Catalyst sintering, a main cause of the loss of catalytic activity and/or selectivity at high reaction temperatures, is a major concern and grand challenge in the general area of heterogeneous catalysis. Although all heterogeneous catalysts are inevitably subjected to sintering during their operation, the immediate and drastic consequences can be mitigated by carefully engineering the catalytic particles and their interactions with the supports. In this tutorial review, we highlight recent progress in understanding the physical chemistry and materials science involved in sintering, including the discussion of advanced techniques, such as in situ microscopy and spectroscopy, for investigating the sintering process and its rate. We also discuss strategies for the design and rational fabrication of sinter-resistant catalysts. Finally, we showcase recent success in improving the thermal stability and thus sinter resistance of supported catalytic systems.

The massive plastic production worldwide leads to a global concern for the pollution made by the plastic wastes and the environmental issues associated with them. One of the best solutions is replacing the fossil-based plastics with bioplastics. Bioplastics such as polylactic acid (PLA) are biodegradable materials with less greenhouse gas (GHG) emissions. PLA is a biopolymer produced from natural resources with good mechanical and chemical properties, therefore, it is used widely in packaging, agriculture, and biomedical industries. PLA products mostly end up in landfills or composting. In this review paper, the existing life cycle assessments (LCA) for PLA were comprehensively reviewed and classified. According to the LCAs, the energy and materials used in the whole life cycle of PLA were reported. Finally, the GHG emissions of PLA in each stage of its life cycle, including feedstock acquisition and conversion, manufacturing of PLA products, the PLA applications, and the end of life (EoL) options, were described. The most energy-intensive stage in the life cycle of PLA is its conversion. By optimizing the conversion process of PLA, it is possible to make it a low-carbon material with less dependence on energy sources.