Due to the increasing of fuel prices and volatile of environmental regulations, it is a challenge for Naval Architects to design a ship dealing with an optimum ship’s total resistance. The conventional design of catamaran hull has not satisfied yet to reduce the ship’s total resistance. This paper presents a numerical investigation into gaining sufficient reduction of the ship’s total resistance of catamaran through optimizing her hull form. To achieve this research objectives, a numerical optimization modelling coupled with a Computational Fluid Dynamics (CFD) approach has been successfully conducted. Several parameters such as length, beam and draft of catamaran hull have been taken into account towards reducing the ship’s total resistance. Here, the simulation constraints are applied to obtain the optimum dimension, where the length, beam and draft of the catamaran hull were optimized within the range of 1.2 m to 1.5 m, 0.11 m to 0.14 m and 0.07 m to 0.08 m, respectively. In general, the optimization simulation revealed that the optimum dimension of the catamaran hull resulted in reduction of the total ship’s resistance. The results showed that the optimum length, beam and draft of hull led to reduce by 21.08%, 16.95% and 17.91%, respectively. Merely, this numerical optimization simulation provides a useful way for reducing the total ship’s resistance of the catamaran at the preliminary design stage.
1 December 2020 in IOP Conference Series: Materials Science and Engineering
The present study aims to assess the Tsunami hazard in Palu due to the future Tsunamigenic event in terms of near-shore and far-field Tsunami runup, inundation height, and Tsunami arrival time along the coast of Palu. A numerical model is developed to simulate propagation and inundation in the study area. Four scenarios are conducted, which consists of the Tsunamigenic earthquake and aerial subsidence as an approach for mimicking hypothetical potential landslide. The outcome from simulation such as inundation height each grid points then calculated with building footprint stored data – derivation data from the terrain model to develop a Tsunami hazard map. Preliminary Tsunami Hazard Map is made to classify the Tsunami hazard level by existing classification added with estimated building impacted and arrival time ashore on each village in Palu City administrative region.