A unique concept for harvesting electrical energy from thermal energy is presented. A thermomechanical actuator was fabricated using ferromagnetic material. The device converts thermal energy into mechanical energy, which can be converted into electrical energy using piezoelectric materials. Magnetic force and operating frequency were measured on the device. Results show that the current power density at is between 1.85 and . A thermal finite element analysis model is also presented to understand the influence of thermal interface, suggesting that increases of or higher are achievable.
This paper proposes the creation of strain powered antennas that radiate electromagnetic energy by mechanically vibrating a piezoelectric or piezomagnetic material. A closed form analytic model of electromagnetic radiation from a strain powered electrically small antenna is derived and analyzed. Fundamental scaling laws and the frequency dependence of strain powered antennas are discussed. The radiation efficiency of strain powered electrically small antennas is contrasted with a conventional electric dipole. Analytical results show that operating at the first mechanical resonance produces the most efficient strain powered radiation relative to electric dipole antennas. A resonant analysis is exploited to determine the material property space that produces efficient strain powered antennas. These results show how a properly designed strain powered antenna can radiate more efficiently than an equally sized electric dipole antenna.
The performance of ultrasonic transducers is largely determined by the piezoelectric properties and geometries of their active elements. Due to the brittle nature of piezoceramics, existing processing tools for piezoelectric elements only achieve simple geometries, including flat disks, cylinders, cubes and rings. While advances in additive manufacturing give rise to free-form fabrication of piezoceramics, the resultant transducers suffer from high porosity, weak piezoelectric responses, and limited geometrical flexibility. We introduce optimized piezoceramic printing and processing strategies to produce highly responsive piezoelectric microtransducers that operate at ultrasonic frequencies. The 3D printed dense piezoelectric elements achieve high piezoelectric coefficients and complex architectures. The resulting piezoelectric charge constant, d33, and coupling factor, kt, of the 3D printed piezoceramic reach 583 pC/N and 0.57, approaching the properties of pristine ceramics. The integrated printing of transducer packaging materials and 3D printed piezoceramics with microarchitectures create opportunities for miniaturized piezoelectric ultrasound transducers capable of acoustic focusing and localized cavitation within millimeter-sized channels, leading to miniaturized ultrasonic devices that enable a wide range of biomedical applications.
13 December 2019 in IEEE Journal on Multiscale and Multiphysics Computational Techniques
An unconditionally stable finite-difference time-domain (FDTD) algorithm is proposed to predict and understand the complex response in strain-mediated multiferroic RF devices such as antennas. A system of three coupled sets of governing equations is solved simultaneously: (1) Maxwell's equations for electromagnetic (EM) wave propagation, (2) the Landau-Lifshitz-Gilbert (LLG) equation for magnetic spin response, and (3) Newton's law for acoustic behavior. The formulation of this algorithm is elaborated on in detail followed by a demonstration of its capability through the simulation of a 1.3 μm thick bulk-acoustic-wave (BAW) based strain-mediated multiferroic antenna. Analysis of the far-field radiation efficiency of this antenna as a function of magnetic DC bias demonstrates the importance of aligning the ferromagnetic resonance (FMR) and the mechanical BAW resonance to enhance EM radiation performance. Results also show that reducing the magnetic loss, or in other words reducing the FMR linewidth, represents the dominating feature to achieve higher radiation efficiencies in these antennas.
There is currently a need for an efficient approach to control magnetism at small scales (<1 mm). Work on these magnetoelectric concepts dates back to the 19th century, when researchers believed that a material could convert electrical to magnetic energy, similar to Oersted’s discovery, made by passing a current through a wire. Today, there are significant magnetoelectric research opportunities in both materials discovery and theoretical modeling efforts to advance this important area of magnetic control. Applications for these strain-mediated magnetoelectric materials range from replacing existing inefficient magnetic memory approaches to spearheading new discoveries, such as micrometer-size electromagnetic motors enabling robotic manipulation. This article and the other articles in this issue provide the motivation, background information, research opportunities, and novel applications for studying strain-mediated magnetoelectric materials. The issue is designed to encourage additional research on magnetoelectrics due to its potential impact on society through the efficient control of magnetism at the micro- and nanoscale.
This paper presents a novel approach to rectify a low mechanical frequency to a higher resonant frequency mode, i.e. frequency up conversion. The device consists of a sharp probe, micro superelastic NiTi ridges, a micro slider, and a piezoelectric bimorph cantilever. A probe tip attached on the edge of a piezoelectric cantilever travels along the ridges attached onto a micro slider mechanism. Experimental results show that power output per unit area is substantially larger than conventional resonance approaches.