The structure of non-pneumatic tire is complex and various, but its performance is superior to ordinary tire, so it has broad prospects. In this paper, a design method of honeycomb structure was proposed based on tangent method, and the hexagonal and circular honeycomb structure were established. The rules of displacement, radial stiffness and ground pressure of honeycomb structure with different density were studied. Meanwhile, the most basic bearing performance of non-pneumatic tire was analyzed by finite element method under static conditions. The results show that the radial stiffness of honeycomb increases with the increase of density. When the density is small, the bearing capacity of circular structure is stronger than that of hexagonal structure, the ground pressure decreases with the increase of density and the maximum stress of the two is located on the honeycomb structure. When the density is high, the maximum stress is on the contact surface between the rim and the inner circumference. This study provides a reference for other types of non-pneumatic tire structure design and builds the foundation to study contact performance analysis of non-pneumatic tire under complex working conditions.

Different driving styles should be considered in path planning for autonomous vehicles that are travelling alongside other traditional vehicles in the same traffic scene. Based on the drivers’ characteristics and artificial potential field (APF), an improved local path planning algorithm is proposed in this paper. A large amount of driver data are collected through tests and classified by the K-means algorithm. A Keras neural network model is trained by using the above data. APF is combined with driver characteristic identification. The distances between the vehicle and obstacle are normalized. The repulsive potential field functions are designed according to different driver characteristics and road boundaries. The designed local path planning method can adapt to different surrounding manual driving vehicles. The proposed human-like decision path planning method is compared with the traditional APF planning method. Simulation tests of an individual driver and various drivers with different characteristics in overtaking scenes are carried out. The simulation results show that the curves of human-like decision-making path planning method are more reasonable than those of the traditional APF path planning method; the proposed method can carry out more effective path planning for autonomous vehicles according to the different driving styles of surrounding manual vehicles.

The traditional chassis has the problems of low trafficability and poor stability under complex and changeable unstructured conditions. Thus, a wheel rail composite chassis is proposed. The chassis had a tracked travel mechanism at the front wheels and a wheeled travel mechanism at the rear wheels. This study presents the design, theoretical analysis and dynamic simulation analysis of the chassis. The maximum values of the passability of the wheel–track composite chassis that can be passed were calculated according to the relevant parameters. Furthermore, the chassis was modeled and simulated using RecurDyn to verify whether the values were reasonable. According to different values of the terrain, slope, vertical obstacle height and trench width, the change regularity of the track tension and driving torque of the chassis were obtained. The chassis is designed to improve the vehicle’s ability to operate under complex and diverse unstructured conditions.

In order to improve the active safety of vehicles, the control strategy of the vehicle automatic emergency braking system is studied. The hierarchical control idea is used to model the control strategy. The upper controller is a collision time model for the decision-making of vehicle braking deceleration, and the collision time threshold is determined under the condition of considering comfort. According to the braking deceleration output by the upper controller, the lower controller controls the vehicle by adjusting the throttle opening and braking pipeline pressure through PID control. Based on the typical test conditions of C-NCAP, a joint simulation test of CarSim and Matlab/Simulink for hierarchical control strategy is carried out. In order to achieve further verification, several groups of test conditions are conducted, and finally its effectiveness is verified, which can ensure the safety of drivers.