This study aimed to systematically evaluate the effects of different nitrogen application rates and irrigation practices on water-saving and yield enhancement in winter wheat production in the North China Plain (NCP) using a meta-analysis. By quantifying the impacts on crop yield, nitrogen use efficiency (NUE), and water use efficiency (WUE), the research provides a scientific basis for optimizing management practices in winter wheat production in this region. A comprehensive literature search was conducted across multiple databases, resulting in the inclusion of 94 eligible studies from 2018 to 2023. A random-effects model was employed to calculate the combined effect sizes, followed by subgroup and sensitivity analyses to further investigate the influence of nitrogen application rates, irrigation methods, and study regions on winter wheat production efficiency. The findings reveal that increasing nitrogen application rates and adopting deficit irrigation practices significantly improved winter wheat yield (combined effect size: 4.53 t·ha⁻¹), NUE (43.29%), and WUE (0.013 t·ha⁻¹·mm⁻¹). The subgroup analysis further elucidated the critical roles of nitrogen application ratios, irrigation methods, and study regions in determining winter wheat production efficiency, while the sensitivity analysis confirmed the robustness of these findings, as the pooled effect sizes decreased by merely 0.69% and increased by 0.61% after excluding small-sample or highly biased studies, respectively. The above meta-analysis did not incorporate long-term field trials; hence, two-year field experiments with designed irrigation and organic–inorganic fertilizer treatments were conducted, which provided further validation for the meta-analysis. Under short-term conditions (excluding CO₂ effects), we observed that chemical fertilizer exhibited a measurable inhibitory effect on crop water uptake and optimal water–fertilizer management was achieved with a 7:3 inorganic–organic fertilizer ratio combined with 450 m³·ha⁻¹ irrigation. This study demonstrates the effectiveness of optimizing nitrogen fertilization and irrigation management in enhancing winter wheat yield and resource utilization efficiency. The findings offer actionable insights for sustainable agricultural practices in the NCP and similar regions, contributing to improved crop productivity and resource conservation.

The land surface model (LSM) is extensively utilized to simulate terrestrial processes between land surface and atmosphere in the Earth system. Hydrology simulation is the key component of the model, which can directly reflect the capability of LSM. In this study, three offline LSM simulations were conducted over China using the Community Land Model version 5.0 (CLM5) driven by different meteorological forcing datasets, namely China Meteorological Forcing Dataset (CMFD), Global Soil Wetness Project Phase 3 (GSWP3), and bias-adjusted ERA5 reanalysis (WFDE5), respectively. Both gridded and in situ reference data, including evapotranspiration (ET), soil moisture (SM), and runoff, were employed to evaluate the performance levels of three CLM5-based simulations across China and its ten basins. In general, all simulations realistically replicate the magnitudes, spatial patterns, and seasonal cycles of ET over China when compared with remote-sensing-based ET observations. Among ten basins, Yellow River Basin (YRB) is the basin where simulations are the best, supported by the higher KGE value of 0.79. However, substantial biases occur in Northwest Rivers Basin (NWRB) with significant overestimation for CMFD and WFDE5 and underestimation for GSWP3. In addition, both grid-based or site-based evaluations of SM indicate that systematic wet biases exist in all three CLM5 simulations for shallower soil layer over nine basins of China. Comparatively, the performance levels in simulating SM for deeper soil layer are slightly better. Moreover, all three types of CLM5 simulate reasonable runoff spatial patterns, among which CMFD can capture more detailed information, but GSWP3 presents more comparable change trends of runoff when compared to the reference data. In summary, this study explored the capacity of CLM5 driven by different meteorological forcing data, and the assessment results may provide important insights for the future developments and applications of LSM.

Cationic polyacrylamide (CPAM) is a commonly used flocculant for water treatment. Factors that affect the flocculation effect and can be controlled manually include the type and dosage of CPAM, wastewater pH, stirring time and settling time, and their reasonable setting is critical to the flocculation effect of CPAM. In this paper, the optimal flocculation conditions of a novel CPAM were studied. First, single-factor tests were conducted to preliminarily explore the optimal range of factors that influence CPAM flocculation, and then response surface methodology (RSM) tests were performed to accurately determine the optimums of the influencing factors. The results showed that the flocculation effect was better when the intrinsic viscosity was larger or the cationic degree of CPAM was higher. The CPAM dosage, wastewater pH and stirring time significantly impacted the flocculation effect, and inflection points were observed. A model that could guide CPAM-8.14-40.2 flocculation was obtained by RSM tests. The model optimization showed that the optimal flocculation conditions of CPAM-8.14-40.2 for treating wastewater prepared with kaolin were as follows: the CPAM dosage, wastewater pH and stirring time were 5.83 mg·L⁻¹, 7.28, and 5.95 min, respectively, and the turbidity of the treated wastewater was reduced to 6.24 NTU.

This study presents an innovative unmanned aerial vehicle (UAV)-based intelligent detection method utilizing an improved Faster Region-based Convolutional Neural Network (Faster R-CNN) architecture to address the inefficiency and inaccuracy inherent in manual wheat spike counting. We systematically collected a high-resolution image dataset (2000 images, 4096 × 3072 pixels) covering key growth stages (heading, grain filling, and maturity) of winter wheat (Triticum aestivum L.) during 2022–2023 using a DJI M300 RTK equipped with multispectral sensors. The dataset encompasses diverse field scenarios under five fertilization treatments (organic-only, organic–inorganic 7:3 and 3:7 ratios, inorganic-only, and no fertilizer) and two irrigation regimes (full and deficit irrigation), ensuring representativeness and generalizability. For model development, we replaced conventional VGG16 with ResNet-50 as the backbone network, incorporating residual connections and channel attention mechanisms to achieve 92.1% mean average precision (mAP) while reducing parameters from 135 M to 77 M (43% decrease). The GFLOPS of the improved model has been reduced from 1.9 to 1.7, an decrease of 10.53%, and the computational efficiency of the model has been improved. Performance tests demonstrated a 15% reduction in missed detection rate compared to YOLOv8 in dense canopies, with spike count regression analysis yielding R² = 0.88 (p < 0.05) against manual measurements and yield prediction errors below 10% for optimal treatments. To validate robustness, we established a dedicated 500-image test set (25% of total data) spanning density gradients (30–80 spikes/m²) and varying illumination conditions, maintaining >85% accuracy even under cloudy weather. Furthermore, by integrating spike recognition with agronomic parameters (e.g., grain weight), we developed a comprehensive yield estimation model achieving 93.5% accuracy under optimal water–fertilizer management (70% ETc irrigation with 3:7 organic–inorganic ratio). This work systematically addresses key technical challenges in automated spike detection through standardized data acquisition, lightweight model design, and field validation, offering significant practical value for smart agriculture development.

The construction of water-saving renovation projects can bring substantial benefits to the development of agriculture, but it may also be accompanied by negative impacts, especially in a large-scale irrigation district. Hence, there is always controversy, and it is vital and necessary to investigate the effectiveness of water-saving renovation. In this study, the Yahekou irrigation district, one of the largest districts in China, is selected as the case to explore the beneficial influence and adverse impact. Kriging interpolation, Pearson correlation analysis, and linear regression analysis are employed to study the temporal evolution, spatial distribution, and domain influencing factors. The results show that the water-saving renovation project in the Yahekou irrigation district had significant water-saving benefits during the period of 1998–2021, and the average annual water use of the irrigation district decreased by 61%. Canal lining is an important influencing factor for the decrease in irrigation water use, with a correlation coefficient of −0.538, B of −18.669, and R² of 0.290. Furthermore, the water-saving renovation of irrigation districts is not the dominant reason for changes in groundwater depth. Meanwhile, the groundwater depth below ground level (the level DBGL) in the irrigation district increased by 82%. The combined effects of atmospheric precipitation, canal lining, river sand mining, and groundwater exploitation have led to a sustained increase in groundwater depth in the study area. The results obtained from this study can provide valuable and scientific reference for agricultural water resource management over the large-scale irrigation district. This article focuses on the impact of water-saving renovation on ecological and technical indicators such as water use and the groundwater DBGL. However, the impact of water-saving renovation in irrigation districts is multifaceted; subsequent research can explore the impact of water-saving renovation projects on society and the economy.

Accurate estimation of evapotranspiration (ET) is critical for understanding land-atmospheric interactions. Despite the advancement in ET measurement, a single ET estimate still suffers from inherent uncertainties. Data fusion provides a viable option for improving ET estimation by leveraging the strengths of individual ET products, especially the triple collocation (TC) method, which has a prominent advantage in not relying on the availability of “ground truth” data. In this work, we proposed a framework for uncertainty analysis and data fusion based on the extended TC (ETC) and multiple TC (MTC) variants. Three different sources of ET products, i.e., the Global Land Evaporation and Amsterdam Model (GLEAM), the fifth generation of European Reanalysis-Land (ERA5-Land), and the complementary relationship model (CR), were selected as the TC triplet. The analyses were conducted based on different climate zones and land cover types across China. Results show that ETC presents outstanding performance as most areas conform to the zero-error correlations assumption, while nearly half of the areas violate this assumption when using MTC. In addition, the ETC method derives a lower root mean square error (RMSE) and higher correlation coefficient (Corr) than the MTC one over most climate zones and land cover types. Among the ET products, GLEAM performs the best, while CR performs the worst. The merged ET estimates from both ETC and MTC methods are generally superior to the original triplets at the site scale. The findings indicate that the TC-based method could be a reliable tool for uncertainty analysis and data fusion.