Fiaz Hussain

Prof. Dr. Fiaz Hussain

Department of Mechanical Engineering, Gachon University, Seongnam-si, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
AAAzam Ali
Azam Ali
Fiaz HussainFiaz Hussain
Fiaz Hussain
SASafira Attacha
Safira Attacha
AKAmbreen A kalsoom
Ambreen A kalsoom
WQWaseem Akhtar Qureshi
Waseem Akhtar Qureshi
DKDana Kremenakova
Dana Kremenakova
In the current research, we present a single-step, one-pot, room temperature green synthesis approach for the development of functional poly(tannic acid)-based silver nanocomposites. Silver nanocomposites were synthesized using only tannic acid (plant polyphenol) as a reducing and capping agent. At room temperature and under mildly alkaline conditions, tannic acid reduces the silver salt into nanoparticles. Tannic acid undergoes oxidation and self-polymerization before the encapsulating of the synthesized silver nanoparticle and forms silver nanocomposites with a thick capping layer of poly(tannic acid). No organic solvents, special instruments, or toxic chemicals were used during the synthesis process. The results for the silver nanocomposites prepared under optimum conditions confirmed the successful synthesis of nearly spherical and fine nanocomposites (10.61 ± 1.55 nm) with a thick capping layer of poly(tannic acid) (~3 nm). With these nanocomposites, iron could be detected without any special instrument or technique. It was also demonstrated that, in the presence of Fe3+ ions (visual detection limit ~20 μM), nanocomposites aggregated using the coordination chemistry and exhibited visible color change. Ultraviolet-visible (UV–vis) and scanning electron microscopy (SEM) analysis also confirmed the formation of aggregate after the addition of the analyte in the detection system (colored nanocomposites). The unique analytic performance, simplicity, and ease of synthesis of the developed functional nanocomposites make them suitable for large-scale applications, especially in the fields of medical, sensing, and environmental monitoring. For the medical application, it is shown that synthesized nanocomposites can strongly inhibit the growth of Escherichia coli and Staphylococcus aureus. Furthermore, the particles also exhibit very good antifungal and antiviral activity.

7 June 2019 in Korean Journal of Chemical Engineering
Verified
Journal Article
Closed access
PDF file
Fiaz HussainFiaz Hussain
Fiaz Hussain
samy shabansamy shaban
samy shaban
JKJinhwan Kim
Jinhwan Kim
Dong-Hwan KimDong-Hwan Kim
Dong-Hwan Kim

14 April 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
AAAzam Ali
Azam Ali
MSMariyam Sattar
Mariyam Sattar
Fiaz HussainFiaz Hussain
Fiaz Hussain
MTMuhammad Humble Khalid Tareen
Muhammad Humble Khalid Tareen
Jiří MilitkýJiří Militký
Jiří Militký
Muhammad Tayyab NomanMuhammad Tayyab Noman
Muhammad Tayyab Noman
The versatile one-pot green synthesis of a highly concentrated and stable colloidal dispersion of silver nanoparticles (Ag NPs) was carried out using the self-assembled tannic acid without using any other hazardous chemicals. Tannic acid (Plant-based polyphenol) was used as a reducing and stabilizing agent for silver nitrate in a mild alkaline condition. The synthesized Ag NPs were characterized for their concentration, capping, size distribution, and shape. The experimental results confirmed the successful synthesis of nearly spherical and highly concentrated (2281 ppm) Ag NPs, capped with poly-tannic acid (Ag NPs-PTA). The average particle size of Ag NPs-PTA was found to be 9.90 ± 1.60 nm. The colloidal dispersion of synthesized nanoparticles was observed to be stable for more than 15 months in the ambient environment (25 °C, 65% relative humidity). The synthesized AgNPs-PTA showed an effective antimicrobial activity against Staphylococcus Aureus (ZOI 3.0 mM) and Escherichia coli (ZOI 3.5 mM). Ag NPs-PTA also exhibited enhanced catalytic properties. It reduces 4-nitrophenol into 4-aminophenol in the presence of NaBH4 with a normalized rate constant (Knor = K/m) of 615.04 mL·s−1·mg−1. For comparison, bare Ag NPs show catalytic activity with a normalized rate constant of 139.78 mL·s−1·mg−1. Furthermore, AgNPs-PTA were stable for more than 15 months under ambient conditions. The ultra-high catalytic and good antimicrobial properties can be attributed to the fine size and good aqueous stability of Ag NPs-PTA. The unique core-shell structure and ease of synthesis render the synthesized nanoparticles superior to others, with potential for large-scale applications, especially in the field of catalysis and medical.

11 January 2020 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
PDF file
Fiaz HussainFiaz Hussain
Fiaz Hussain
SPSangwon Park
Sangwon Park
JJJaemin Jeong
Jaemin Jeong
SKSoo‐Jung Kang
Soo‐Jung Kang
JKJinhwan Kim
Jinhwan Kim

16 November 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
AAAzam Ali
Azam Ali
Fiaz HussainFiaz Hussain
Fiaz Hussain
AKAmbreen A kalsoom
Ambreen A kalsoom
TRTauqeer Riaz
Tauqeer Riaz
Muhammad Zaman KhanMuhammad Zaman Khan
Muhammad Zaman Khan
MAMunir ASHRAF
Munir ASHRAF
In this study, we developed multifunctional and durable textile sensors. The fabrics were coated with metal in two steps. At first, pretreatment of fabric was performed, and then copper and silver particles were coated by the chemical reduction method. Hence, the absorbance/adherence of metal was confirmed by the deposition of particles on microfibers. The particles filled the micro spaces between the fibers and made the continuous network to facilitate the electrical conduction. Secondly, further electroplating of the metal was performed to make the compact layer on the particle- coated fabric. The fabrics were analyzed against electrical resistivity and electromagnetic shielding over the frequency range of 200 MHz to 1500 MHz. The presence of metal coating was confirmed from the surface microstructure of coated fabric samples examined by scanning electron microscopy, EDS, and XRD tests. For optimized plating parameters, the minimum surface resistivity of 67 Ω, EMI shielding of 66 dB and Ohmic heating of 118 °C at 10 V was observed. It was found that EMI SH was increased with an increase in the deposition rate of the metal. Furthermore, towards the end, the durability of conductive textiles was observed against severe washing. It was observed that even after severe washing there was an insignificant increase in electrical resistivity and good retention of the metal coating, as was also proven with SEM images.

1 December 2020 in Polymer
Verified
Journal Article
Closed access
Fiaz HussainFiaz Hussain
Fiaz Hussain
JJJaemin Jeong
Jaemin Jeong
SPSangwon Park
Sangwon Park
EJEuichul Jeong
Euichul Jeong
SKSoo-Jung Kang
Soo-Jung Kang
JKJinhwan Kim
Jinhwan Kim