In the last decade, remarkable developments have concerned the methods of space charge measurement in the field of insulation systems diagnostic. In particular, methods based on acoustic and thermal phenomena have been largely used. The present review provides a broad overview on the different techniques used describing, for each of them, the working principle, the main features and the most relevant applications. Further details are provided for the Pulsed Electro-Acoustic (PEA) method, as it seems to be the most used. This article provides more details on its historical evolution, showing evidence for its technological limits and taking into consideration the advantages and drawn from the different configurations of the measuring cell. A similar approach has been used for the group of thermal methods, whereas for the optical methods only the basic working principle and latest applications are reported.

In this paper the effects of temperature on partial discharge (PD) activity taking place inside a spherical void in epoxy resin system are studied. Indeed, some experimental tests previously performed on specimens, having different void shapes, under multi-stress condition of temperature and voltage, have shown very different PD amplitude distributions at temperatures higher than ambient. However, this phenomenon cannot be explained only by taking into account the different thermobaric conditions of the enclosed gas. In consequence of the general physical inaccessibility of such voids, a study is here performed using a numerical model based on an evolutionary optimization algorithm. This is used to evaluate the range values for the physical parameters of the insulating system influencing the observed changes in PD activity. Finally, comments are presented about the adopted criteria by which the comparison between the experimental data and the simulated ones is performed, and about the interpretation of the dependence on temperature of the experimental PD.

The non linear effects of soil ionisation on the behaviour of earth electrodes are investigated by a finite difference time domain numerical scheme. A time variable soil resistivity is used in order to simulate the soil breakdown; step by step the resistivity value is controlled by the local instantaneous value of the electric field compared with the electrical strength, fixed for the soil. No a priori hypothesis about the geometrical shape of the ionised zone around the electrodes has to be enforced. Simulation results related to complex earth electrodes of limited extension are reported. The model has been validated by comparing the computed results with data available in technical literature. A discussion about dangerous earth voltages is reported, by underlining the role of soil ionisation. Electrodes of larger extension can be straightforwardly simulated by means of larger computational resources.