Lignin, a major component of lignocellulose, is the largest source of aromatic building blocks on the planet and harbors great potential to serve as starting material for the production of biobased products. Despite the initial challenges associated with the robust and irregular structure of lignin, the valorization of this intriguing aromatic biopolymer has come a long way: recently, many creative strategies emerged that deliver defined products via catalytic or biocatalytic depolymerization in good yields. The purpose of this review is to provide insight into these novel approaches and the potential application of such emerging new structures for the synthesis of biobased polymers or pharmacologically active molecules. Existing strategies for functionalization or defunctionalization of lignin-based compounds are also summarized. Following the whole value chain from raw lignocellulose through depolymerization to application whenever possible, specific lignin-based compounds emerge that could be in the future considered as potential lignin-derived platform chemicals.
Deep eutectic solvents (DESs) as novel and green solvents can extract high-purity lignin from lignocellulose in a high yield; however, further utilization of the extracted lignin in the DES is a severe challenge in biorefinery processes. Nevertheless, the potential of lignin valorization can be precisely reflected by unveiling the chemical transformations of lignin during DES pretreatment. In this study, we aimed to understand the possible transformation pathway via thorough characterization of the regenerated lignin and lignin oil and transformation of lignin into value-added products. During this process, alkali lignin (AL) isolated from poplar was pretreated with choline chloride-lactic acid (ChCl-LA) and choline chloride-oxalic acid (ChCl-OA) at 80–120 °C for 6 hours to produce the regenerated lignin and lignin oil. The yield of the regenerated lignin ranged from 44 to 75% after DES pretreatment. During ChCl-LA pretreatment, γ-acetylated groups in the regenerated lignin were observed at low temperatures and then deacylation occurred at high temperatures, which was beneficial for oxidizing lignin and producing phenolic diketones. Additionally, the depolymerization of lignin fractions was the dominant reaction during DES pretreatment, accompanied by partial condensation reactions. More importantly, this is the first report of obtaining S- and G-derived diketones from lignin oil after DES pretreatment. The degradation mechanism of lignin in the DES system has been proposed. This work opens a way to produce value-added chemicals from lignin in DESs, which needs to be researched in the future.
The temperature and pressure of the hydrothermal process occurring in a batch reactor are typically coupled. Herein, we develop a decoupled temperature and pressure hydrothermal system that can heat the cellulose at a constant pressure, thus lowering the degradation temperature of cellulose significantly and enabling the fast production of carbon sub-micron spheres. Carbon sub-micron spheres can be produced without any isothermal time, much faster compared to the conventional hydrothermal process. High-pressure water can help to cleave the hydrogen bonds in cellulose and facilitate dehydration reactions, thus promoting cellulose carbonization at low temperatures. A life cycle assessment based on a conceptual biorefinery design reveals that this technology leads to a substantial reduction in carbon emissions when hydrochar replacing fuel or used for soil amendment. Overall, the decoupled temperature and pressure hydrothermal treatment in this study provides a promising method to produce sustainable carbon materials from cellulose with a carbon-negative effect.