Milad Sheydaei

Dr. Milad Sheydaei

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2024 in Surfaces
Verified
Journal Article
Open access
PDF file
MSMilad Sheydaei
Milad Sheydaei
The corrosion of metals is very important, both economically and environmentally, and is a serious concern. Since the past decades, traditional (chemical) corrosion inhibitors to prevent corrosion have been and are still being used. Although these inhibitors can be said to be a good choice among other protection techniques because of their good efficiency, the toxicity of many of them causes environmental problems, and, due to the change in the laws on the use of chemicals, many of them are no longer allowed. Hence, during the past years, research on green corrosion inhibitors (GCIs) increased and very favorable results were obtained, and now they are very popular. It can be said that biodegradability and easy preparation are their most important factors. Meanwhile, the use of plants, especially their extracts, has been studied a lot. Plant extracts contain compounds that have anti-corrosion properties. In this review, the use of plants as GCIs is investigated, focusing on recent advances in their use. Also, the phenomenon of corrosion, corrosion protection (including coatings, nanoparticles, and chemical inhibitors), and other GCIs are briefly reviewed.

9 March 2021 in Journal of Sulfur Chemistry
Verified
Journal Article
Closed access
MEMilad Edraki
Milad Edraki
MSMilad Sheydaei
Milad Sheydaei
EAEbrahim Alinia-Ahandani
Ebrahim Alinia-Ahandani
ENErfan Nezhadghaffar-Borhani
Erfan Nezhadghaffar-Borhani
In this study, polyvinyl chloride (PVC) was largely dechlorinated using sodium trisulfide (Na2S3) and ethanol. During the process, we successfully incorporated trisulfide bonds into the PVC structure. The structural characteristics of the samples were identified by Fourier transform infrared (FTIR) spectroscopy. The morphological and thermal properties of the samples were studied using X-ray diffraction (XRD) and differential scanning calorimetry (DSC) and thermogravimetric analysis techniques (TGA), respectively. The amounts of chlorine and sulfur were measured by energy-dispersive X-ray spectroscopy (EDX). Also, proton nuclear magnetic resonance (1H NMR) was used to confirm the chemical structure. Moreover, the Na2S3 was characterized by Ultraviolet–visible-near infrared (UV-VIS-NIR) spectroscopy. The results showed that, with the addition of sulfur to the PVC, the crystallinity is partly reduced. The thermal behaviors of the samples showed that after modification, the glass transition temperature and melting temperature would occur at lower temperatures. In addition, the degradation of the sulfur samples included three DTGA peaks. Furthermore, the presence of sulfur caused a change in the degradation temperature and weight loss during these stages. GRAPHICAL ABSTRACT

20 January 2017 in Journal of Polymer Engineering
Verified
Journal Article
Closed access
PDF file
MBMohammad Ali Bagherinia
Mohammad Ali Bagherinia
MSMilad Sheydaei
Milad Sheydaei
MGMasoud Giahi
Masoud Giahi
In this study, polyvinyl chloride (PVC)/rice straw (RS)/graphene oxide (GO) sustainable nanocomposite was prepared using the direct compounding method. Structural, morphological and mechanical properties of fabricated sustainable nanocomposites were compared with unfilled and RS-filled PVC compounds. Mechanical characteristics of PVC decreased with loading RS fibers. The main reason for the mechanical failure of PVC/RS composite is the incompatibility between PVC and RS fibers. GO nanosheets are used here to improve the compatibility between RS fibers and PVC macromolecules. Compared to the neat PVC, maximum strength of the RS/GO-loaded PVC composite increased up to 31%, with incorporating only 1 wt% of GO nanosheets. This enhancement in the mechanical characteristics of PVC/RS/GO nanocomposite can only be due to the role of GO nanosheets as a compatibilizer, as 1 wt% GO loading can only increase the mechanical strength of PVC compounds up to 9%. Fourier transform infrared spectroscopy results are used here to study the nature of these behaviors. It is suggested that the non-covalent and physical interactions between cellulose/hemicellulose portions of RS fibers and GO functional groups result in the enhancement of mechanical characteristics. Consequently, GO can be considered as a new compatibilizer for fabricating high performance PVC-based sustainable nanocomposites.

29 March 2020 in Journal of Sulfur Chemistry
Verified
Journal Article
Closed access
MSMilad Sheydaei
Milad Sheydaei
EAEbrahim Alinia-Ahandani
Ebrahim Alinia-Ahandani
Good resistance to the solvent, UV radiation and excellent adhesion to surfaces are the significant features of polysulfide polymers. They are known to have extensive applications as sealants and a variety of coatings. In this work, a polysulfide copolymer was synthesized using linear and aromatic organic monomers (methylene dichloride and α,α′-dichloro-p-xylene) and sodium tetrasulfide aqueous monomer. Using carbon nanotube (CNT) modified by acid (CNTCOOH), the nanocomposites of poly(methylene-xylene tetrasulfide) (PMXTS) were synthesized via in situ polymerization. The structural characteristics of polysulfide copolymer, modified CNT and nanocomposites were identified by Fourier transform infrared (FTIR) and Raman spectroscopies. Increasingly, morphological and thermal properties of samples are studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry and thermogravimetric analysis techniques, respectively. Also, the molecular weight of the copolymer was determined by proton nuclear magnetic resonance (1H NMR). The results showed that along increasing CNTCOOHs in the nanocomposites, glass transition temperature occurs at higher temperatures, and melting temperature increased wonderfully, but did not have a significant effect on the degradation temperature. Furthermore, the copolymer is dissolved partially in dimethyl sulfoxide (DMSO) but the presence of CNTCOOHs reduces this solubility.

18 September 2020 in Journal of Macromolecular Science, Part A
Verified
Journal Article
Closed access
MSMilad Sheydaei
Milad Sheydaei
MEMilad Edraki
Milad Edraki
EAEbrahim Alinia-Ahandani
Ebrahim Alinia-Ahandani
EREnayat Ollah Moradi Rufchahi
Enayat Ollah Moradi Rufchahi
PGPegah Ghiasvandnia
Pegah Ghiasvandnia
In this work, two polysulfide polymers were synthesized using aromatic organic monomer (α,α′-dichloro-p-xylene) and sodium disulfide (Na2S2) and sodium tetrasulfide (Na2S4) aqueous monomers. Then, the curing process of the polymers was carried out at 170° C using a rheometer. The structural characteristics of synthesized and cured samples were identified by Raman and Fourier transform infrared (FT-IR) spectroscopies. Also, morphological and thermophysical properties of samples were studied by using the X-ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. Moreover, the molecular weight of the synthesized samples was determined by proton nuclear magnetic resonance (1H NMR). Furthermore, the mechanical properties and hardness of the samples were investigated by tensile test and Shore A. The results showed that in the noncured samples during the increase of sulfur in the polymer structure, solubility was increased whereas it decreased the hardness, melting point (Tm ) and glass transition temperature (Tg ) of polymers. But in cured samples, hardness and Tg increase by increasing sulfur and the mechanical properties also improved. This is due to the increase in crosslinks. Also, Tm and solubility are not observed due to the formation of crosslinks.

4 May 2016 in Journal of Sulfur Chemistry
Verified
Journal Article
Closed access
MSMilad Sheydaei
Milad Sheydaei
HJHamed Jabari
Hamed Jabari
HDHamidreza Ali-Asgari Dehaghi
Hamidreza Ali-Asgari Dehaghi
Copolymers of linear and aromatic polysulfide blocks are synthesized using interfacial polymerization of dichloro-xylene-based aromatic and ethylene-dichloride-based non-aromatic organic monomers. Synthesized copolymers consist of poly(ethylene sulfide) as well as ploy (xylene sulfide) blocks. Fascinating properties of linear and aromatic polysulfide species are gathered in the structure of synthesized polysulfide copolymers. Ethylene dichloride and α,α′-dichloro-p-xylene are used as the non-aromatic and aromatic organic monomers, respectively. To investigate the influences of sulfur contents in the backbone of the polymer on the thermal stability of synthesized copolymers, poly(ethylene-xylene disulfide) (PEXDS), poly(ethylene-xylene trisulfide) (PEXTRS) and poly(ethylene-xylene tetrasulfide) (PEXTS) copolymers are synthesized using, respectively, sodium disulfide, sodium trisulfide and sodium tetrasulfide, as aqueous monomers. Compared to both linear and nonlinear homopolymers, synthesized copolymers exhibit improved thermal stability. Moreover, the thermal degradation temperatures of synthesized copolymers improve by decreasing the number of sulfur atoms in the backbone of copolymers. These results reveal that thermal degradation of polysulfide copolymers can be tailored by controlling the polysulfide chain’s sulfur contents. Structural characteristics of synthesized polysulfide copolymers are also investigated using Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy and X-ray diffraction analysis.