This tutorial review summarizes the basic concepts, design strategies and potential applications of semi-transparent organic photovoltaics (STOPVs). Challenges and research directions toward the commercialization of STOPVs are also proposed.
1 December 2018 in Journal of Colloid and Interface Science
It is still a challenge to fabricate flexible pressure sensors that possess high sensitivity, ultralow detection limit, wide sensing range, and fast response for intelligent electronic devices. We here demonstrate superelastic and highly pressure-sensitive polyimide (PI)/reduced graphene oxide (rGO) aerogel sensors with unique honeycomb structure, which were designed and fabricated using a bidirectional freezing technique. This unique honeycomb structure with large aspect ratio is composed of aligned thin lamellar layers and interconnected bridges. The combination of the aligned lamellar layers and the bridges endows the aerogel sensors with high pressure sensitivity (1.33 kPa−1), ultralow detection limit (3 Pa), broad detection range (80% strain, 59 kPa), fast response time (60 ms), and excellent stability during cycling (over 1000 cycles). Remarkably, the aerogel sensors maintain stable piezoresistive performance at −50 °C, 100 °C, and 200 °C in air, indicating promising potential applications in harsh environments. Owing to the high sensitivity and wide sensing range, the aerogel sensors have been used to detect a full-range of human motion including small-scale motion monitoring (wrist pulse, blowing, puffing) and large-scale movement monitoring (finger bending, elbow bending, walking, running). These advantages make the composite aerogels attractive for high-performance flexible pressure sensors and wearable electronic devices.
This minireview highlights the recent progress on sequential solution-processed fullerene-free OPVs, which can improve the power conversion efficiency, stability, and drive the industrial applications in semitransparent and large-area OPVs.
24 October 2022 in Journal of Materials Chemistry A
Due to high conductivity, lightweight, good corrosion resistance, and designable structure, polymer/carbon aerogels have attracted considerable attention and have become a candidate for a new generation of electromagnetic interference shielding materials. However, caused by the disordered honeycomb micropore, most polymer/carbon aerogels show relatively low absorption shielding effectiveness/total shielding effectiveness (SEA/SET) at present. This feature will restrict the application of polymer/carbon aerogels in some specific areas, such as stealth aircraft and reconnaissance planes. In this work, a regular microporous structure was designed to address the above issues through radial freeze-drying methods. The fabricated polyimide/carbon nanotube aerogels with radial needle-like porous structure show excellent thermal stability, compressive mechanical properties, and electromagnetic interference shielding performance (∼53.1 dB with a thickness of 2 mm in the axial direction). The SEA/SET value of the polyimide/carbon nanotube aerogels is as high as 94.5%.
10 June 2018 in Macromolecular Materials and Engineering