Laser-assisted thermal electron-hydrogen atom elastic scattering was studied in the first-born approximation. The initial and final states of the projectile electron are described by the modified Volkov wavefunctions known as Volkov-Thermal wavefunctions. The laser-assisted thermal electron with energy ranges from 0.511 MeV to 4 MeV was considered to study the differential cross section (DCS) at azimuthal angles 30° and 14.7°, and laser-assisted field photon energy 1 eV to 3 eV are very weak at room temperature is around the room temperature 280 K to 300 K. The destructive interference was observed when a thermal electron absorbed a single photon from the laser field but no interference was found when a thermal electron emitted an electron to the laser field at a scattering angle . The DCS with eT scattering was found to be greater than a nonthermal electron in presence of laser field with scattering angle and incidence energy of the electron.
The objective of this work is to study the differential cross-section in the presence of a weak laser field (visible and UV) in the case of inelastic scattering. When the target absorbs the energy, the differential cross section increases, according to the theoretically constructed model. The differential cross-section initially decreases to a minimum and finally takes a max-imum value, when the target emits the energy. The energy emission occurs at 5 eV, 10 eV, 13 eV, 16 eV, 20 eV, 25 eV, and 30 eV. In addition, the differential cross-section also in-creases with the scattering angle.
1 February 2025 in Journal of the Nigerian Society of Physical Sciences
This study aims to investigate the differential cross-section (DCS) in a non-monochromatic laser-assisted thermal environment. Building on existing research, which primarily explores electron dynamics and ionization processes without considering thermal effects, this work seeks to bridge this research gap by examining the DCS under non-monochromatic laser fields in a thermal environment. The methodology involves utilizing a vector potential derived by Milosvic to represent non-monochromatic laser fields and applying a semi-classical approximation with the help of Volkov solutions. The S-matrix is then obtained to study the DCS. The developed model was computed to analyze the nature of the DCS. The results indicate that the DCS for photon absorption is higher than for emission due to atomic oscillation/excitation. This causes atom expansion upon absorption and a decrease in field strength during emission. Furthermore, the DCS behavior varies with the phase of the non-monochromatic wave and polarization, with distinct patterns observed for absorption and emission scenarios. The DCS with energy at different rates of absorption and emission exhibits a damping nature. Additionally, the DCS shows oscillatory behavior with separation distance, displaying higher values for absorption and varying with laser phase. The findings provide valuable insights into electron-atom interactions under laser fields in thermal conditions, with implications for quantum thermal machines, photochemistry, proton exchange membrane fuel cells (PEMFC), and more.
The goal of this study is to investigate the efficacy of tea-derived absorbents for the removal of heavy metals from contaminated water. For this, absorbents were prepared from milk tea (MT) waste, Ilam tea (IT) waste, and various types of tea leaves, including Immature (IML), mature (ML), and old leaves (OL). The characterization of the absorbents revealed distinct physical and chemical properties from X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR), with varying degrees of effectiveness observed across different absorbent types. Heavy metal removal efficiency was assessed using a chemical-free UV-spectrophotometer. The results show that the maximum removal efficiency for Cd using the IT absorbent reaches up to 82.14 % with 100 ppm cetyltrim ethylammonium bromide (CTAB), while the minimum removal efficiency is 32.14 % using the OL absorbent with 20 ppm CTAB. For Zn, the OL absorbent demonstrates a maximum removal efficiency of 52.59 % with 100 ppm CTAB, whereas the minimum efficiency is 3.70 % using the ML absorbent with 20 ppm CTAB. For Ni, the highest removal efficiency is achieved with the ML absorbent, reaching up to 97.73 % with 100 ppm CTAB, and the lowest is 31.82 % with the MT absorbent with 20 ppm CTAB. The addition of a catalyst further enhanced removal efficiencies in both absorbents and metals. Also, the removal of heavy metal ions using 0.05 g of tea absorbent combined with CTAB at varying concentrations. Results show that the addition of 20 ppm and 100 ppm CTAB significantly reduces metal ion concentrations from an initial 100 mg/L. The metal ion concentration decreases as CTAB concentration increases, demonstrating the effectiveness of CTAB in enhancing the absorption capacity of tea absorbent for heavy metal removal. The investigation of selective adsorption of Ni, Zn, and Cd by an adsorbent, revealing competitive adsorption behavior with Ni and Zn being adsorbed more rapidly than Cd, suggesting the impact of metal ion interference on adsorption efficiency. However, limitations were observed with certain absorbent types; for instance, immature leaves did not effectively remove Ni. Overall, this study underscores the potential of tea-derived absorbents as sustainable solutions for mitigating heavy metal pollution in industrial wastewater. Further research is needed to optimize absorbent formulations and explore their applicability in real-world environmental remediation scenarios.
The aim of this work is to synthesize and characterize nitrogen-doped carbon quantum dots (N-CQDs) and investigate their opto-electrical, photonic and thermal sensing properties. N-CQDs were prepared by mixing 2 g of citric acid with 0.02 g of urea and heating the mixture in a 1100 W microwave oven at 200–250 °C for 5 min. The resulting dark-brown powder was analyzed using FTIR, which confirmed the presence of functional groups at 641.24 cm⁻¹ (–P–O, –S–O, aromatic –CH), 1177.18 cm⁻¹ (–O–C linkages), 1721.05 cm⁻¹ (C = C), 2938.71 cm⁻¹ (CH₂/CH₃), and a distinct peak at 1585.43 cm⁻¹ corresponding to C = N stretching, indicating successful nitrogen doping. In the XRD patterns is display a peak at around 20°, indicating and ordered carbon atom in N-CQDs. Optical characterization through the visible spectrometer and PL studies at different temperatures along with laser exposure displayed a good tunability was observed. The concentration-dependent absorption and transmittance of N-CQDs were observed to have a maximum value at concentration 100%. Photoluminescence intensity of samples was apparently temperature dependent and the highest intensity was obtained at 60 °C. The treated samples have a higher transmittance than resistance and short-time-treated ones on laser irradiation condition. The FTO glass based electrode was fabricated for sensing applications, and the prototype device was proposed to investigate opto-electrical and thermal responses. The voltage-dependent luminescence gradually enhanced with the applied voltage from 1 V to 5 V, demonstrating good field-induced emission properties. Thermal response revealed a decrease of resistance from 144.9 Ω at 30 °C to 106.4 Ω at 60 °C, semiconductor-like behaviour was observed. The results show that N-CQDs have tunable photoluminescence, stable thermosensitivity and controllable charge transport properties, which are promising device for low-cost sensors, temperature monitoring and quantum biosensing application.