Youzheng Cui

Prof. Youzheng Cui

Qiqihar University
+1
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 June 2025 in Metals
Verified
Journal Article
Open access
PDF file
Youzheng CuiYouzheng Cui
Youzheng Cui
DWDongyang Wang
Dongyang Wang
MZMinli Zheng
Minli Zheng
QLQingwei Li
Qingwei Li
HMHaijing Mu
Haijing Mu
QHQingming Hu
Qingming Hu
During the dry machining of 6061 aluminum alloy, cemented carbide tools often suffer from severe wear and built-up edge (BUE) formation, which significantly shortens tool life. Inspired by the non-smooth surface structure of dung beetles, this study proposes an elliptical dimple–groove composite bionic micro-texture, applied to the rake face of cemented carbide tools to enhance their cutting performance. Four types of tools with different surface textures were designed: non-textured (NT), single-groove texture (PT), circular dimple–groove composite texture (AKGC), and elliptical dimple–groove composite texture (TYGC). The cutting performance of these tools was analyzed through three-dimensional finite element simulations using the Deform-3D (version 11.0, Scientific Forming Technologies Corporation, Columbus, OH, USA) software program. The results showed that, compared to the NT tool, the TYGC tool exhibited the best performance, with a reduction in the main cutting force of approximately 30%, decreased tool wear, and significantly improved chip-breaking behavior. Based on the simulation results, a response surface model was constructed to optimize key texture parameters, and the optimal texture configuration was obtained. In addition, a theoretical model was developed to reveal the mechanism by which the micro-texture reduces interfacial friction and temperature rises by shortening the effective contact length. To verify the accuracy of the simulation and theoretical analysis, cutting experiments were further conducted. The experimental results were consistent with the simulation trends, and the TYGC tool demonstrated superior performance in terms of cutting force reduction, smaller adhesion area, and more stable cutting behavior, validating both the simulation model and the proposed texture design. This study provides a theoretical foundation for the structural optimization of bionic micro-textured cutting tools and offers an in-depth exploration of their friction-reducing and wear-resistant mechanisms, showing promising potential for practical engineering applications.

1 March 2022 in Coatings
Verified
Journal Article
Open access
PDF file
Youzheng CuiYouzheng Cui
Youzheng Cui
FWFengjuan Wang
Fengjuan Wang
QHQingming Hu
Qingming Hu
WZwei zhang
wei zhang
The surface morphology of parts has an important influence on service performance, such as wear resistance, fatigue resistance, and corrosion resistance. For example, the fatigue fracture resistance of the surface of the automobile cover mold directly determines the quality of the workpiece and the service life of the mold. In nature, the pit-shaped non-smooth form of the surface of certain organisms has good fatigue resistance. Using laser processing and other methods to prepare a pit-shaped bionic non-smooth surface on the surface of the part is an effective method to improve the fatigue resistance of the mold surface. Ball-end milling can form a regularly distributed pit-like surface morphology, and has the advantages of high processing efficiency, wide operating range, and low production cost compared with those of laser processing and preparation technology. It provides a new processing method for efficient milling preparation of bionic surfaces. In this paper, the morphology of the quadrilateral pits on the surface of the dung beetle is used as the prototype of the bionic design, and the mechanism of the antifatigue crack propagation characteristics of the quadrilateral pits of the bionic dung beetle is revealed and analyzed. The fatigue crack growth has a good retarding effect. At the same time, through numerical simulation and experimental research on the fatigue crack growth characteristics of the surface of the bionic pit, the results show that the source of fatigue cracks often starts inside the surface of the processed bionic pit, and the surface of the quadrilateral pit on the surface of the bionic dung beetle has good antifatigue crack growth characteristics.

10 July 2025 in Machines
Verified
Journal Article
Open access
PDF file
Youzheng CuiYouzheng Cui
Youzheng Cui
XLXinmiao Li
Xinmiao Li
MZMinli Zheng
Minli Zheng
HMHaijing Mu
Haijing Mu
CLChengxin Liu
Chengxin Liu
QHQingming Hu
Qingming Hu
During the service life of automotive panel stamping dies, the surface is often subjected to high loads and repeated friction, resulting in excessive wear. This leads to die failure, reduced machining accuracy, and decreased production efficiency. To enhance the anti-friction and wear-resistant performance of die steel surfaces, this study introduces the concept of biomimetic engineering in surface science. By mimicking microstructural configurations found in nature with outstanding wear resistance, biomimetic functional surfaces were designed and fabricated. Specifically, quadrilateral dimples inspired by the back of dung beetles, pentagonal scales from armadillo skin, and hexagonal scales from the belly of desert vipers were selected as biological prototypes. These surface textures were fabricated on Cr12MoV die steel using high-speed ball-end milling. Finite element simulations and dry sliding wear tests were conducted to systematically investigate the tribological behavior of surfaces with different dimple geometries. The results showed that the quadrilateral dimple surface derived from the dung beetle exhibited the best performance in reducing friction and wear. Furthermore, the milling parameters for this surface were optimized using response surface methodology. After optimization, the friction coefficient was reduced by 21.3%, and the wear volume decreased by 38.6% compared to a smooth surface. This study confirms the feasibility of fabricating biomimetic functional surfaces via high-speed ball-end milling and establishes an integrated surface engineering approach combining biomimetic design, efficient manufacturing, and parameter optimization. The results provide both theoretical and methodological support for improving the service life and surface performance of large automotive panel dies.

17 September 2020 in Materials
Verified
Journal Article
Open access
PDF file
Youzheng CuiYouzheng Cui
Youzheng Cui
MZMinli Zheng
Minli Zheng
WZwei zhang
wei zhang
BWBen Wang
Ben Wang
YSYonglei Sun
Yonglei Sun
WWWeiran Wang
Weiran Wang
In this study, we aimed to process the biomimetic function surface by designing a prototype for modeling the pits on a dung beetle body and the abdomen of a desert viper, and by using high speed milling and controlling the ratio of row spacing to feed rate. Firstly, we conducted three-dimensional parametric modeling and static analysis of the bionic functional surface using 3D modeling software UGNX (12.0, SIEMENS AG, Munich, Germany) and finite element analysis software ABAQUS (2018, Dassault, Providence, RI, USA). Then, the analysis results were imported into the fatigue life analysis software nCode (2018, HBM United Kingdom Ltd., South Yorkshire, UK) to simulate the fatigue characteristics of different bionic pit morphology models. Per the simulated tensile fatigue testing machine, the result shows that the minimum fatigue life value of the quadrilateral pit surface of the simulated dung beetle is one and four times higher than the hexagonal pit morphology and the irregular pit morphology, respectively, whereas the maximum fatigue damage is lower by one and five orders of magnitude, respectively. The quadrilateral pit surface on the biomimetic dung beetle body has better fatigue resistance, which can considerably improve the fatigue damage distribution state and the fatigue life of hardened steel die surfaces. The influential regulation of milling parameters on fatigue performance was studied and the results show that the fatigue resistance of the model is optimal when milling parameters are: row spacing of 0.4 mm, loading space of 0.2 mm, and milling depth of 0.3 mm. The quadrilateral dimensions formed by milling are highly similar to those of a dung beetle body proving that a certain reduction in milling process depth can increase the structural fatigue resistance. From the perspective of fatigue crack growth analysis, the quadrilateral dimples on the surface of the dung beetle improve fatigue crack growth inhibition and fatigue resistance.

9 February 2024 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Verified
Journal Article
Closed access
Youzheng CuiYouzheng Cui
Youzheng Cui
CLChengxin Liu
Chengxin Liu
HMHaijing Mu
Haijing Mu
YLYinfeng Liu
Yinfeng Liu
HJHui Jiang
Hui Jiang
QHQingming Hu
Qingming Hu
Several studies have evaluated the thermal error modeling and structural characteristics of the swing angle milling head; however, few studies have reported the thermodynamic characteristics of the swing angle milling head. Therefore, based on the thermodynamic theory, the thermodynamic characteristics of the mechanical A/C swing angle milling head of the five axis CNC gantry milling machine are evaluated, and the relevant heating calculation results are obtained. The temperature field distribution and thermodynamic characteristics of the swing angle milling head were simulated and analyzed by using ANSYS Workbench finite element software. In addition, the accuracy and rationality of the finite element simulation results of this study are verified based on the experimental conclusions of other relevant scholars that the maximum temperature of the gear is also mainly distributed near the pitch line of the tooth surface. The research results indicate that the maximum heat generation area inside the swing angle milling head is mainly concentrated on the pitch line of the bevel gear tooth surface of the main spindle execution component, with a maximum temperature of 43.559°C. The maximum thermal deformation is located at the tip of the swing angle milling head, with a maximum thermal deformation of 1.8353 × 10−5 m, this study can provide important theoretical reference and data support for the structural optimization and thermal deformation control of subsequent swing angle milling heads.

27 May 2025 in Lubricants
Verified
Journal Article
Open access
PDF file
Youzheng CuiYouzheng Cui
Youzheng Cui
BYBingyang Yan
Bingyang Yan
MZMinli Zheng
Minli Zheng
HMHaijing Mu
Haijing Mu
CLChengxin Liu
Chengxin Liu
QHQingming Hu
Qingming Hu
In the process of heavy-duty cutting, the reciprocating motion of the sliding guide pair surface is prone to local wear, which seriously affects the overall machining accuracy and service life of the machine tool. This study proposes a biomimetic micro-texture design scheme combining elliptical grooves and shell-shaped grooves on the surface of carp as biomimetic prototypes to enhance the oil film bearing capacity, drag reduction, and wear resistance of guide rail pairs. Based on Fluent fluid simulation research, it has been shown that this texture has a better dynamic pressure lubrication effect. We used response surface methodology to optimize the texture design parameters and further verify the accuracy of the optimal parameters with the NSGA-II genetic algorithm. The results show that under lubricated conditions, the load-bearing pressure of the combined micro-textured guide rail pair increased by 53.79%, the friction coefficient decreased by 39.04%, and the temperature decreased by 15.83%. This texture can still significantly improve drag reduction and wear resistance in a low-oil state.