The performance of two prominent laser beam projection system types is analyzed through wave-optics numerical simulations for various atmospheric turbulence conditions, propagation distances, and adaptive optics (AO) mitigation techniques. Comparisons are made between different configurations of both a conventional beam director (BD) using a monolithic-optics-based Cassegrain telescope and a fiber-array BD that uses an array of densely packed fiber collimators. The BD systems considered have equal input power and aperture diameters. The projected laser beam power inside the Airy size disk at the target plane is used as the performance metric. For the fiber-array system, both incoherent and coherent beam combining regimes are considered. We also present preliminary results of side-by-side atmospheric beam projection experiments over a 7-km propagation path using both the AO-enhanced beam projection system with a Cassegrain telescope and the coherent fiber-array BD composed of 21 densely packed fiber collimators. Both wave-optics numerical simulation and experimental results demonstrate that, for similar system architectures and turbulence conditions, coherent fiber-array systems are more efficient in mitigation of atmospheric turbulence effects and generation of a hit spot of the smallest possible size on a remotely located target.
Computational efficiency and accuracy of wave-optics-based Monte–Carlo and brightness function numerical simulation techniques for incoherent imaging of extended objects through atmospheric turbulence are evaluated. Simulation results are compared with theoretical estimates based on known analytical solutions for the modulation transfer function of an imaging system and the long-exposure image of a Gaussian-shaped incoherent light source. It is shown that the accuracy of both techniques is comparable over the wide range of path lengths and atmospheric turbulence conditions, whereas the brightness function technique is advantageous in terms of the computational speed.
The process of the propagation of vortex laser beams in a turbulent atmosphere with recording of the total orbital angular momentum (OAM) and determination of the beam’s statistical characteristics, such as the average over realizations of the turbulent medium and the variance of fluctuations, has been simulated numerically. The dependences of OAM fluctuations on the turbulence intensity and the initial topological charge of the beam have been obtained. Numerical results are compared with the earlier asymptotic estimates.
Methods and peculiarities of parallel algorithms for numerical simulation of optical wave propagation are considered. A scalar parabolic equation for the complex amplitude of monochromatic-wave field was solved numerically using the Fourier transform method for homogeneous media and split-step Fourier method for inhomogeneous media. Two parallel algorithms have been constructed—with the use of OpenMP technology with the MKL library for Intel multicore processors and CUDA technology for NVIDIA graphics accelerators. Speed comparison of these algorithms with each other and with a conventional sequential two-dimensional algorithm from the FFTW library is carried out by calculating the average number of test task solutions per second. It is shown that the parallel algorithms have a significant speed advantage (by tens of times) over the common sequential algorithm; and the larger the grids in a computation task, the more significant the advantage. Comparison of the above parallel algorithms shows the following: the approach based on the OpenMP technology holds the lead for grids of up to 1024 × 1024 in size, while the approach using CUDA technology was faster for large grids (from 1024 × 1024 or larger). The results are discussed, and recommendations on switching from sequential algorithms to the parallel ones are given.
The influence of the degree of transmitting beam coherence on the bit error rate in free-space optical communication systems is studied. It is found that there are optimal values of the output power and degree of coherence of a transmitter optical beam, defined by the Fried radius, for all types of propagation paths (horizontal, vertical, or inclined) and different degrees of manifestation of turbulent effects. The optimal degree of coherence can be determined from the calculated BER minimum.