Peng Xiang

Dr. Peng Xiang

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2022 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
PXPeng Xiang
Peng Xiang
HXHui-Ci Xu
Hui-Ci Xu
HJHong-Guang Ji
Hong-Guang Ji
QLQi Li
Qi Li
HWHuan Wang
Huan Wang
In order to clarify the changes in the thermophysical properties of rocks in deep high-temperature strata and their influence on the temperature field of the surrounding rocks, thermal property tests were conducted on rock samples taken from 1,500 to 2,000 m depth in the Xiling well construction area of Sanshandao gold mine. According to the difference equation based on the principle of heat balance, the numerical solution of unsteady heat conduction of surrounding rock can be deduced. In addition, we can explore the dynamic process of the heat-regulating ring that under ventilation measures in deep high geothermal strata and analyze its influence on the dynamic process based on the equation. The result of the research shows that the thermal conductivity of rock is mainly determined by the mineral composition and is influenced by factors such as mesostructure. Calcite and muscovite of granite have a great impact on lithology, even they just account for a relatively small percent. As the ground temperature increases step by step, the variation of the thermal conductivity of rock is less and the thermal diffusion coefficient of rock and its ability to transmit temperature changes both decrease. On the contrary, as the specific heat capacity of rock increases, its heat storage capability enhanced. Therefore, the expansion range of the heat-regulating ring of surrounding rock is influenced by mineral composition and the temperature of the environment, and the influence of the former is much greater than the latter.

5 February 2022 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
PXPeng Xiang
Peng Xiang
HJHongguang Ji
Hongguang Ji
JGJingming Geng
Jingming Geng
YZYiwei Zhao
Yiwei Zhao
Based on the phenomena of core damage and core discing in deep strata of metal mines in Laizhou area, the physical and mechanical mechanism behind these phenomena and characteristics is discussed. The analysis shows that the damage effect of deep high stress rock is obvious after in-situ unloading, the core discing occurs when the damage reaches a certain degree, and the time effect of damage increases with the increase of buried depth. The characteristics of core discing are closely related to the stress environment and the mesostructure and mineral composition of the rock. Monzogranite with a large particle size and high content of potassium feldspar is easier to occur core discing than granodiorite in this area. The mechanism of core discing in Sanshandao gold mine is as follows: tensile failure occurs in the middle of the core, and composite failure of shear and tension occurs at the edge. The crack extends from the middle of the core to the outer edge, and finally, the tensile crack and shear crack intersect and connect to form a cake crack. Considering the stress condition and strength conditions of core discing, the energy release rate of rock mass in the core discing area is large, which has the conditions for strong rock burst. In addition, the ratio of maximum stress to tensile strength at the starting position of core discing is about 6.5 in this area, which is consistent with the previous analysis, so as to provide a strong basis for calculating in-situ stress based on the core discing phenomenon.

16 July 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
HSHengxaing SHEN
Hengxaing SHEN
HJHongguang Ji
Hongguang Ji
PXPeng Xiang
Peng Xiang
ZTZhuhua Tian
Zhuhua Tian
GSGuangning Su
Guangning Su
To investigate the effect of temperature on the dynamic mechanical properties of rubber–polypropylene fiber concrete (RPFC), dynamic mechanical parameters and energy parameters of RPFC at different temperatures were obtained using the Split Hopkinson Pressure Bar (SHPB) test. Subsequently, the particle size distribution and fractal dimension of RPFC were calculated through a standard square-hole sieving test, and the relationship between the energy dissipation per unit volume and the fractal dimension was analyzed. Finally, by introducing a temperature damage factor and a strain damage factor, a dynamic damage constitutive model of RPFC considering both temperature and strain damage was established. The results show that under the same impact pressure, the dynamic peak strength of RPFC first decreases and then increases with rising treatment temperature, with a maximum increase of 24.3% and a maximum decrease of 16.5%. The dynamic elastic modulus shows a decreasing trend, with a maximum reduction of up to 14.8%. Due to the anchoring effect of polypropylene fibers within the concrete matrix, the failure energy per unit volume first increases and then decreases. As the unit failure energy increases, the increment of the fractal dimension at 100 °C is greater than that at 25 °C. At 300 °C, the high-temperature melting of polypropylene fibers generates steam, which helps relieve internal pore pressure caused by high temperatures, thereby reducing internal damage in RPFC. The increase in fractal dimension under this condition is gradual and approximately linear. The fitting of the experimental stress–strain curves indicates that the dynamic constitutive model incorporating thermal and strain damage is applicable to rubber and polypropylene fiber-reinforced concrete.

23 November 2020 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
FZFu-Yao Zhao
Fu-Yao Zhao
PXPeng Xiang
Peng Xiang
Based on the mixture theory and previous work, the governing equation of the rotary vibration of rigid friction pipe pile in unsaturated soil is established. The analytical solution of this equation can be used to analyze the displacements and the complex stiffness of rotary vibration. The results show that the contribution to stiffness is as follows: solid < liquid < gas; and the contribution to rotational impedance is as follows: solid > liquid > gas. In addition, when the fluid permeability coefficient decreases, the stiffness decreases and the rotational impedance increases, but the influence is not obvious (especially the gas permeability coefficient). Four different kinds of degradation problems are also presented. Relevant conclusions can provide reference for engineering application.

24 January 2023 in Frontiers in Earth Science
Verified
Journal Article
Open access
PXPeng Xiang
Peng Xiang
HJHong Guang Ji
Hong Guang Ji
GZGuang Quan Zhang
Guang Quan Zhang
WLWen Guang Li
Wen Guang Li
To address the challenge of designing grouting reinforcement in a deep shaft to control water, this study established an elastic-plastic analytical formula for the grouted rock surrounding a shaft under the combined action of thermal, hydraulic, and mechanical fields based on the Mohr–Coulomb yield criterion. The various rules and influencing factors of stability and impermeability of the grouted rock surrounding the shaft are calculated and analyzed. The analysis shows that damage to the surrounding rock is aggravated by the action of high ground temperature and high water pressure in deep shafts, and the influence of water pressure is particularly significant. The larger the radius and cohesion of the grouted surrounding rock, the smaller the radius of its plastic zone. With an increase in the elastic modulus ratio between the grouted surrounding rock and the original rock, the radius of its plastic zone increases, so the elastic modulus of the grouted surrounding rock design should consider the original surrounding rock. With a decrease in the permeability coefficient of the grouted surrounding rock, the radial stress decreases, the tangential stress increases, and the radius of the plastic zone increases. The development of plastic zone not only affects the stability but also causes an increase in the permeability coefficient. There is mutual restriction and influence between the shaft water inflow, the permeability coefficient, the radius of the grouted surrounding rock, and the radius of its plastic zone. In the design of grouting reinforcement, the stability of surrounding rock and the control requirements of shaft water inflow should be comprehensively considered and the optimal parameters should be selected based on theoretical calculation. This study provides a theoretical basis for the optimization of grouting reinforcement parameters in a deep shaft.

22 May 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MLMing Li
Ming Li
PXPeng Xiang
Peng Xiang
HSHengxaing SHEN
Hengxaing SHEN
HJHongguang Ji
Hongguang Ji
DQDaolu Quan
Daolu Quan
WWWensheng Wang
Wensheng Wang
The asymmetric excavation unloading activity of a rock slope with a fault has an important influence on the stability of the slope and the division of the surrounding surface influence area. Based on the engineering background of the West Open-Pit Mine in Fushun City, orthogonal testing, K-means clustering, range analysis, and variance analysis were used to study the linkage mechanism of the asymmetric excavation unloading action and the weak structure in the rock slope, as well as their effects on slope stability and the influence area. This analysis showed that the significant factors affecting the stability zones of the north and south slopes were the excavation inclination angles of the opposite slopes. When the excavation inclination of the north slope increased by 10 degrees, the safety factors decreased by 25.9% and 16.6%. When the excavation inclination of the south slope increased by 10 degrees, the safety factors decreased by 13.7% and 1.9%. A second significant factor was the excavation depth. The occurrence of faults in the slope was the main factor affecting the range of slope instability. In order to ensure production safety, the excavation inclination angle of a slope with a fault should be limited to no more than 40°, and the excavation depth of an unstable area with two slopes should be designed to be no more than 450 m. The influence of asymmetric excavation unloading on the stability of a rock slope with a fault structure is expounded. This also provides a theoretical basis for controlling slope stability and influence areas in large-scale open-pit mining projects.