The solution of the dynamic equations of the six-axis accelerometer is a prerequisite for sensor calibration, structural optimization, and practical application. However, the forward dynamic equations (FDEs) and inverse dynamic equations (IDEs) of this type of system have not been completely solved due to the strongly nonlinear coupling relationship between the inputs and outputs. This article presents a comprehensive study of the FDEs and IDEs of the six-axis accelerometer based on a parallel mechanism. Firstly, two sets of dynamic equations of the sensor are constructed based on the Newton–Euler method in the configuration space. Secondly, based on the analytical solution of the sensor branch chain length, the coordination equation between the output signals of the branch chain is constructed. The FDEs of the sensor are established by combining the coordination equations and two sets of dynamic equations. Furthermore, by introducing generalized momentum and Hamiltonian function and using Legendre transformation, the vibration differential equations (VDEs) of the sensor are derived. The VDEs and Newton–Euler equations constitute the IDEs of the system. Finally, the explicit recursive algorithm for solving the quaternion in the equation is given in the phase space. Then the IDEs are solved by substituting the quaternion into the dynamic equations in the configuration space. The predicted numerical results of the established FDEs and IDEs are verified by comparing with virtual and actual experimental data. The actual experiment shows that the relative errors of the FDEs and the IDEs constructed in this article are 2.21% and 7.65%, respectively. This research provides a new strategy for further improving the practicability of the six-axis accelerometer.
Multi-degree-of-freedom (DOF) precision positioning stages (PPS) based on displacement amplifiers are commonly designed and used in precision engineering applications. However, the equivalent load and cross-coupling effects in these PPS can adversely impact the kinematic performance of the displacement amplifiers, resulting in a significant reduction in positioning accuracy. To this end, a novel mathematical model has been developed based on the chain-based compliance matrix (CMM) and the beam constraint model, enabling precise calculation of the amplification ratio and input stiffness of the compound bridge-type amplifier (CBTA). Firstly, an analytical model of the CBTA with asymmetric input force characteristics has been developed based on the CMM. A comparison with existing analytical models and finite element analysis (FEA) results demonstrates that the proposed model offers higher computational accuracy than the current models. Then, the structural stiffness and cross-coupling model of the PPS were derived using the beam constraint model. To further validate the effectiveness and scalability of the proposed method, the kinematic model of the XY PPS, based on the CBTA, was investigated. Finally, the correctness of the proposed theoretical model was verified through FEA and experimental validation. Taking into account the effects of load and cross-coupling, the amplification ratio and input stiffness errors of the XY PPS were both found to be less than 9.44% and 9.52%, respectively. Therefore, the proposed analysis model provides a new perspective for the design and application of multi-DOF PPS based on displacement amplifiers.
In this paper, a fast numerical iterative algorithm is proposed based on the Pseudo-Rigid-Body-Model and geometric method to deal with the problem of the offset-type flexible Delta mechanism forward kinematics with multiple solutions and without analytical solutions. In forward kinematics, the quartic kinematic equations are reduced to quadratic ones by variable substitution. As the simplest nonlinear equations, quadratic equations can be represented by the coefficient matrices which is suitable for computer calculation. And due to the operational properties of the matrix, the updating and iterative process in the steps of Newton’s method can be simplified and improved to solve the forward kinematics more efficiently. The convergence and singularity of the proposed iterative algorithm are also analysed. By controlling the offset-type flexible micro-motion Delta parallel mechanism to move along three different expected spatial trace curves and measuring the displacements, the experiment results show that the Root Mean Square Error between the measured values and the expected values of linear positioning is 0.9177 μm for 37.4166 μm. Moreover, it is proved by numerical examples that the proposed iterative algorithm takes only 0.53 ms on average to solve the forward kinematic problems. The calculation time is reduced by 90.3% on average compared to the traditional Newton’s method, which provides a feasible solution for real-time control based on forward kinematics.