Bassam Mohamed

Dr. Bassam Mohamed

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2020 in International Journal of Electrical Power & Energy Systems
Verified
Journal Article
Closed access
AKArpan Koirala
Arpan Koirala
LSLucía Suárez-Ramón
Lucía Suárez-Ramón
BMBassam Mohamed
Bassam Mohamed
PAPablo Arboleya
Pablo Arboleya

1 February 2018 in IEEE Transactions on Power Systems
Verified
Journal Article
Open access
Pablo ArboleyaPablo Arboleya
Pablo Arboleya
BMBassam Mohamed
Bassam Mohamed
IMIslam Mahmoud
Islam Mahmoud
This work presents a comprehensive set of steady state models to be included in power flow simulation studies of DC railway networks. This simulation framework covers all important aspects and features of each element of modern DC railways. The proposed models are simplified to achieve the maximum simulation speed while keeping the required accuracy. Not only non-reversible, controlled and uncontrolled reversible substations are considered, but also on-board and off-board accumulation systems. The train model can consider the low network receptivity (overvoltage protection for trains equipped with regenerative braking) and overcurrent protection. It is also possible to include in the simulation DC/DC links between nodes of the railway network at the same or different voltage. To date, there is no other work able to conjugate all the mentioned models in a complex multi-train scenario.

28 April 2015 in IEEE Transactions on Power Systems
Verified
Journal Article
Closed access
PAPablo Arboleya
Pablo Arboleya
BMBassam Mohamed
Bassam Mohamed
Cristina González-MoránCristina González-Morán
Cristina González-Morán
IMIslam Mahmoud
Islam Mahmoud
In this paper, a new procedure based on a backward/forward sweep (BFS) algorithm for solving power flows in weakly meshed dc traction networks is presented. The proposed technique is able to consider the trains as nonlinear and nonsmooth (nondifferentiable) voltage-dependent loads or generators. This feature permits the inclusion of the trains' overcurrent protection and the squeeze control. With the use of the mentioned controls, the conventional power flow problem becomes a voltage constrained power flow problem, and the interaction between the trains and the network can be accurately modeled. However, the train control induces a highly nonsmooth voltage-dependent load characteristic, causing convergence problems in most of the derivative-based algorithms. The proposed algorithm is faster, more robust, and more stable than the derivative-based ones. In addition, the authors present all of the formulation in a compact matrix-based form by means of the graph theory application and the node incidence matrix.

1 June 2016 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
PGPablo Garcia
Pablo Garcia
PAPablo Arboleya
Pablo Arboleya
BMBassam Mohamed
Bassam Mohamed
AVAbel Alberto Cuadrado Vega
Abel Alberto Cuadrado Vega
This paper proposes a combined distributed/centralized architecture for the control and monitoring of a hybrid dc/ac microgrid (MG) with energy storage capabilities. The monitoring system is based on an own developed C++ framework for the measurement and real-time state estimation of the MG. Calculations running at sampled values frequency ( ${\mathbf 10}\ \text{kHz}$ ) are implemented into a set of distributed measurement and processing units, which have a TCP/IP communication link with a central server running the power flow algorithm. The architecture is fully scalable, with the only restrictions of the signal processing capabilities of the distributed units, LAN bandwidth, and central server calculation capabilities. The proposed system includes the hardware and software architecture for the monitoring of the MG, the communications scheme, the implementation of real-time algorithms for grid state estimation, a graphical user interface including different visualization alternatives, and data storing/retrieving capabilities.

24 March 2017 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
BMBassam Mohamed
Bassam Mohamed
Pablo ArboleyaPablo Arboleya
Pablo Arboleya
Cristina González-MoránCristina González-Morán
Cristina González-Morán
This paper proposes a Modified Current Injection method for power flow analysis, bespoke for the specific features of dc traction networks. It introduces major contributions when compared with the state-of the-art solution. In addition to simulating the nonlinear and nonsmooth behavior of the trains, the proposed algorithm can simulate reversible IGBT-based and nonreversible diode-based substations present in the system. These latter substations are the most common type and they supply unidirectional power flow from the ac distribution network to the dc traction subsystem. Depending on the voltage level at the dc side, the substations will be either blocked or conducting. This nonlinear behavior increases significantly the system complexity. Another key aspect of the proposed method is that it is also valid for heavily meshed networks. Even when the dc systems are usually radial or weakly meshed, the connections between the dc and the ac systems create multiple meshes, increasing the network topological complexity. In order to validate the performance of the proposed solution, the behavior of the algorithm is compared with the conventional derivative-based Trust Region Dogleg and the backward/forward sweep algorithm. This comparison shows convergence and speed improvements in the performance of the proposed algorithm.

1 July 2017 in Electric Power Systems Research
Verified
Journal Article
Open access
Cristina González-MoránCristina González-Morán
Cristina González-Morán
PAPablo Arboleya
Pablo Arboleya
BMBassam Mohamed
Bassam Mohamed
A Backward/Forward Sweep (BFS) algorithm for power flow calculations adapted to matrix formulation in the αβ0 reference frame is presented in this paper. The novelty of the work is the definition of a BFS solver with the following characteristics: matrix formulation in αβ0 frame, valid for unbalanced three phase or single phase systems and capable of handling transformers and distributed generators; Slack, PQ or PV nodes. The matrix formulation avoids the difficulties of load-flow methods presented in the literature: lack of generalization for arbitrary network topologies and transformer connections; the αβ0 stationary reference frame makes the algorithm easily applicable to distribution systems; and finally, the BFS algorithm is an efficient, robust and fast solver. The IEEE Node Test Feeders will be used to provide test systems under several configurations. Comparison to a direct algorithm will demonstrate the improvements in robustness, efficiency and computation time.