Food preservation is an essential application for polymers, particularly in packaging. Complex multilayer films, such as those used for modified atmosphere packaging (MAP), extend the shelf life of sensitive foods. These mostly contain various polymers to achieve the necessary combination of mechanic, optic, and barrier properties that limit their recyclability. As the European Union’s Circular Economy Action Plan calls for sustainable products and business models, including waste prevention policies and recycling quotas, with plastic packaging being a high priority, solutions towards more sustainable multilayer packaging are urgently needed. This study evaluated and compared the recycling potential of functionally equivalent PET (polyethylene terephthalate) and PP (polypropylene) post-consumer MAP through structure analysis and recycling simulation. The structure analysis revealed that both types of MAP contained functional (stability) and barrier layers (oxygen and moisture). The recycling simulation showed that the PP-based packaging was recyclable 10 times, maintaining its mechanical properties and functionality. At the same time, the PET-based MAP resulted in a highly brittle material that was unsuitable for reprocessing into similar economic value products. The secondary material from the PP-based MAP was successfully manufactured into films, demonstrating the functional possibility of closed-loop recycling. The transition from a linear to a circular economy for MAP is currently still limited by safety concerns due to a lack of sufficient and efficient purification methods, but the proper design of multilayers for recyclability is a first step towards circularity.

The influence of reactive processing, non reactive and reactive copolymers on immiscible polypropylene (PP)–polystyrene (PS) blends with varying PS concentrations (10 wt.% and 25 wt.%) was evaluated by mechanical (tensile and tensile impact), rheological (melt flow rate, extensional and dynamic rheology) and morphological (scanning electron microscopy) analysis. As an extended framework of the study, the creation of a link to industrial applicable processing conditions as well as an economically efficient use of compatibilzing agent were considered. For radical processed blends, a high improvement in melt strength was observed while non reactive copolymers exhibited a pronounced increase in toughness and ductility correlated with overall best phase homogeneity. Conversely, the influence of the reactive copolymer was quite different for the varied PS concentrations not allowing the assumption of a specific trend for resulting blend properties, but nevertheless in the case of a lower PS concentration the tensile impact strength exceeded the value of virgin PP. Since PS and PP are widely used, the findings of this work could not only be relevant for the generation of more versatile blends compared to virgin components but also for recycling purposes, allowing the enhancement of specific properties facilitating the production of more valuable secondary materials.