We conducted a shipboard ballast water test using seawater of extreme turbidity collected from Shanghai Port (China) (>300 mg total suspended solids (TSS)/L), and normal seawater collected in other ports (<100 mg TSS/L). All three types of International Maritime Organization (IMO)-approved ballast water management system (BWMS) tested failed to properly operate because of filter clogging or insufficient generation of oxidants under near-fresh water conditions with extremely high concentration of suspended solid during ballasting. It was also found that the number of microorganisms increased with longer ballast water retention time, with higher numbers in the treated discharge water. The results suggest that when operating a BWMS involving a filter unit in areas with water having high concentrations of suspended solids, the filter unit should be used during ballast water discharge, rather than during ballasting. This method has the advantage of removing ≥50 µm organisms at discharge that could not be removed by a filter during ballasting. For ballast water retained for long storage times, the results suggest the use of BWMSs involving UV units or electrolysis during deballasting. In addition, BWMSs involving electrolysis units provide the opportunity to maintain residual total residual oxidant (TRO) levels, using a partial ballast tank. Although the BWMSs tested are a small subset of the large number of IMO-approved BWMSs, the results demonstrate that there is a significant gap between the technology currently available and capacity to meet IMO and US Coast Guard standards.

An in situ mesocosm experiment was performed to investigate the combined effects of ocean acidification and warming on the coastal phytoplankton standing stock and species composition of a eutrophic coastal area in the temperate-subtropical region. Experimental treatments of natural seawater included three CO₂ and two temperature conditions (present control: ~400 μatm CO₂ and ambient temperature, acidification conditions: ~900 μatm CO₂ and ambient temperature, and greenhouse conditions: ~900 μatm CO₂ and ambient temperature +3 °C). We found that increased CO₂ concentration benefited the growth of small autotrophic phytoplankton groups: picophytoplankton (PP), autotrophic nanoflagellates (ANF), and small chain-forming diatoms (DT). However, in the greenhouse conditions, ANF and DT abundances were lower compared with those in the acidification conditions. The proliferation of small autotrophic phytoplankton in future oceanic conditions (acidification and greenhouse) also increased the abundance of heterotrophic dinoflagellates (HDF). These responses suggest that a combination of acidification and warming will not only increase the small autotrophic phytoplankton standing stock but, also, lead to a shift in the diatom and dinoflagellate species composition, with potential biogeochemical element cycling feedback and an increased frequency and intensity of harmful algal blooms.

Global ecological concern regarding the transfer of fouling organisms to ship hulls is increasing. This study investigated the species composition, dominant species, distribution patterns, community structure, and life-cycle differences of hull-fouling macroinvertebrates on five research vessels (R/Vs: Isabu, Onnuri, Eardo, Jangmok 1, and Jangmok 2) operated by the Korea Institute of Ocean Science and Technology (KIOST). Hull-fouling macroinvertebrates were collected three to five times on quadrats from the upper and middle sectors of the hull sides, bottom, and niche areas (the propellers, shafts, and thrusters). A total of 47 macroinvertebrate species were identified, represented by 8519 individuals (ind.)/m² and a biomass of 1967 gWWt/m² on the five vessels. The number of species, density, and biomass were greater on the coastal vessels Eardo, Jangmok 1, and Jangmok 2 than on the ocean-going vessels the Isabu and Onnuri. Among the coastal vessels, barnacles were the most abundant and had the greatest density, while mollusks had the highest biomass. Differences between hull sectors showed that the highest species abundance and density appeared on all hulls in ports and bays where the Jangmok 1 operated, while the highest species abundance, density, and biomass were identified in the niche areas of the Eardo, which operated farther from the coast. The hull-fouling macroinvertebrates that exceeded 1% of all organisms were the barnacles Amphibalanus amphitrite, Balanus trigonus, and Amphibalanus improvisus; the polychaete Hydroides ezoensis; the bivalves Magallana gigas and Mytilus galloprovincialis; and the amphipod Jassa slatteryi. The dominant species were cosmopolitan and globally distributed, and many of them were cryptogenic. Six native species were identified: M. gigas, H. ezoensis, the amphipod Melita koreana, the isopod Cirolana koreana, and the barnacles B. trigonus and F. kondakovi. Eight non-indigenous species (NIS) were detected: the barnacles A. amphitrite and A. improvisus, the bivalve M. galloprovincialis, the polychaete Perinereis nuntia, the amphipods J. slatteryi and Caprella californica, and the bryozoans Bugulina californica and Bugula neritina. Of the fouling macroinvertebrates found on the vessel hulls, 13% were native, and 17% were NIS. More diverse communities developed on the hulls of vessels that operated locally rather than globally or in deep oceans. The species diversity index correlated positively with the total number of anchoring days and coastal operation days and negatively with the total number of operation days and ocean operation days. The macroinvertebrates differed by the area of operation, the port of anchorage, the number of days in operation and at anchor, and the hull sectors. There is no previous research data on hull-fouling macroinvertebrates in the Republic of Korea, and this study provides a basis for future studies to identify introduced species and their differences based on operation area.

An enzyme in a nematocyst extract of the Nemopilema nomurai jellyfish, caught off the coast of the Republic of Korea, catalyzed the cleavage of chymotrypsin substrate in an amidolytic kinetic assay, and this activity was inhibited by the serine protease inhibitor, phenylmethanesulfonyl fluoride. We isolated the full-length cDNA sequence of this enzyme, which contains 850 nucleotides, with an open reading frame of 801 encoding 266 amino acids. A blast analysis of the deduced amino acid sequence showed 41% identity with human chymotrypsin-like (CTRL) and the CTRL-1 precursor. Therefore, we designated this enzyme N. nomurai CTRL-1. The primary structure of N. nomurai CTRL-1 includes a leader peptide and a highly conserved catalytic triad of His⁶⁹, Asp¹¹⁷, and Ser²¹⁶. The disulfide bonds of chymotrypsin and the substrate-binding sites are highly conserved compared with the CTRLs of other species, including mammalian species. Nemopilema nomurai CTRL-1 is evolutionarily more closely related to Actinopterygii than to Scyphozoan (Aurelia aurita) or Hydrozoan (Hydra vulgaris). The N. nomurai CTRL1 was amplified from the genomic DNA with PCR using specific primers designed based on the full-length cDNA, and then sequenced. The N. nomurai CTRL1 gene contains 2434 nucleotides and four distinct exons. The 5′ donor splice (GT) and 3′ acceptor splice sequences (AG) are wholly conserved. This is the first report of the CTRL1 gene and cDNA structures in the jellyfish N. nomurai.

Copepods, the dominant member of zooplankton and major grazers of phytoplankton in the pelagic ecosystem, are at risk from exposure to antifouling biocides. To evaluate the developmental toxicity of antifouling biocides (Diuron, Irgarol 1051, Sea-nine 211) and wastewater (from high-pressure water blasting (WHPB) and its MeOH extract (WHPB-MeOH)) in the copepod Paracalanus parvus sl, we investigated the chemical concentration, egg-hatching rate, and nauplius mortality. WHPB samples were obtained through hull-cleaning activities involving WHPB in a dry dock. Among the biocides, Sea-nine 211 had the strongest effects on hatching rates and nauplius mortality, which was followed by Diuron and Irgarol 1051. In the WHPB and WHPB-MeOH samples, there was no significant difference between the experimental groups in terms of the egg-hatching rate; however, WHPB was found to be more toxic in terms of nauplius mortality, suggesting that metals in WHPB may also adversely affect nauplius survival in P. parvus sl. A comparison of the LC₅₀ results of Sea-nine 211 and WHPB revealed that WHPB had a negative effect on nauplius mortality even at a 100-fold lower concentration. Therefore, if chemical contaminants generated during in-water cleaning activity are discharged continuously into the ports without being properly collected through a post-treatment system, they are expected to negatively impact the population of copepods near the port. Although verification is needed through additional experiments, our results could be used for a baseline study concerning the toxicity of antifouling biocides on marine copepod species.

Herein, we evaluate the scientific basis for managing hull fouling of ships entering Korean ports, diagnose biological risks that may occur when in-water cleaning (IWC) systems remove hull fouling, and present a protocol for evaluating these risks (the Korean Infection Modes and Effects Analysis; K-IMEA). Protocol development included the selection of core elements and scenario design for IWC and the evaluation of regrowth experiments. The K-IMEA index was designed by considering the inoculation pathway of attaching organisms in all processes to ships that enter a port for in-water cleaning. A number of risk indices were defined: R1—Introduction/Establishment of alien species before in-water cleaning; R2—Establishment of alien species escaped during in-water cleaning; R3—Introduction/Establishment of alien species after in-water cleaning; and R4—Establishment of alien species in effluent water. K-IMEA regrowth experiments (R2 and R4) using the in-water cleaning effluent showed that the attachment and regrowth of prokaryotes, microalgae, and macroalgae were successfully detected. In particular, prokaryotes were observed in samples filtered through a 5 μm mesh of the in-water cleaning effluent, even at a low fouling rating (Levels 1–2). These experiments suggest a necessity to consider a secondary treatment method in addition to the primary filtration method for the treatment of in-water cleaning effluents.