In order to make up for the shortcomings of independent sensors and provide more reliable estimation, a multi-sensor fusion framework for simultaneous localization and mapping is proposed in this paper. Firstly, the light detection and ranging (LiDAR) point cloud is screened in the front-end processing to eliminate abnormal points and improve the positioning and mapping accuracy. Secondly, for the problem of false detection when the LiDAR is surrounded by repeated structures, the intensity value of the laser point cloud is used as the screening condition to screen out robust visual features with high distance confidence, for the purpose of softening. Then, the initial factor, registration factor, inertial measurement units (IMU) factor and loop factor are inserted into the factor graph. A factor graph optimization algorithm based on a Bayesian tree is used for incremental optimization estimation to realize the data fusion. The algorithm was tested in campus and real road environments. The experimental results show that the proposed algorithm can realize state estimation and map construction with high accuracy and strong robustness.

Four-wheel independent drive electric vehicles have become the latest development trend of electric vehicles due to their simple structure and high control accuracy. Aiming at the sliding problem of four-wheel independent driving electric vehicles in the driving process, a driving anti-skid control strategy is designed. The strategy includes two contents: (1) a road recognition module that tracks the best slip rate in real time; (2) a slip rate control module that uses fuzzy PID control. Then, based on Carsim and MATLAB/Simulink, the vehicle dynamics model, tire model and driving anti-skid control model are established. A simulation of the driving anti-skid control algorithm is carried out to verify the feasibility of the control strategy. Finally, based on the built-up dSPACE semi-physical experimental simulation platform, the verification was carried out, and the test and simulation results were compared to verify the effective feasibility of the driving anti-skid control strategy.

Conveyor belts are key pieces of equipment for bulk material transport, and they are of great significance to ensure safe operation. With the development of belt conveyors in the direction of long distances, large volumes, high speeds, and high reliability, the use of inspection robots to perform full inspections of belt conveyors has not only improved the efficiency and scope of the inspections but has also eliminated the dependence of the traditional method on the density of sensor arrangement. In this paper, relying on the wireless-power-supply orbital inspection robot independently developed by the laboratory, aimed at the problem of the deviation of the belt conveyor, the methods for the diagnosis of the deviation of the conveyor belt and FPGA (field-programmable gate array) parallel computing technology are studied. Based on the traditional LSD (line segment detection) algorithm, a straight-line extraction IP core, suitable for an FPGA computing platform, was constructed. This new hardware linear detection algorithm improves the real-time performance and flexibility of the belt conveyor diagnosis mechanism.

Vehicle yaw stability control is an important part of the active safety of electric vehicles. In order to realize the yaw stability control of vehicles, this paper takes 4-WID electric vehicles as the research object, studies the nonlinear estimation of the state parameters of the lateral stability dynamic system and the yaw stability control strategy. The vehicle state parameter estimation strategy, based on the unscented Kalman filter (UKF) algorithm and the model predictive control algorithm, are designed to control the vehicle yaw stability, which realizes the safe and stable driving of the vehicle. Through CarSim–Simulink joint simulation and hardware-in-the-loop (HIL) experiments based on MicroAutoBox, the effectiveness and real-time performance of the designed control strategy are fully verified, which accelerate the development process of the vehicle controller, and realizes the safe and stable driving of the vehicle.

In order to improve the stability of vehicle steering on low-adhesion road surfaces, this paper designed a hybrid robust control strategy, H₂/H_∞, for active front-wheel steering (AFS) based on robust control theory. Firstly, we analyzed the influence of the sidewall stiffness and road adhesion coefficient of the tires on vehicle stability, through which we can study the wheel deflection characteristics of low-adhesion roads. Secondly, the reference yaw velocity of the vehicle was calculated using the three-degrees-of-freedom model as the reference model, through which, taking the norm H_∞ as the objective function and the norm H₂ as the limit to control the output, the hybrid robust control strategy H₂/H_∞ of the AFS system on a low-adhesion road surface was developed. Finally, the simulation experiment was carried out by the Simulink/CarSim co-simulation platform and a hardware-in-the-loop (HIL) experiment. In this paper, the results show that the AFS control strategy can improve the vehicle handling stability on low-adhesion road surfaces, and the controller has good path tracking performance and robustness.