivalent node load with a viscous–spring artificial boundary, and a three-dimensional simulation technology for SV waves of oblique incidence is presented. A half-space numerical example is given to demonstrate the accuracy of the proposed simulation technology. Taking the stress field formed by the self-weight stress and hydrostatic pressure as the initial state of the dynamic response analysis, the static–dynamic coupling numerical simulation of the seismic response of a soil-immersed tunnel system is realized. The results show that the amplification in the vertical and longitudinal response of the tunnel, due to the oblique incidence, reaches maximum when the incident angle is close to the critical angle. Furthermore, the horizontal response and incident angle show the inverse relation and tend to be stable. In addition, the oblique incidence also causes asymmetric shearing in symmetric parts of the tunnel. The root of the shear key easily produces tensile cracks, while the end angle of the shear key is prone to stress concentration and local damage. Thus, the impact of oblique incidence should be considered in the seismic design, and attention should be paid to the optimization of the end angle of the shear key and the configuration of anti-crack reinforcement at the root of shear key to meet the seismic requirements.